Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

Courses by Provider

Alt./Ren. Energy 12 PDH Discount Package 2

PACKAGE NO: DP12R-10
PACKAGE PDH: 12
PACKAGE PRICE: $187.2
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Introduction to Geothermal Energy
COURSE NO: R03-014
Introduction to Geothermal Energy
Course Highlights

This online engineering PDH course discusses the various types of geothermal energy systems and their potential for providing for the energy needs of the country.

 

Geothermal energy is energy in the form of heat radiating from the Earth’s mantle. It is a sustainable, renewable, and practically inexhaustible energy source for the United States, potentially being used for electricity generation, heating, and cooling, while emitting only small amounts of greenhouse gases. Geothermal resources can be found nationwide, are “always on,” and represent a potentially vast domestic energy supply. Only a fraction of these resources have been used thus far, because of technical and non-technical barriers that constrain industry growth. In this course various types of geothermal energy systems are described, and the problems that must be solved before these systems can be widely implemented are outlined.

 

This 3 PDH online course is intended for civil, electrical, and mechanical engineers concerned with the future of the power industry.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding hydrothermal resources
  • Knowing how to characterize enhanced geothermal systems
  • Familiarizing with geothermal heat pumps
  • Understanding electric power generation
  • Familiarizing with geothermal direct use
  • Understanding the geothermal energy benefits
  • Learning the technical and non-technical barriers to geothermal development
Course Document
In this professional engineering CEU course, you need to review the course document, “Introduction to Geothermal Energy”, which is based on Chapter 2 of the U.S. Department of Energy report, “GeoVision: Harnessing the Heat Beneath our Feet”, reference DOE/EE-1306, dated 2019.
To view, print and study the course document, please click on the following link(s):
INTRODUCTION TO GEOTHERMAL ENERGY (23 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Solar Power Installations on Closed Landfills
COURSE NO: R02-005
Solar Power Installations on Closed Landfills
Course Highlights

This online engineering PDH course provides an overview of the technical and regulatory facets of constructing solar farms on closed landfills. The different types of solar technologies are discussed, and their suitability for installation on a landfill cap is indicated.  General guidance on some of the most common engineering obstacles of landfill reuse is provided.  Finally regulatory and liability issues arising from building on a brownfield or Superfund site, that has been cleaned up or is undergoing cleanup, are discussed.

 

Estimates for the total number of closed landfills in the United States run as high as 100,000.  These landfills are attractive locations for siting solar power installations because 1) landfills are typically in areas where community concerns over aesthetic impacts are less likely, 2) the land often cannot be used for other purposes such as commercial or residential development, and 3) using landfills for solar power installations removes pressure to convert greenfield sites to power production.

 

This 2 PDH online course is intended primarily for civil, electrical, environmental, and mechanical engineers involved in solar power generation projects.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about ground mounted systems
  • Understanding the different solar technologies
  • Knowing the solar system weight considerations
  • Understanding wind loading and snow loading
  • Learning about settlement
  • Understanding cover material integrity
  • Learning about side slope stability
  • Learning about renewable energy production on Superfund or brownfield sites
  • Understanding the technical complications, challenges and potential remedies
  • Learning about required permitting
  • Understanding zoning and land use
  • Learning about existing contamination and environmental site investigations
  • Understanding CERCLA liability
Course Document

In this professional engineering CEU course, you need to review the U.S. Environmental Protection Agency document, "Solar Power Installations on Closed Landfills: Technical and Regulatory Considerations", by Gabriel Sampson, September 2009. 

To view, print and study the course document, please click on the following link(s):
Solar Power Installations on Closed Landfills (1.27 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on this EPA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Residential Solar PV Energy Guide
COURSE NO: R03-015
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Residential Solar PV Energy Guide
Course Highlights

This online engineering PDH course provides information on solar photovoltaic (PV) technology, and presents a series of steps that will help you reach a well-informed conclusion about making an investment in solar energy systems.

 

Solar PV technology is the process that converts sunlight into electrical current when it strikes suitable materials called semiconductors in a device. Sunlight is absorbed by semiconducting materials, such as silicon, releasing electrons from their atoms. The electrons flow through the semiconductor to produce direct current (DC) electricity.

 

The technologies associated with the building blocks of a solar array project may seem complicated; however, the system design and construction are relatively simple and straightforward. Familiarity with the design and construction procedures is beneficial in becoming a more educated consumer and owner.

 

This 3 PDH online course is applicable to electrical and mechanical engineers as well as energy specialists who are interested in expanding their knowledge on solar PV technology and understanding the detailed considerations for installing similar systems for generating electricity.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the building blocks of solar PV systems
  • Understanding the preliminary research process prior to designing a system or purchasing its components
  • Learning about site assessment and determining the ideal conditions for the solar array
  • Understanding the different considerations for roof and ground-mounted systems
  • Learning how to formulate solar array designs, calculations and sizing requirements
  • Identifying the significant components of a solar array as part of the equipment selection process
  • Gaining a general overview of contracts, installation, maintenance and monitoring of solar energy systems
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Residential Solar PV Energy Guide”, which is based on the Iowa Energy Center Publication Home Series #5 “Solar PV Energy Guide”.
To view, print and study the course document, please click on the following link(s):
RESIDENTIAL SOLAR PV ENERGY GUIDE (4.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Wind Turbine Technology - Overview
COURSE NO: M01-009
COURSE PROVIDER: Brian McCaffrey, P.E.
Wind Turbine Technology - Overview
Course Highlights

This online engineering PDH course provides an overview of wind turbine components and design considerations for optimization of power generation.  Typical power ratings and sizes for wind turbines are explained for various residential-scale, industrial-scale, and utility-scale applications.  Additionally, the components and considerations for a typical utility-scale wind energy project are discussed.

 

This 1 PDH online course is applicable to engineers interested in obtaining a basic knowledge of wind turbine design and applications to power systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Background on wind turbine design and components
  • Relationship between wind speed and power output
  • Wind turbine optimization
  • Applications for distributed generation and bulk power delivery
Course Document

In this professional engineering CEU course you will need to review the New York State Energy Research and Development Authority (NYSERDA) Publication "Wind Turbine Technology -Overview".

To view, print and study the course document, please click on the following link(s):
Wind Turbine Technology - Overview (781 KB)
Course Quiz
Once you complete your course review, you will need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit.  The quiz will be based on this NYSERDA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: