Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

Courses by Provider

Delaware Energy Efficiency and Ethics 24 PDH Discount Package 2

PACKAGE NO: DE24R-03
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Air Distribution Basics and Duct Design
COURSE NO: M03-044
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Air Distribution Basics and Duct Design
Course Highlights

This online engineering PDH course discusses the information needed to design the air distribution system to deliver the proper amount of conditioned air to a space in an energy efficient house.

 

The heating, ventilation, and air-conditioning (HVAC) system is arguably the most complex system installed in a house and is responsible for a substantial component of the total house energy use. A properly sized HVAC system will provide the desired comfort and will run efficiently. Right-sizing an HVAC system includes the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. This process begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation; the load calculation is the first step of the iterative HVAC design procedure.

 

This 3 PDH online course is intended for mechanical engineers, architects, contractors and other professionals interested in learning more about air distribution and duct design for energy efficient homes.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning the different terminologies and concepts of HVAC systems that relate to air distribution
  • Understanding the performance criteria related to air distribution systems, which include temperature mixing and uniformity, supply outlets, and noise considerations
  • Understanding the design benefits of integrating the HVAC system into the early schematic design phase of the house
  • Familiarizing with the design principles of distribution systems, which include pressure drop, supply requirements, return air design, supply air outlets, duct layout, and duct sizes
Course Document
In this professional engineering CEU course, you need to review the “Advanced Strategy Guideline: Air Distribution Basics and Duct Design” prepared by Arlan Burdick-IBACOS, Inc. and published by the U.S. Department of Energy, Building America Program.
To view, print and study the course document, please click on the following link(s):
AIR DISTRIBUTION BASICS AND DUCT DESIGN (5.55 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Advancing Clean Electric Power Technologies: Solar Power
COURSE NO: R02-016
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Advancing Clean Electric Power Technologies: Solar Power
Course Highlights

This online PDH course briefly discusses the solar market and solar energy’s technical and resource potential. Also, it addresses R&D strategy and priorities, the development and status of solar technologies and markets, projected solar deployment and impacts, and solutions for high-penetration of renewable energy into the electricity grid.

 

Solar energy offers a number of strategic benefits to the United States. Replacing fossil-fuel combustion with solar energy reduces emissions of human-induced greenhouse gases and air pollutants.

 

Despite these benefits, solar energy currently supplies only a small fraction of U.S. energy needs, largely because it historically has cost more than conventional energy sources. However, solar manufacturing costs and sales prices have dropped dramatically over the past few decades, and solar technologies are approaching energy-price parity with conventional generating sources in some regions of the United States and abroad.

 

This 2 PDH online course is intended for mechanical, electrical and renewable energy engineers as well as others interested in learning more about the current solar market and solar energy’s technical and resource potential.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarization with the solar market and solar energy’s technical and resource potential
  • Familiarizing with R&D strategy and priorities
  • Understanding the development and status of solar technologies and markets
  • Understanding the nature of projected solar deployment and their impact on the U.S. electricity markets
Course Document
In this professional engineering CEU course, you need to review the document, "Advancing Clean Electric Power Technologies: Solar Power" which is based on chapter 4 of the Quadrennial Technology Review 2015 titled “Innovating Clean Energy Technologies in Advanced Manufacturing - Technology Assessments”, published by the U.S. Department of Energy.
To view, print and study the course document, please click on the following link(s):
ADVANCING CLEAN ELECTRIC POWER TECHNOLOGIES: SOLAR POWER (1.8 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Continuous Energy Improvement in Motor Driven Systems
COURSE NO: E08-007
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Continuous Energy Improvement in Motor Driven Systems
Course Highlights

This online engineering PDH course presents the fundamental information and necessary guidance required to assist the Manufacturing and Process industries in optimizing their electric motor driven systems which leads to substantial energy / cost savings.

 

Electric motors are among the least well-managed industrial equipment, even though motor-driven equipment accounts for approximately 70% of the electrical energy consumed by process industries and approximately 90% for electrical intensive industries. Motors that are not properly managed can result in billions of dollars in wasted energy and operating costs to an industry.

 

A detailed analysis of the U.S. motor systems inventory indicates that this energy use could be reduced by 11% to 18% if plant managers implement all cost-effective applications of mature and proven energy efficiency technologies and practices. It is worth noting that the suggested improvements are not necessarily limited to the U.S., but can be implemented in any industry around the world that utilizes motor driven systems.

 

This 8 PDH online course is applicable to electrical, mechanical, and industrial engineers as well as other technical personnel interested in learning more about improving the operation of motor driven systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with motor energy management and best practices
  • Understanding the different types of utility charges
  • Learning about the steps involved in conducting a motor survey
  • Familiarizing with motor specification and selection considerations
  • Estimating motor load and efficiency
  • Analyzing motor efficiency opportunities
  • Conducting plans for improving motor efficiency
  • Familiarizing with the opportunities to improve system efficiencies
  • Understanding the importance and practicality of power factor correction
Course Document
In this professional engineering CEU course, you need to review the document “Continuous Energy Improvement in Motor Driven Systems” prepared by the U.S. Department of Energy, publication number DOE/GO-102014-4357.
To view, print and study the course document, please click on the following link(s):
CONTINUOUS ENERGY IMPROVEMENT IN MOTOR DRIVEN SYSTEMS (2.45 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty (40) questions to earn 8 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Improving Process Heating Systems Performance
COURSE NO: M05-026
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Improving Process Heating Systems Performance
Course Highlights

This online engineering PDH course describes basic process heating applications and equipment, and outlines opportunities for energy and performance improvements. It also discusses the merits of using a systems approach in identifying and implementing these improvement opportunities for Fuel-Based and Electric-Based heating systems. Furthermore, it provides recommendations to financially justify process heating improvement projects (System Economics).

 

Process heating is essential in the manufacture of most consumer and industrial products, including those made out of metal, plastic, rubber, carbon fiber, concrete, glass, and ceramics. Process heating systems are broken into three basic categories: Fuel-Based Process Heating, Electric-Based Process Heating, and Steam-Based Process Heating all of which are discussed in details.

 

This 5 PDH online course is applicable to mechanical, industrial and process engineers, designers, manufacturers and all personnel involved in the planning, design and installation of process heating systems.

 

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the basics behind process heating operations
  • Familiarizing with the common types of process heating systems and equipment
  • Recognizing efficiency opportunities for fuel-based and electric-based heating systems
  • Learning how to financially justify process heating improvement projects
Course Document
In this professional engineering CEU course, you need to review the Department of Energy (DOE) Publication "Improving Process Heating System Performance" Sourcebook Third Edition.
To view, print and study the course document, please click on the following link(s):
IMPROVING PROCESS HEATING SYSTEMS PERFORMANCE (1.6 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty-five (25) questions to earn 5 PDH credits. The quiz will be based on Sections 1 to 5 and Appendix A of this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Future Energy Sources
COURSE NO: M03-047
COURSE PROVIDER: Gilbert Gedeon, P.E.
Future Energy Sources
Course Highlights

This online engineering PDH course describes the state-of-the art, cutting edge efforts by scientists and engineers in the United States who are involved with research to continue to find alternate energy sources for the future.  These energy sources will be of vital importance to sustaining and improving the quality of life on planet earth and beyond.  This course explains how the U.S. Department of Energy (DOE) leads the world in the conception, design, construction, and operation of these large-scale devices.  It also discusses that these machines have enabled U.S. researchers to make some of history's important scientific discoveries, with spin-off technological advances leading to entirely new industries.

 

Throughout its history, the Department of Energy's Office of Science has designed, constructed, and operated many of the Nation's most advanced, large-scale research and development user facilities, of importance to all areas of science.  These state-of-the-art facilities are shared with the science community worldwide and contain technologies and instrumentation that are available nowhere else.  As the steward of America's national laboratories, the Department of Energy has a special responsibility to plan for and propose Office of Science investments for the future that will serve to advance the national, energy, and economic security of the United States.

 

This 3 PDH online course is intended for engineers who are interested in current and future state-of-the art energy sources that will provide good stewardship of America's limited energy sources.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Energy Sciences Network (ESnet)
  • National Energy Research Scientific Computing (NERSC) Center
  • National Synchrotron Light Source (NSLS)
  • Advanced Light Source (ALS)
  • Advanced Photon Source (APS)
  • High Flux Isotope Reactor (HFIR) Center for Neutron Scattering
Course Document
In this professional engineering CEU course, you need to review the document titled “Four Years Later: An Interim Report on Facilities for the Future of Science: A Twenty-Year Outlook August 2007” publication by the Department of Energy (DOE) Office of Science.
To view, print and study the course document, please click on the following link(s):
FUTURE ENERGY SOURCES (2.0 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics Case Study: The Challenger Disaster
COURSE NO: LE3-001
Engineering Ethics Case Study: The Challenger Disaster
Course Highlights

This online engieering PDH course provides instruction in engineering ethics through a case study of the Space Shuttle Challenger disaster. The minimum technical details needed to understand the physical cause of the Shuttle failure are presented. The disaster itself is chronicled through NASA photographs. Next the decision-making process, especially the discussions occurring during the teleconference held on the evening before the launch, is described. Direct quotations from engineers interviewed after the disaster are used to illustrate the ambiguities of the data and the pressures that the decision-makers faced in the months and hours preceding the launch. The course culminates in an extended treatment of six ethical issues raised by Challenger.

 

This 3 PDH online course is intended for all engineers who are interested in gaining a better understanding about the ethical issues that lead to the Challenger disaster and how they could have been avoided.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Common errors to avoid in studying the history of an engineering failure: the retrospective fallacy and the myth of perfect engineering practice
  • Shuttle hardware involved in the disaster
  • Decisions made in the period preceding the launch
  • Ethical issue: NASA giving first priority to public safety over other concerns
  • Ethical issue: the contractor giving first priority to public safety over other concerns
  • Ethical issue: whistle blowing
  • Ethical issue: informed consent
  • Ethical issue: ownership of company records
  • Ethical issue: how the public perceives that an engineering decision involves an ethical violation
Course Document

In this professional engineering CEU course, you need to review the course document titled, "Engineering Ethics Case Study: The Challenger Disaster".

To view, print and study the course document, please click on the following link(s):
Engineering Ethics Case Study: The Challenger Disaster (1.46 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: