Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Ohio Mechanical and Ethics 30 PDH Discount Package 2

PACKAGE NO: OH30M-02
PACKAGE PDH: 30
PACKAGE PRICE: $324
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Basic Machines Part 1
COURSE NO: M03-035
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Basic Machines Part 1
Course Highlights

This online engineering PDH course discusses the six simple machines: the lever, the block, the wheel and axle, the inclined plane, the screw and the gear. When you familiarize with the principles of these simple machines, you can readily understand the operation of complex machines.

 

A machine is any device that helps you to do work. It may help by changing the amount of force or the speed of action. Machines may also be used to change the direction of a force or in other cases transform energy; for example, a generator transforms mechanical energy into electrical energy. Complex machines are basically combinations of two or more simple machines.

 

This 3 PDH online course is applicable to engineers, designers, manufacturers and anyone interested to gain an understanding of basic machine operation.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about the principles of levers, their different classes and mechanical advantages
  • Understanding the basics of the block and tackle, their different configurations and mechanical advantages
  • Understanding the basics of wheel and axle and understand their mechanical advantages
  • Learning about the mechanical advantages of inclined planes
  • Familiarizing with the uses of the screw and jack
  • Understanding the basics of gears, their different types and mechanical advantages
Course Document

In this professional engineering CEU course, you need to review Chapters 1 through 6, of the Naval Education and Training Professional Development and Technology Center "Basic Machines" NAVEDTRA 14037 - training course.

To view, print and study the course document, please click on the following link(s):
Basic Machines - Part 1 (1.6 MB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this NAVEDTRA publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Basic Machines Part 2
COURSE NO: M03-036
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Basic Machines Part 2
Course Highlights

This online engineering PDH course discusses the relationship between Work and Power and their different their applications. It also describes the relationship between Force-Pressure and their different applications. Furthermore, this course explains the basics of hydrostatic and hydraulic liquids and highlights their respective machines. The last chapter of this course illustrates the basic machine elements, identifies their respective machine functions and introduces the basics of clutches.

 

A machine is any device that helps you to do work. It may help by changing the amount of force or the speed of action. Machines may also be used to change the direction of a force or in other cases transform energy; for example, a generator transforms mechanical energy into electrical energy.

 

This 3 PDH online course is applicable to engineers, designers, manufacturers and anyone interested to gain an understanding of basic machine operations.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the relationship between Work and Power and their different applications
  • Learning how to determine horsepower ratings
  • Understanding the difference between Force and Pressure and their applications in basic machines
  • Familiarizing with the different force and pressure measuring devices
  • Understanding the difference between hydrostatic and hydraulic liquids and their applications in basic machines
  • Understanding the basic machine elements and identifying their respective functions
  • Learning about clutch basics
Course Document

In this professional engineering CEU course, you need to review Chapters 7 through 11, of the Naval Education and Training Professional Development and Technology Center "Basic Machines" NAVEDTRA 14037 - training course.

To view, print and study the course document, please click on the following link(s):
Basic Machines - Part 2 (2.4 MB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this NAVEDTRA publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Principles of an Internal Combustion Engine
COURSE NO: M03-051
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Principles of an Internal Combustion Engine
Course Highlights

This online engineering course presents the operational principles and basic mechanisms of the internal combustion engine.

 

The power of an internal combustion engine comes from burning a mixture of fuel and air in a small, enclosed space. When this mixture burns, it expands significantly; building pressure that pushes the piston down, in turn rotating the crankshaft. Eventually, this motion is transferred through the transmission and out to the drive wheels to move the vehicle.

 

The automobile is a familiar object to all of us. The engine that moves it is one of the most fascinating and talked about of all the complex machines we use today. This machine is what we call the internal combustion engine.

 

This 3 PDH online course is intended for mechanical and industrial engineers, designers, manufacturers and anyone interested in gaining a better understanding of the basics of an internal combustion engine.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the principles of operation, the different classifications, the measurements and performance standards of an internal combustion engine
  • Identifying the series of events /cycles in a gasoline engine
  • Identifying the series of events /cycles in a diesel engine
  • Understanding the differences between a four-stroke cycle engine and a two-stroke cycle engine
  • Recognizing the differences in the types, cylinder arrangements, and valve arrangements of internal combustion engines
  • Identifying the terms, engine measurements, and performance standards of an internal combustion engine
Course Document
In this professional engineering CEU course, you need to review " Principles of an Internal Combustion Engine ", which is based on Chapter 2 of the of the Naval Education and Training Materials (NAVEDTRA 14264A), Construction Mechanic Basic.
To view, print and study the course document, please click on the following link(s):
PRINCIPLES OF AN INTERNAL COMBUSTION ENGINE (1.0 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Principles of Hydraulic and Pneumatic Systems
COURSE NO: M04-043
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Principles of Hydraulic and Pneumatic Systems
Course Highlights

This online engineering course presents the basic principles of hydraulics and pneumatics along with their various components followed by discussing the maintenance procedures associated with these systems.

 

In automotive and construction equipment, the terms “hydraulic” and “pneumatic” describe a method of transmitting power from one place to another through the use of a liquid or a gas which obey certain physical laws and principles discussed in this course.

 

This 4 PDH online course is intended for mechanical and industrial engineers, as well as other technical professionals interested in gaining a better understanding of the principles of hydraulic and pneumatics systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the operating principles of hydraulic systems
  • Identifying operation characteristics, component functions, and maintenance procedures of a hydraulic system
  • Understanding the operating principles of pneumatic systems
  • Identifying operational characteristics and service procedures applicable to heavy-duty compressors
Course Document
In this professional engineering CEU course, you need to review "Hydraulic and Pneumatic Systems", which is based on Chapter 9 of the Naval Education and Training Materials (NAVEDTRA 14264A), Construction Mechanic Basic.
To view, print and study the course document, please click on the following link(s):
PRINCIPLES OF HYDRAULIC AND PNEUMATIC SYSTEMS (1.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Fundamentals of Gas Turbine Engines (GTEs)
COURSE NO: M04-041
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Fundamentals of Gas Turbine Engines (GTEs)
Course Highlights

This online engineering PDH course introduces the history and development of gas turbine engines (GTEs).

 

This course will help you become familiar with the basic concepts used by GTE designers, follow discussions of how the Brayton cycle describes the thermodynamic processes in a GTE, and learn how various conditions and design limitations affect GTE performance. This course also discusses how a GTE develops and uses hot gases under pressure.

 

This 4 PDH online course is applicable to engineers, designers, manufacturers and anyone who wants to gain an understanding of the basics of gas turbine engines. After completing the course, you should have the basic knowledge to be able to describe the principal components of GTEs and their construction, the GTE auxiliary systems, and also be familiar with the nomenclature related to GTEs and GTE technology.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the principles and basic concepts of a GTE
  • Understanding how the Brayton cycle describes the thermodynamic processes in a GTE
  • Learning how various conditions and design limitations affect GTE performance
  • Understanding how a GTE develops and uses hot gases under pressure
  • Familiarizing with the principal components of GTEs and their construction
  • Familiarizing with the GTE auxiliary systems and the  nomenclature related to GTEs and GTE technology
Course Document

In this professional engineering CEU course, you need to review Chapter 1, “Fundamentals of Gas Turbine Engines” of the Naval Education and Training Professional Development and Technology Center “Gas Turbine Systems Technician (Electrical) 3/Gas Turbine Systems Technician (Mechanical) 3, Volume 2” NAVEDTRA 14114-training course.

To view, print and study the course document, please click on the following link(s):
Fundamentals of Gas Turbine Engine (8.2 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on this NAVEDTRA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Heat Exchangers
COURSE NO: M02-001
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Heat Exchangers
Course Highlights

This online engineering PDH course describes the construction of plate heat exchangers as well as tube and shell heat exchangers. It also describes the flow patterns and temperature profiles in parallel flow, counter flow, and cross flow heat exchangers.

 

The transfer of thermal energy between fluids is one of the most important and frequently used processes in engineering. The transfer of heat is usually accomplished by means of a device known as a heat exchanger. Common applications of heat exchangers include boilers, fan coolers, cooling water heat exchangers, and condensers.

 

This 2 PDH online course is applicable to mechanical and chemical engineers, nuclear facility operators, maintenance personnel, and technical staff to fully understand the impact that their actions may have on the safe and reliable operation of facility components and systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the purpose of heat exchangers
  • Learning the different types of heat exchangers
  • Understanding heat exchanger applications
Course Document

In this professional engineering CEU course, you need to review DOE-HDBK-1018/1-93, Volume 1, Module 2 of "Mechanical Science" published by the Department of Energy.

To view, print and study the course document, please click on the following link(s):
Heat Exchangers (625 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on Module 2 of this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Overview, Installation and Maintenance of Pumps, Valves and Piping
COURSE NO: M07-004
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Overview, Installation and Maintenance of Pumps, Valves and Piping
Course Highlights

This online engineering PDH course covers the basic operating principles of pumps, discusses their different types, and explains their installation and maintenance methodologies. This course also presents the auxiliary components such as the different types of valves, piping and other accessories typically used in pump systems.

 

A pump is a device that uses an external source of power to force the fluid to move from one place to another. A pump develops no energy of its own; it merely transforms energy from the external source, such as a gasoline or electric motor, into mechanical kinetic energy, which is manifested by the motion of the fluid.

 

A valve is any device used to control fluids in a closed system, and is typed or classified according to its use in a system. This course will discuss valve construction and the most common types of valves used in the industry.

 

The control and application of fluid power would be impossible without a suitable means of conveying the fluid from the power source to the point of application. Fluid lines used for this purpose are called piping. They must be designed and installed with the same care applicable to other components of the system. To obtain this desired result, attention must be given to the various types, materials, and sizes of lines available for the fluid power system.

 

This 7 PDH online course is intended for mechanical engineers as well as others who are interested in gaining general knowledge of pumps, valves, and pipes in fluid systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the principles of pump operation
  • Familiarizing with the different types of pumps
  • Learning about the basic types and functions of valves, steam traps, and strainers
  • Knowing the different types of filters
  • Familiarizing with piping,  tubing and their associated fittings
  • Familiarizing with the different types of packing and gasket material
Course Document
In this professional engineering CEU course, you need to review the document “Overview, Installation and Maintenance of Pumps, Valves and Piping” which is based on chapter 9 "Pumps, Valves, and Piping" of the NAVEDTRA (NAVY) Fireman publication 14104A.
To view, print and study the course document, please click on the following link(s):
OVERVIEW, INSTALLATION AND MAINTENANCE OF PUMPS, VALVES AND PIPING (2.6 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty-five (35) questions to earn 7 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Steam Distribution Systems
COURSE NO: D02-008
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Steam Distribution Systems
Course Highlights

This online engineering PDH course provides a basic description of the steam distribution systems along with an overview of the main associated components.

 

A steam boiler is virtually useless for heating without a good distribution system that transports the steam to the areas that require heating. In this course, the term distribution system refers to the network of piping required to distribute steam from a boiler room (or boiler plant) through the steam pipes to the equipment using the steam. The course discusses both exterior and interior systems, including their maintenance requirements and various associated components.

 

This 2 PDH online course is applicable to industrial and mechanical engineers as well as technical personnel interested in gaining a better understanding of steam distribution systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the different types of exterior steam distribution systems
  • Familiarizing with the different types of interior steam distribution systems
  • Learning the basic components of steam distribution systems as well as their operation and maintenance considerations
Course Document
In this professional engineering CEU course, you need to review "Steam Distribution Systems", which is based on Chapter 10 of the of the Naval Education and Training Materials (NAVEDTRA 14265A), Utilitiesman Basic.
To view, print and study the course document, please click on the following link(s):
STEAM DISTRIBUTION SYSTEMS (975 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on chapter 10 of this NAVEDTRA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Ethics in Professional Practice
COURSE NO: LE2-007
Ethics in Professional Practice
Course Highlights

In this online engineering PDH course, background on the philosophical models that guide ethical behavior is discussed and then applied to specific situations in engineering codes of ethics. This course is based on the American Society of Mechanical Engineers Professional Practice Curriculum, Volume 8, Section: Engineering Ethics.

 

Many engineering organizations have drafted codes of ethics to which their members are required to commit.  Generally, these codes are quite similar and are based on a few fundamental principles which provide guidance to professional engineers in common situations. Nevertheless, there are many difficult or ambiguous situations in which the best ethical solution is difficult to determine.

 

This 2 PDH online course is intended primarily for engineers seeking to learn ethical principles and how to apply them to their professional practice.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Determining ethical behavior using several philosophical models
  • Evaluating a practical situation in terms of a professional code of ethics
  • Identifying situations that represent conflicts of interest and formulate a proper response
  • Applying the standards of professional ethics in technical communication
  • Recognizing environmental impacts of engineering work
  • Considering principles of sustainable development in the performance of professional duties
Course Document

In this professional engineering CEU course, you need to review "Ethics in Professional Practice" published by the American Society of Mechanical Engineers (ASME). (This course document is reproduced by permission of the ASME (www.asme.org). You may also download from or view this course document on the ASME's website by clicking on Ethics in Professional Practice).

To view, print and study the course document, please click on the following link(s):
Ethics in Professional Practice (835 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credit. The quiz will be based on this ASME publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: