Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

North Carolina Geotechnical and Ethics 15 PDH Discount Package 1

PACKAGE NO: NC15G-04
PACKAGE PDH: 15
PACKAGE PRICE: $216
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Bearing Capacity of Soils
COURSE NO: G10-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Bearing Capacity of Soils
Course Highlights

This online engineering PDH course presents the guidelines for calculation of the bearing capacity of soil under shallow and deep foundations supporting various types of structures such as buildings and houses, towers and storage tanks, fills, embankments and dams. These guidelines may be helpful in determining soils that will lead to bearing capacity failure or excessive settlements for given foundations and loads.

 

Bearing capacity is the ability of soil to safely carry the pressure placed on the soil from any engineered structure without undergoing a shear failure with accompanying large settlements. Applying a bearing pressure which is safe with respect to failure does not ensure that settlement of the foundation will be within acceptable limits. Therefore, settlement analysis should generally be performed since most structures are sensitive to excessive settlement.

 

This 10 PDH online course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel who are involved with foundation investigation and design.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the failure modes and other factors that influence the bearing capacity
  • Knowing the non-load related design considerations due to environmental and geotechnical conditions
  • Familiarizing with the laboratory and in situ methods of determining soil parameters required for analysis of bearing capacity
  • Analyzing  the bearing capacity of shallow and deep foundations
Course Document

In this professional engineering CEU course, you need to review the US Corps of Engineers Publication EM 1110-1-1905, "Bearing Capacity of Soils".

To view, print and study the course document, please click on the following link(s):
Bearing Capacity of Soils (1.677 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty five (45) questions to earn 10 PDH credits. The quiz will be based on this US Corps of Engineers publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Dam Safety Risk Management
COURSE NO: C03-060
COURSE PROVIDER: Gilbert Gedeon, P.E.
Dam Safety Risk Management
Course Highlights

This engineering online PDH covers the basic guidelines and principles of dam risk management.

 

Risk management is the overarching activity when risk is used to inform dam safety decision making and builds on risk analysis and risk assessment phases. It encompasses activities related to making risk-informed decisions, prioritizing evaluations of risk, prioritizing risk reduction activities, and making program decisions associated with managing a portfolio of facilities. Risk management includes evaluating the environmental, social, cultural, ethical, political, and legal considerations during all parts of the process.

 

This 3 PDH online course is applicable to geotechnical and civil engineers, as well as other technical personnel who are interested in gaining a better understanding of dam risk management in order to make risk-informed decisions.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about the dam safety risk management framework for decision making
  • Understanding the aspects and components of Risk Analysis (i.e. types, estimation & results)
  • Understanding the aspects and components of Risk Assessment (i.e. process, safety decision making approach & tolerable risk)
  • Understanding the aspects and components of Risk Management (i.e. objectives, urgency of action & prioritization)
  • Familiarization with the aspects and components of Risk Communication and public awareness
Course Document
In this professional engineering CEU course, you need to review "Federal Guidelines for Dam Safety Risk Management" by the Federal Emergency Management Agency (FEMA), publication FEMA P-1025, dated January 2015.
To view, print and study the course document, please click on the following link(s):
DAM SAFETY RISK MANAGEMENT (2.6 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Durability of Geosynthetics for Highway Applications
COURSE NO: C01-018
COURSE PROVIDER: Gilbert Gedeon, P.E.
Durability of Geosynthetics for Highway Applications
Course Highlights

This online engineering PDH course presents a study that addresses various aspects of geosynthetic durability to develop procedures that could be used to predict long-term strength losses of geosynthetics used in highway applications. These procedures are essential to designers for allowing tensile capacity for geosynthetics used primarily in mechanically stabilized earth (MSE) retaining walls, reinforced soil slopes, and foundation stabilization.

 

This study was initiated to allow voiced concerns that stress-cracking potential was not being considered in developing the allowable tension load capacity for design when using high-density polyethylene (HDPE) geogrids. Stress cracking is a potential mode of failure occurring in thermoplastic materials that are under a sustained stress significantly lower than the material’s room temperature yield strength, resulting in quasi-brittle fracture of the material. This is also known as slow crack growth and environmental stress cracking (ESC) when in contact with certain aqueous solutions.

 

This 1 PDH online course is applicable to all civil engineers, highway design professionals, transportation planners, material manufacturers and all personnel interested in learning about geosynthetics for highway applications.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Developing testing protocols necessary to quantify any strength reduction due to aging or stress mechanisms for geosynthetics
  • Developing testing protocols for confined stress-strain testing, which could more accurately characterize key engineering properties
Course Document
In this professional engineering CEU course, you need to review the Federal Highway Administration (FHWA) Report No. FHWA-RD-97-142, "Durability of Geosynthetics for Highway Applications”.
To view, print and study the course document, please click on the following link(s):
Durability of Geosynthetics for Highway Applications (208 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this FHWA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for North Carolina Professional Engineers
COURSE NO: NC1-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for North Carolina Professional Engineers
Note: This 1 PDH engineering ethics course is applicable only to North Carolina Professional Engineers. It is also offered as a 1 PDH recorded video presentation and as a 1 PDH live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of North Carolina.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Excerpts from the North Carolina Engineering and Land Surveying Act, Chapter 89C and Title 21, Chapter 56 of the North Carolina Administrative Code which relate to the rules of profession conduct, continuing education requirements, proper use of seal and other pertinent regulatory provisions are presented in this course.

 

This 1 PDH online course is applicable to Professional Engineers licensed in the State of North Carolina and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal (effective 2024). For each renewal period, every licensee must complete fifteen (15) professional development hours, at least one of which must be in ethics or rules of professional conduct.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the laws and rules regulating the practice of engineering in the State of North Carolina
  • Learning about engineering ethics, the rules of professional conduct and responsibility
  • Understanding the role of the North Carolina Board and its disciplinary authority
  • Understanding the continuing education requirements and proper use of seal in the State of North Carolina
  • Gaining an overview of disciplinary cases, violations and their corresponding penalties imposed by the North Carolina Board
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Engineering Ethics for North Carolina Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
ENGINEERING ETHICS FOR NORTH CAROLINA PROFESSIONAL ENGINEERS (500 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: