Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

Courses by Provider

Pennsylvania Geotechnical and Ethics 24 PDH Discount Package 1

PACKAGE NO: PA24G-02
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Bearing Capacity of Soils
COURSE NO: G10-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Bearing Capacity of Soils
Course Highlights

This online engineering PDH course presents the guidelines for calculation of the bearing capacity of soil under shallow and deep foundations supporting various types of structures such as buildings and houses, towers and storage tanks, fills, embankments and dams. These guidelines may be helpful in determining soils that will lead to bearing capacity failure or excessive settlements for given foundations and loads.

 

Bearing capacity is the ability of soil to safely carry the pressure placed on the soil from any engineered structure without undergoing a shear failure with accompanying large settlements. Applying a bearing pressure which is safe with respect to failure does not ensure that settlement of the foundation will be within acceptable limits. Therefore, settlement analysis should generally be performed since most structures are sensitive to excessive settlement.

 

This 10 PDH online course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel who are involved with foundation investigation and design.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the failure modes and other factors that influence the bearing capacity
  • Knowing the non-load related design considerations due to environmental and geotechnical conditions
  • Familiarizing with the laboratory and in situ methods of determining soil parameters required for analysis of bearing capacity
  • Analyzing  the bearing capacity of shallow and deep foundations
Course Document

In this professional engineering CEU course, you need to review the US Corps of Engineers Publication EM 1110-1-1905, "Bearing Capacity of Soils".

To view, print and study the course document, please click on the following link(s):
Bearing Capacity of Soils (1.37 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty five (45) questions to earn 10 PDH credits. The quiz will be based on this US Corps of Engineers publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Dam Safety Risk Management
COURSE NO: C03-060
COURSE PROVIDER: Gilbert Gedeon, P.E.
Dam Safety Risk Management
Course Highlights

This engineering online PDH covers the basic guidelines and principles of dam risk management.

 

Risk management is the overarching activity when risk is used to inform dam safety decision making and builds on risk analysis and risk assessment phases. It encompasses activities related to making risk-informed decisions, prioritizing evaluations of risk, prioritizing risk reduction activities, and making program decisions associated with managing a portfolio of facilities. Risk management includes evaluating the environmental, social, cultural, ethical, political, and legal considerations during all parts of the process.

 

This 3 PDH online course is applicable to geotechnical and civil engineers, as well as other technical personnel who are interested in gaining a better understanding of dam risk management in order to make risk-informed decisions.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about the dam safety risk management framework for decision making
  • Understanding the aspects and components of Risk Analysis (i.e. types, estimation & results)
  • Understanding the aspects and components of Risk Assessment (i.e. process, safety decision making approach & tolerable risk)
  • Understanding the aspects and components of Risk Management (i.e. objectives, urgency of action & prioritization)
  • Familiarization with the aspects and components of Risk Communication and public awareness
Course Document
In this professional engineering CEU course, you need to review "Federal Guidelines for Dam Safety Risk Management" by the Federal Emergency Management Agency (FEMA), publication FEMA P-1025, dated January 2015.
To view, print and study the course document, please click on the following link(s):
DAM SAFETY RISK MANAGEMENT (1.2 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Slope Stability
COURSE NO: G04-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Slope Stability
Course Highlights

This online engineering PDH course provides guidance for analyzing the static stability of slopes of earth and rock-fill dams, slopes of other types of embankments, excavated slopes, and natural slopes in soil and soft rock.

 

Slope stability criteria are presented for strength tests, analysis conditions, and factors of safety. The criteria are intended to be used with methods of stability analysis that satisfy all conditions of equilibrium. Methods that do not satisfy all conditions of equilibrium may involve significant inaccuracies and should be used only under the restricted conditions described herein.

 

This 4 PDH online course is applicable to geotechnical and structural engineers, as well as design and construction personnel working on projects involving slope stability analysis.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Aspects applicable to all load conditions
  • Analyses of stability during and at the end of construction
  • Analyses of steady-state seepage conditions
  • Analyses of sudden drawdown stability
  • Analysis of stability during earthquakes
  • Design criteria for existing and new embankments
  • Design criteria of other slopes
  • Presentation of various types of analysis and results
Course Document

In this professional engineering CEU course, you need to review Chapters 1 through 4 of the US Corps of Engineers Publication EM 1110-2-1902, "Slope Stability".

To view, print and study the course document, please click on the following link(s):
Slope Stability (7.10 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Chapters 1 through 4 of this publication. The appendices are provided for reference only.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Tunnel Operations, Maintenance, Inspection, and Evaluation Manual: Operations
COURSE NO: C01-019
COURSE PROVIDER: Gilbert Gedeon, P.E.
Tunnel Operations, Maintenance, Inspection, and Evaluation Manual: Operations
Course Highlights

This online engineering PDH course presents essential roles and responsibilities of the tunnel staff, normal operating procedures, and emergency response guidelines for vehicle collisions, fires, explosions, floods and earthquakes.

 

Operating requirements vary among tunnel facilities because of the traffic level, the feasibility of alternative routes, accessibility to existing utilities, availability of emergency responders, and other conditions specific to each tunnel. Functional systems within the tunnel must be integrated with operational procedures to include the mechanical equipment, electrical components, lighting fixtures, fire and life safety systems, signs and security equipment installed within the tunnel.

 

This 1 PDH online course is applicable to civil and structural engineers, as well as design personnel and staff involved in the operation of tunnel systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the essential roles and responsibilities of the tunnel staff
  • Familiarization with normal tunnel operating procedures
  • Understanding the emergency response guidelines for vehicle collisions, fires, explosions, floods, and earthquakes
Course Document
In this professional engineering CEU course, you need to review the document “TOMIE Manual – Chapter 2: Operations” by the Federal Highway Administration (FHWA) agency within the U.S. Department of Transportation.
To view, print and study the course document, please click on the following link(s):
TUNNEL OPERATIONS, MAINTENANCE, INSPECTION, AND EVALUATION MANUAL: OPERATIONS (603 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on Chapter 2 of this FHWA Publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Tunnel Operations, Maintenance, Inspection, and Evaluation Manual: Maintenance
COURSE NO: C02-074
COURSE PROVIDER: Gilbert Gedeon, P.E.
Tunnel Operations, Maintenance, Inspection, and Evaluation Manual: Maintenance
Course Highlights

This engineering online PDH course will provide an overview on effective maintenance considerations of tunnel systems and the associated components.

 

An effective maintenance program helps reduce costs, decrease the number of tunnel closures, increase public safety, and ensure adequate levels of service. To maximize efficient use of resources and minimize costs, maintenance programs should be optimized. When large-scale repairs and upgrades are implemented, these projects are typically referred to as tunnel rehabilitation.

 

This 2 PDH online course is applicable to civil and structural engineers, as well as design and construction personnel involved with the maintenance process of tunnel systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the fundamental causes of deterioration and corrosion in tunnels.
  • Familiarization with the methods aimed at controlling groundwater seepage.
  • Familiarization with the repair techniques and rehabilitation schemes.
Course Document
In this professional engineering CEU course, you need to review the document “TOMIE Manual – Chapter 3: Maintenance” by the Federal Highway Administration (FHWA) agency within the U.S. Department of Transportation.
To view, print and study the course document, please click on the following link(s):
TUNNEL OPERATIONS, MAINTENANCE, INSPECTION, AND EVALUATION MANUAL: MAINTENANCE (1.2 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on Chapter 3 of this FHWA Publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Trenching and Excavation Safety
COURSE NO: C02-072
COURSE PROVIDER: Gilbert Gedeon, P.E.
Trenching and Excavation Safety
Course Highlights

This online engineering PDH course provides guidance on the requirements for excavation and trenching operations. This course describes safe work practices that can protect workers from cave-ins and other hazards.

 

Trenching and excavation work presents serious hazards to all workers involved. Cave-ins pose the greatest risk and are more likely than some other excavation-related incidents to result in worker fatalities. One cubic yard of soil can weigh as much as a car. An unprotected trench can be an early grave. Employers must ensure that workers enter trenches only after adequate protections are in place to address cave-in hazards.  Other potential hazards associated with trenching work include falling loads, hazardous atmospheres and hazards from mobile equipment. Following the requirements of OSHA Excavation standards will prevent or greatly reduce the risk of cave-ins and other excavation-related incidents.

 

This 2 PDH online course is intended for employers/business owners, engineers, managers, construction workers and any other personnel working on construction projects involving trenching and excavation safety.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the different risks and dangers of trenching and excavation operations
  • Understanding the OSHA Excavation standards and how they protect workers
  • Pre-planning excavation work
  • Learning the basics of protective systems
Course Document
In this professional engineering CEU course, you need to review the document “Trenching and Excavation Safety” prepared by the U.S. Department of Labor, Occupational Safety and Health Administration OSHA 2226-10R 2015.

 

To view, print and study the course document, please click on the following link(s):
TRENCHING AND EXCAVATION SAFETY (307 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for Pennsylvania Professional Engineers
COURSE NO: PA2-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for Pennsylvania Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to Pennsylvania Professional Engineers.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of Pennsylvania. Excerpts from Pennsylvania ACT 367 as well as Chapter 37 of the Pennsylvania Code, which relate to the rules of profession conduct, continuing education requirements, proper use of seal and other pertinent regulatory provisions are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

This 2 PDH  online course is applicable to Pennsylvania Professional Engineers who face different situations on daily basis while practicing engineering. This course will provide moral and ethical guidance to engineers in their decision making process. Most importantly, it will provide engineers with insight on how to respect and protect their profession with utmost professionalism.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Overview of the laws and rules regulating to the practice of engineering in the State of Pennsylvania and their application to Professional Engineers
  • Understanding the roles of the Pennsylvania Board and its disciplinary authority
  • Learning about engineering ethics and the rules of professional conduct and responsibility
  • Understanding the continuing education requirements, proper use of seal and more in the State of Pennsylvania
  • Understanding the Pennsylvania Board disciplinary process
  • Review of the disciplinary cases and along the range of violations and corresponding penalties imposed by the Pennsylvania Board
Course Document

In this professional engineering CEU course, you need to review the course document titled "Engineering Ethics for Pennsylvania Professional Engineers".

To view, print and study the course document, please click on the following link(s):
Engineering Ethics for Pennsylvania Professional Engineers (244 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twelve (12) questions to earn 2 PDH credits. The quiz will be based on the entire document.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: