Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Mississippi Electrical and Ethics 15 PDH Discount Package 2

PACKAGE NO: MS15E-02
PACKAGE PDH: 15
PACKAGE PRICE: $216
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Basic Electrical Theory
COURSE NO: E04-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Basic Electrical Theory
Course Highlights

This online engineering PDH course introduces basic electrical concepts. It starts by explaining the concept of the electrostatic force and the first law of electrostatics. It defines the basic electrical terminology and its corresponding units of measure. It continues to describe the methods of producing electricity. It also describes the principle of magnetism and magnetic circuits. Finally it provides a list of basic electrical symbols used to read and interpret electrical system diagrams and schematics.

 

This 4 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the theory of electricity.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding atoms and their forces
  • Distinguishing electrical components conductors, insulators and resistors
  • Understanding voltage and current
  • Learning the units of electrical measurements
  • Identifying the methods of producing voltage
  • Understanding magnetism and magnetic circuits
Course Document

In this professional engineering CEU course, you need to review Module 1, "Basic Electrical Theory" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science". 

To view, print and study the course document, please click on the following link(s):
Basic Electrical Theory (1.2 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Module 1 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: DC Circuits, Batteries, Generators and Motors
COURSE NO: E05-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
DC Circuits, Batteries, Generators and Motors
Course Highlights

This online engineering PDH course introduces the rules associated with the reactive components of inductance and capacitance and how they affect DC circuits. It also introduces batteries and describes the types of cells used, circuit arrangements, and associated hazards. This course further describes the types of DC generators and their application in terms of voltage production and load characteristics. Finally, it illustrates the types of DC motors and includes discussions of speed control, applications, and load characteristics.

 

This 5 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the basics of DC systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding inductance and capacitance
  • Learning battery terminology, battery theory, and battery operations
  • Understanding the different types of batteries and their hazards
  • Learning DC equipment terminology and construction
  • Gaining knowledge of DC generator theory and construction
  • Understanding DC motor theory and operation
  • Learning the different types of DC motors
Course Document

In this professional engineering CEU course, you need to review Modules 3 to 6 of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science".

To view, print and study the course document, please click on the following link(s):
DC Circuits, Batteries, Generators and Motors (6.2 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty (30) questions to earn 5 PDH credits. The quiz will be based on Modules 3 to 6 of this DOE publication. 

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Motor and Drive System Basics
COURSE NO: E02-021
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Motor and Drive System Basics
Course Highlights

This online engineering PDH course presents the basics of motor and drive systems and briefly describes important terms, relationships, and system design considerations. It also describes key factors involved in motor and drive selection and system design, and provides an overview of the different types of motors and drives and their applications.

 

This 2 PDH online course is applicable to electrical and mechanical engineers, designers, contractors, building professionals and manufacturers who are involved with motor and drive systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Detecting the indications of a poor system design
  • Learning about the different types of electric motors
  • Understanding motor operating characteristics
  • Selecting motors and drives for their corresponding applications
  • Understanding load duty cycles
  • Familiarizing with common motor selection problems
Course Document
In this professional engineering CEU course, you need to review Section 1, "Motor and Drive System Basics "of the Department of Energy (DOE) Publication "Improving Motor and Drive System Performance".
To view, print and study the course document, please click on the following link(s):
Motor and Drive System Basics (845 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Electrical Test Instruments and Measuring Devices
COURSE NO: E02-003
COURSE PROVIDER: Gilbert Gedeon, P.E.
Electrical Test Instruments and Measuring Devices
Course Highlights

This online engineering PDH course describes electrical measuring devices such as voltmeters, ammeters, ohmmeters and wattmeters. It also describes test equipment such as multimeters and meggers. It discusses the electrical parameters measured and the principles of operation of common instruments.

 

This 2 PDH  online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of electrical test instruments and measuring devices.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding meter movements
  • Learning about the various electrical measuring devices (voltmeters, ammeters, ohmmeters and wattmeters)
  • Learning about the various electrical test equipment (multimeters and meggers)

 

Course Document

In this professional engineering CEU course, you need to review Module 14, "Test Instruments and Measuring Devices" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science".

To view, print and study the course document, please click on the following link(s):
Electrical Test Instruments and Measuring Devices (2.3 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on Module 14 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Ethics in Professional Practice
COURSE NO: LE2-007
Ethics in Professional Practice
Course Highlights

In this online engineering PDH course, background on the philosophical models that guide ethical behavior is discussed and then applied to specific situations in engineering codes of ethics. This course is based on the American Society of Mechanical Engineers Professional Practice Curriculum, Volume 8, Section: Engineering Ethics.

 

Many engineering organizations have drafted codes of ethics to which their members are required to commit.  Generally, these codes are quite similar and are based on a few fundamental principles which provide guidance to professional engineers in common situations. Nevertheless, there are many difficult or ambiguous situations in which the best ethical solution is difficult to determine.

 

This 2 PDH online course is intended primarily for engineers seeking to learn ethical principles and how to apply them to their professional practice.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Determining ethical behavior using several philosophical models
  • Evaluating a practical situation in terms of a professional code of ethics
  • Identifying situations that represent conflicts of interest and formulate a proper response
  • Applying the standards of professional ethics in technical communication
  • Recognizing environmental impacts of engineering work
  • Considering principles of sustainable development in the performance of professional duties
Course Document

In this professional engineering CEU course, you need to review "Ethics in Professional Practice" published by the American Society of Mechanical Engineers (ASME). (This course document is reproduced by permission of the ASME (www.asme.org). You may also download from or view this course document on the ASME's website by clicking on Ethics in Professional Practice).

To view, print and study the course document, please click on the following link(s):
Ethics in Professional Practice (835 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credit. The quiz will be based on this ASME publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: