Interactive & Video Discount Package - Alaska Civil and Ethics 24 PDH
Concrete Pavement Preservation - Part II (C02-303)
Construction Site Storm Water Control (C03-303)
Groundwater Hydrology - Part 1 (C01-302)
Groundwater Hydrology - Part 2 (C02-301)
Post Construction Storm Water Management - Structural BMPs (C03-302)
Open Channel Hydraulics I: The Manning Equation (C03-104V)
Flow Measurement in Pipes and Ducts (C03-103V)

This online engineering PDH interactive presentation provides guidance on pavement preservation concepts, pavement evaluation, and strategy selection procedures.
The need for the effective management of transportation assets has never been greater. In an era of an aging infrastructure, ever-increasing traffic demands, and shrinking budgets, transportation agencies are continually being asked to “do more with less” in maintaining the condition of their facilities.
Pavements represent a large part of that transportation infrastructure, and the need for their effective management is just as acute. Pavements that are left to deteriorate without timely preservation or maintenance treatments are likely to require major rehabilitation and reconstruction much sooner, and those are costly and disruptive activities.
This 2 PDH online interactive presentation is intended primarily for structural and transportation engineers, design and construction personnel, and other technical professionals who are involved in concrete pavement preservation.
This continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Defining pavement preservation.
- Understanding the importance of pavement management data in project and treatment selection.
- Identifying the major components of the pavement evaluation process and the types of information gained from each.
- Gaining an overview of the critical factors to consider in the selection of concrete pavement preservation treatments.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides guidance on two pavement preservation treatments: slab stabilization and slab jacking, and retrofitted edgedrains.
The need for the effective management of transportation assets has never been greater. In an era of an aging infrastructure, ever-increasing traffic demands, and shrinking budgets, transportation agencies are continually being asked to “do more with less” in maintaining the condition of their facilities.
Pavements represent a large part of that transportation infrastructure, and the need for their effective management is just as acute. Pavements that are left to deteriorate without timely preservation or maintenance treatments are likely to require major rehabilitation and reconstruction much sooner, and those are costly and disruptive activities
This 2 PDH online interactive presentation is intended primarily for structural and transportation engineers, design and construction personnel, and other technical professionals who are involved in concrete pavement preservation.
This continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- List benefits of slab stabilization and slab jacking
- Describe recommended materials and mixtures for stabilization and slab jacking
- Identify recommended construction activities for stabilization and slab jacking
- Identify typical construction problems and remedies in relaton to slab stabilization and slab jacking
- List the benefits and issues associated with retrofitted edgedrains
- List the components of edgedrain systems
- Describe recommended installation procedures for edgedrain systems
- Identify typical construction problems and remedies in relation to retrofitted edgedrains
Once you finish watching the PDH interactive presentation, you will be redirected to your account to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on this interactive presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation explains how to preserve land as well as water characteristics by controlling erosion and sediment due to site storm water runoff in a construction site.
EPA recommends that land disturbance is kept minimal during any construction activity. Therefore, an effective storm water management program is essential to reduce the effect of pollutants in any storm water runoff. “Construction Site Storm Water Runoff Control” is classified as one of the most effective Best Management Practices to be used by personnel of small MS4s.
This 3 PDH online interactive presentation is intended primarily to all personnel responsible for the implementation of runoff controls for storm water runoff from construction sites including but not limited to, municipality owners and/or operators, construction contractors and their staff, site developers and investors, and engineers.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Understanding how runoff control is performed
- Learning about the different methods to control erosion
- Learning how to control sediment
- Gaining an overview of the good housekeeping practices
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides an overview on the occurrence and movement of groundwater. Procedures for planning and managing a site characterization and modeling study are then presented.
In the past 10 years, significant technical progress has been made in the field of computer modeling of groundwater flow. These new modeling technologies have had widespread applications within the field. Similar to many field applications, it is not possible to provide specific instructions and/or specific procedures that are universally applicable to every situation that may be encountered. Therefore, this course emphasizes the use of sound judgement and the development of a good understanding of basic groundwater concepts rather than providing specific guidelines.
This 1 PDH online interactive presentation is applicable to civil and environmental engineers, as well as design and construction personnel involved with the study and analysis of groundwater flow.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Studying the occurrence and movement of groundwater
- Planning a groundwater investigation and modeling study
- Understanding the purpose and applicability of a groundwater study
- Providing general guidelines for performing a site characterization, and integrating hydrogeologic information into a computer model.
Once you finish watching the PDH interactive presentation, you will be redirected to your account to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this interactive presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides an overview of the technical aspects of field investigative methods and computer modeling that are often employed to quantify the water exchange between the surface and subsurface.
This presentation also discusses the current technology available for carrying out simulations of the interaction between surface water and groundwater that are required for the numerical modeling of groundwater flow.
In the past 10 years, significant technical progress has been made in the field of computer modeling of groundwater flow. These new modeling technologies have had widespread applications within the field. Similar to many field applications, it is not possible to provide specific instructions and/or specific procedures that are universally applicable to every situation that may be encountered. Therefore, this course emphasizes the use of sound judgement and the development of a good understanding of basic groundwater concepts rather than providing specific guidelines.
This 2 PDH online interactive presentation is applicable to civil and environmental engineers, as well as design and construction personnel involved with the study and analysis of groundwater flow.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Gaining an overview of the distribution and movement of water in the subsurface
- Presenting practical analytical methods which quantify the interaction between surface water and groundwater
- Understanding the computer modeling of groundwater flow based on the quantified interaction
- Providing key references to allow for a more detailed understanding of concepts and applications
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation presents a combination of structural best management practices appropriate to address storm water runoff from new development and redevelopment projects disturbing land characteristics.
EPA recommends that you ensure the appropriate implementation of the structural Best Management Practices, in order to provide new development and potentially redevelopment with more opportunities for water quality protection, by considering some or all of the following: preconstruction review of BMP designs; inspections during construction to verify BMPs are built as designed; post-construction inspection and maintenance of BMPs; and penalty provisions for the noncompliance with design, construction or operation and maintenance.
Structural BMPs include: storage practices such as wet ponds and extended-detention outlet structures; filtration practices such as grassed swales, sand filters and filter strips; and infiltration practices such as infiltration basins and infiltration trenches.
This 3 PDH online interactive presentation is intended primarily to all personnel responsible for the implementation of best management practices for post construction storm water management including but not limited to, municipality owners and/or operators, construction contractors and their staff, site developers and investors, and engineers.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Familiarizing with the basic structure ponds
- Learning about the different infiltration practices
- Learning about the various filtration practices
- Gaining an overview of vegetative practices
- Understanding what are runoff pretreatment practices
Once you finish watching the PDH interactive presentation, you will be redirected to your account to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on this interactive presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This 2 PDH online video presentation presents the general laws of professional responsibility and ethics governing the practice of engineering in the Unites States.
The first hour begins by looking at the general ethical expectations of professional engineers with practical applications for each followed by a series of disciplinary cases of engineers disregarding these ethical canons with their resulting professional penalties.
The second hour is all engineering-based ethical case studies selected to stimulate thought and encourage maximum interaction between participants and the presenter.
This 2 PDH online video presentation is intended for all US-licensed professional engineers who must prove continuing professional competency in engineering ethics as a condition of their license renewal.
This PE continuing education video presentation is intended to provide you with the following specific knowledge and skills:
- Understanding the basic canons of professional engineering ethics in the United States
- Learning about the potential penalties in various states for violating their rules for practice
- Stimulate thinking and analysis on various engineering ethics-related case studies
- Learning about different ethical situations and examining our reactions to them
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

Note: This PDH course is a recorded video presentation.
This online engineering PDH video presentation focuses on the basic nature of flow in open channels and common ways of classifying open channel flow (laminar or turbulent, steady state or unsteady state, uniform or non-uniform, and critical, subcritical or supercritical). It presents several worked examples to gain practice in the use of the Manning equation for a variety of uniform open channel flow calculations.
Flow of water may take place either as open channel flow or pressure flow. Pressure flow takes place in a closed conduit such as a pipe, and pressure is the primary driving force for the flow. For open channel flow, on the other hand, the flowing liquid has a free surface that is at atmospheric pressure and the driving force is gravity. Open channel flow takes place in natural channels like rivers and streams. It also occurs in manmade channels such as those used to transport wastewater or irrigation water and in circular sewers flowing partially full.
This 3 PDH online video presentation is intended primarily for civil, hydraulic, highway, environmental, chemical, mechanical, and industrial engineers, who are interested in learning more about open channel hydraulics.
This PE continuing education video presentation is intended to provide you with the following specific knowledge and skills:
- Understanding the difference between laminar and turbulent flow, steady state and unsteady state, as well as uniform and non-uniform open channel flow
- Calculating the hydraulic radius for flow of specified depth in an open channel with specified cross-sectional shape and size
- Calculating the Reynolds number for a specified open channel flow and determine whether the flow is laminar or turbulent flow
- Determining a value for the Manning roughness coefficient for flow in manmade or natural channels using the example tables provided in this course
- Using the Manning equation to calculate volumetric flow rate, average velocity, Manning roughness coefficient, or channel bottom slope, if given adequate information about a reach of an open channel
- Using the Manning equation with an iterative procedure to calculate normal depth for a specified volumetric flow rate, channel bottom slope, channel shape and size, and Manning roughness coefficient for a reach of open channel flow
- Performing calculations for full or partial full flow under gravity in a circular pipe
For this professional engineering CEU course, you will need to watch the video presentation titled, “Open Channel Hydraulics I: The Manning Equation”. To access the video presentation, you will need to log in or register and purchase the course. Following course purchase, please click on the link provided in your account history to view the video presentation. The duration of the video presentation is approximately 109 minutes.
Once you are finished watching the PDH video presentation, you will need to close or minimize the video portal to return to your account and click on “Take Quiz”. You will need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this video presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH video presentation focuses on the measurement of the flow rate of a fluid flowing under pressure in a closed conduit. It discusses the several categories of pipe flow measurement devices along with some associated example calculations for differential pressure flow meters and pitot tubes. It addresses the general principles of operation for each type of flow meter and general advantages and disadvantages of each.
Measurement of the flow rate of a fluid flowing under pressure (closed conduit) is carried out for a variety of purposes, such as billing for water supply to homes or businesses, or for monitoring or process control of a wide variety of industrial processes that involve flowing fluids. The closed conduit is often circular, but also may be square or rectangular (such as a heating duct) or any other shape.
This 3 PDH online video presentation is intended primarily for civil, environmental, chemical, mechanical, and industrial engineers, who are interested in learning more about flow measurement in a closed conduit.
This PE continuing education video presentation is intended to provide you with the following specific knowledge and skills:
- Calculating the flow rate from measured pressure difference, fluid properties, and meter parameters, using the equations for venturi, orifice and flow nozzle meters
- Determining which type of ISO standard pressure tap locations are being used for a given orifice meter
- Calculating the orifice coefficient, Co, for specified orifice and pipe diameters, pressure tap locations and fluid properties
- Estimating the density of a specified gas at specified temperature and pressure using the Ideal Gas Equation
- Calculating the velocity of a fluid for given pitot tube reading and fluid density.
- Knowing the general configuration and principle of operation of rotameters and positive displacement, electromagnetic, target, turbine, vortex and ultrasonic meters
- Knowing the recommended applications for each of the types of flow meters
- Familiarizing with the general characteristics of the types of flow meters
For this professional engineering CEU course, you will need to watch the video presentation titled, “Flow Measurement in Pipes and Ducts”. To access the video presentation, you will need to log in or register and purchase the course. Following course purchase, please click on the link provided in your account history to view the video presentation. The duration of the video presentation is approximately 109 minutes.
Once you are finished watching the PDH video presentation, you will need to close or minimize the video portal to return to your account and click on “Take Quiz”. You will need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this video presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.