Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Nebraska Geotechnical and Ethics 7 PDH Discount Package 2

PACKAGE NO: NE07G-02
PACKAGE PDH: 7
PACKAGE PRICE: $126
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Durability of Geosynthetics for Highway Applications
COURSE NO: C01-018
COURSE PROVIDER: Gilbert Gedeon, P.E.
Durability of Geosynthetics for Highway Applications
Course Highlights

This online engineering PDH course presents a study that addresses various aspects of geosynthetic durability to develop procedures that could be used to predict long-term strength losses of geosynthetics used in highway applications. These procedures are essential to designers for allowing tensile capacity for geosynthetics used primarily in mechanically stabilized earth (MSE) retaining walls, reinforced soil slopes, and foundation stabilization.

 

This study was initiated to allow voiced concerns that stress-cracking potential was not being considered in developing the allowable tension load capacity for design when using high-density polyethylene (HDPE) geogrids. Stress cracking is a potential mode of failure occurring in thermoplastic materials that are under a sustained stress significantly lower than the material’s room temperature yield strength, resulting in quasi-brittle fracture of the material. This is also known as slow crack growth and environmental stress cracking (ESC) when in contact with certain aqueous solutions.

 

This 1 PDH online course is applicable to all civil engineers, highway design professionals, transportation planners, material manufacturers and all personnel interested in learning about geosynthetics for highway applications.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Developing testing protocols necessary to quantify any strength reduction due to aging or stress mechanisms for geosynthetics
  • Developing testing protocols for confined stress-strain testing, which could more accurately characterize key engineering properties
Course Document
In this professional engineering CEU course, you need to review the Federal Highway Administration (FHWA) Report No. FHWA-RD-97-142, "Durability of Geosynthetics for Highway Applications”.
To view, print and study the course document, please click on the following link(s):
Durability of Geosynthetics for Highway Applications (208 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this FHWA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Tunnel Operations, Maintenance, Inspection, and Evaluation Manual: Evaluation
COURSE NO: C02-073
COURSE PROVIDER: Gilbert Gedeon, P.E.
Tunnel Operations, Maintenance, Inspection, and Evaluation Manual: Evaluation
Course Highlights

This engineering online PDH course will provide an overview on the evaluation of tunnel systems and the associated components. The components explored in this chapter include the typical personnel involved, supplemental inspection and testing methods, risk-based assessments, priority classification, and basic cost estimating. Information is also provided on load rating.  

 

Evaluations are normally performed after the inspection data is received. Sound engineering judgment is used to evaluate the consequences of tunnel system or component failure in terms of overall safety, service level, and costs. In some instances, supplementary inspections and testing may be needed where data is lacking. Risk assessment techniques should include strategies for deploying, operating, maintaining, upgrading, and disposing of tunnel system components in a cost-effective manner.

 

This 2 PDH online course is applicable to civil and structural engineers, as well as design and construction personnel involved with the evaluation process of tunnel systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the evaluation criteria and methods of tunnel systems
  • Identifying the typical personnel involved in tunnel evaluation procedures
  • Familiarization with different testing methods
  • Understanding risk-based assessments
  • Recognizing priority classification
  • Understanding the basics of cost estimating
Course Document
In this professional engineering CEU course, you need to review the document “Tunnel Operations, Maintenance, Inspection, and Evaluation (TOMIE) Manual – Chapter 5: Evaluation” by the Federal Highway Administration (FHWA) agency within the U.S. Department of Transportation.
To view, print and study the course document, please click on the following link(s):
TUNNEL OPERATIONS, MAINTENANCE, INSPECTION, AND EVALUATION MANUAL: EVALUATION (1.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on Chapter 5 of this FHWA Publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Vegetation Management at Levees, Floodwalls and Dams
COURSE NO: C03-037
Vegetation Management at Levees, Floodwalls and Dams
Course Highlights

This online engineering PDH course provides guidelines to assure that landscape planting and vegetation management provide aesthetic and environmental benefits without compromising the reliability of levees, floodwalls, embankment dams, and appurtenant structures.  The dimensions of the vegetation-free and root-free zones defined in this document provide the minimum acceptable buffer between vegetation and flood damage reduction structures.

 

This 3 PDH online course is intended for civil and hydraulic engineers involved with the design and maintenance of levees, floodwalls, embankment dams, and appurtenant structures.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about proper landscape planting: objectives and engineering requirements
  • Understanding the need for vegetation-free zone and vegetation-management zone
  • Understanding the areas of concern involving root impacts and root-free zone
  • Learning about treatment of levees, floodwalls, embankment dams, and other structures
  • Learning about feasibility analysis, planting berms, planters and irrigation systems
  • Learning about flood-fighting and structure maintenance
  • Understanding the goals of plant material selection and planting maintenance
  • Understanding the purpose of appropriate ground cover in the vegetation-free zone
  • Learning how to treat borrow sites and spoil sites
  • Learning about vegetation-related maintenance and repair
  • Deciding when removal of non-compliant vegetation is appropriate
Course Document

In this professional engineering CEU course, you need to review the U.S. Army Corps of Engineers Technical (USACE) Letter No. 1110-2-583, "Guidelines for landscape planting and vegetation management at levees, floodwalls, embankment dams, and appurtenant structures", dated April 10, 2009.

To view, print and study the course document, please click on the following link(s):
Vegetation Management at Levees, Floodwalls and Dams (6.44 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this USACE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Ethical Issue: Deciding if Something is a Gift or a Bribe
COURSE NO: LE1-007
Ethical Issue: Deciding if Something is a Gift or a Bribe
Course Highlights

This online engineering PDH course will establish, through the presentation of many examples, the principles of distinguishing between a gift and a bribe.

 

The federal government has formulated detailed rules covering gifts given to executive-branch employees in many situations. The rules are published in the Code of Federal Regulations (CFR) and are illustrated through many examples. Even though the examples are intended for government employees (many of whom are engineers), they also apply to private-sector engineers in similar situations. This course presents selected CFR examples that furnish guidance on the ethics of gift giving in situations that are especially relevant to engineers.

 

This 1 PDH online course is intended for engineers seeking guidance on distinguishing between ethical gift-giving and bribery.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with definitions of a bribe and a gift
  • Knowing the bribe status of a gift based on a personal relationship
  • Understanding the conditions under which gifts to spouses are acceptable
  • Knowing the need to avoid even the appearance of a gift being a bribe
  • Recognizing when gifts involving free attendance at meetings and conferences are acceptable
  • Understanding the importance of the cumulative effect of receiving even small gifts on a periodic basis
  • Learning the importance of gifts received when on assignment rather than outside of work
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Ethical Issue: Deciding if Something is a Gift or a Bribe,” by Mark P. Rossow.
To view, print and study the course document, please click on the following link(s):
ETHICAL ISSUE: DECIDING IF SOMETHING IS A GIFT OR A BRIBE (2.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document exclusive of the Appendix.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: