Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

Courses by Provider

New Mexico Civil and Ethics 30 PDH Discount Package 2

PACKAGE NO: NM30C-11
PACKAGE PDH: 30
PACKAGE PRICE: $324
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Roller Compacted Concrete
COURSE NO: S08-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Roller Compacted Concrete
Course Highlights

This online engineering PDH course provides information and guidance on the use of RCC in dams and other civil works structures. Elements discussed include investigation and selection of materials, mixture proportioning, design and construction considerations, construction equipment and techniques, inspection, and performance.

 

The American Concrete Institute (ACI) defines roller-compacted concrete (RCC) as "concrete compacted by roller compaction; concrete that, in its unhardened state, will support a roller while being compacted." Properties of hardened RCC can be similar to those of conventionally placed concrete. However, RCC can also be made with hardened properties that are outside the range of typical properties of conventionally placed concrete. The term "roller compaction" is also defined by ACI as "a process for compacting concrete using a roller, often a vibrating roller."

 

RCC may be considered for application where no-slump concrete can be transported, placed, and compacted using earth and rock-fill construction equipment. Ideal RCC projects will involve large placement areas, little or no reinforcement, and little or no embedded metal work or other discontinuities such as piles. Application of RCC should be considered when it is economically competitive with other construction methods. It may be considered in lieu of gabions or riprap for bank protection, especially in those areas where riprap is scarce. It may be considered for large work pads, aprons, or paved areas, massive open foundations, base slabs, cofferdams, massive backfill, emergency repairs, and overtopping protection for  embankment dams. It may be used in lieu of conventionally placed concrete in concrete gravity and arch-gravity dams. RCC may be considered for use in levees where foundations are adequate and may also be used in caps for jetties to reduce the amount of required rock.

 

This 8 PDH online course is applicable to civil, structural or geotechnical engineers, as well as design and construction personnel involved with the planning, design, construction of roller-compacted concrete structures.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • RCC applications, objectives and advantages
  • Investigation and selection of materials
  • Mixture proportioning considerations and selection
  • Understanding the properties of RCC
  • Design and construction considerations
  • Construction methods and equipment
  • Quality control and quality assurance in RCC construction
  • RCC performance
Course Document

In this professional engineering CEU course, you need to review the US Corps of Engineers Publication EM 1110-2-2006, "Roller Compacted Concrete".

To view, print and study the course document, please click on the following link(s):
Roller Compacted Concrete (1.43 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifty (50) questions to earn 8 PDH credits. The quiz will be based on this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Curing Portland Cement Concrete Pavements
COURSE NO: C05-006
COURSE PROVIDER: Gilbert Gedeon, P.E.
Curing Portland Cement Concrete Pavements
Course Highlights

This online engineering PDH course provides guidance on details of concrete curing practice as they pertain to construction of Portland cement concrete pavements. It is organized around the major events in curing pavements: curing immediately after placement (initial curing), curing during the period after final finishing (final curing), and termination of curing and evaluation of effectiveness of curing.

 

Curing has long been recognized as an important process in constructing durable concrete pavements. Proper curing allows the concrete to develop its potential strength and durability. Inadequate curing can result in surface damage in the form of plastic shrinkage cracking, spalling, and erosion of paste. Since many variables influence the choice of curing materials and when and how to apply curing, the material presented places particular emphasis on attention to details with respect to moisture retention and concrete temperature control.

 

This 5 PDH  online  course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel involved with the design and installation of concrete pavements.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Selection of curing materials and procedures
  • Analysis of concrete properties and jobsite conditions
  • Knowing how to adjust the curing practice to account for specific project conditions
Course Document

In this professional engineering CEU course, you need to review the Federal Highway Administration Publication FHWA-RD-02-099, "Guide for Curing of Portland Cement Concrete Pavements". 

To view, print and study the course document, please click on the following link(s):
Curing Portland Cement Concrete Pavements (700 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 5 PDH credits. The quiz will be based on this FHWA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Hydrologic Analysis of Interior Areas
COURSE NO: C11-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Hydrologic Analysis of Interior Areas
Course Highlights

This online engineering PDH course provides guidance in hydrologic analysis of interior areas for planning, design investigations, and flood risk reduction.

 

Floods have social, environmental, and economic consequences and they directly impact people and communities. Some of the immediate impacts of flooding includes loss of human life, loss of livestock, and damages to properties and crops.

 

This course provides information of interest to planners and designers of interior system involving flood loss reduction measures and actions. Interior area investigations are differentiated from other studies only by the uniqueness of the hydrologic analysis requirements for the flood loss reduction measures commonly used. Interior area planning studies are an essential aspects of feasibility studies.

 

This 11 PDH online course is applicable to civil, environmental, and stormwater management engineers as well as other technical personnel interested in learning more about hydrologic analysis of interior areas.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the basic concepts and considerations pertinent to hydrologic studies of interior areas
  • Learning the approaches, strategies, and requirements of interior hydrologic engineering studies
  • Learning about the analysis methods and procedures for riverine and coastal interior areas
  • Familiarizing with flood risk management measures
  • Learning about the analysis of residual risk and resiliency
  • Learning about a case example of the coincident frequency
Course Document

In this professional engineering CEU course, you need to review the US Corps of Engineers Publication EM 1110-2-1413 "Hydrologic Analysis of Interior Areas".

To view, print and study the course document, please click on the following link(s):
HYDROLOGIC ANALYSIS OF INTERIOR AREAS (5.35 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifty-five (55) questions to earn 11 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Groundwater Resources: Springs and Wells
COURSE NO: C04-035
Groundwater Resources: Springs and Wells
Course Highlights

This online engineering PDH course provides engineers with some of the fundamentals of planning and developing groundwater resources.  It describes the nature of groundwater, methods of obtaining it from springs or wells, and the development and maintenance of groundwater recovery systems.

 

Groundwater has many advantages over water from other sources and has considerable economic importance. The principal ways of using groundwater are through spring and well developments. A spring is a natural outflow of water from an underground supply to the ground surface.  A well (vertical or horizontal) is a hole drilled, dug, or driven into the earth to obtain groundwater.

 

This 4 PDH online course is intended for civil, construction, mechanical, and other engineers concerned with the design, development, maintenance, and construction of groundwater recovery systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Identifying sources of water supply in water-bearing materials
  • Understanding the effects of geologic structure on groundwater resources
  • Learning the principles of spring design and maintenance
  • Familiarizing with the various types of wells and their development after installation
  • Applying the principles of hydraulics, and pump selection
  • Understanding applicable state laws and groundwater rights
  • Learning the principles of contracts, specifications and abandonment
Course Document

In this professional engineering CEU course, you need to review Chapter 12, “Springs and Wells” of the USDA Natural Resources Conservation Service document, “Part 650–Engineering Field Handbook, Pub. #210-VI-NEH, July, 2012.

To view, print and study the course document, please click on the following link(s):
Groundwater Resources: Springs and Wells (4.46 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 4 PDH credits. The quiz will be based on this USDA Publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Ethics in Professional Practice
COURSE NO: LE2-007
Ethics in Professional Practice
Course Highlights

In this online engineering PDH course, background on the philosophical models that guide ethical behavior is discussed and then applied to specific situations in engineering codes of ethics. This course is based on the American Society of Mechanical Engineers Professional Practice Curriculum, Volume 8, Section: Engineering Ethics.

 

Many engineering organizations have drafted codes of ethics to which their members are required to commit.  Generally, these codes are quite similar and are based on a few fundamental principles which provide guidance to professional engineers in common situations. Nevertheless, there are many difficult or ambiguous situations in which the best ethical solution is difficult to determine.

 

This 2 PDH online course is intended primarily for engineers seeking to learn ethical principles and how to apply them to their professional practice.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Determining ethical behavior using several philosophical models
  • Evaluating a practical situation in terms of a professional code of ethics
  • Identifying situations that represent conflicts of interest and formulate a proper response
  • Applying the standards of professional ethics in technical communication
  • Recognizing environmental impacts of engineering work
  • Considering principles of sustainable development in the performance of professional duties
Course Document

In this professional engineering CEU course, you need to review "Ethics in Professional Practice" published by the American Society of Mechanical Engineers (ASME). (This course document is reproduced by permission of the ASME (www.asme.org). You may also download from or view this course document on the ASME's website by clicking on Ethics in Professional Practice).

To view, print and study the course document, please click on the following link(s):
Ethics in Professional Practice (268 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credit. The quiz will be based on this ASME publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: