Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Pennsylvania Transportation and Ethics 24 PDH Discount Package 3

PACKAGE NO: PA24C-22
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Road Diet Informational Guide
COURSE NO: C04-061
COURSE PROVIDER: Gilbert Gedeon, P.E.
Road Diet Informational Guide
Course Highlights

This online engineering PDH course provides information on the design and post-implementation evaluation of Road Diets, and presents the decision-making process that helps practitioners determine whether Road Diets are a good fit for a certain corridor.

 

Four-lane undivided highways have a history of relatively high crash rates as traffic volumes increase and as the inside lane is shared by higher speed through traffic and left-turning vehicles. One option for addressing this safety concern is a “Road Diet.” A Road Diet involves converting an existing four-lane undivided roadway segment to a three-lane segment consisting of two through lanes and a center two-way left-turn lane (TWLTL). The reduction of lanes allows the roadway cross section to be reallocated for other uses such as bike lanes, pedestrian refuge islands, transit stops, or parking.

 

A Road Diet improves safety by including a protected left-turn lane for mid-block left-turning motorists, reducing crossing distance for pedestrians, and reducing travel speeds that decrease crash severity. Additionally, the Road Diet provides an opportunity to allocate excess roadway width to other purposes, including bicycle lanes, on-street parking, or transit stops.

 

This 4 PDH online course is applicable to transportation engineers who are interested in improving safety and reducing highway fatalities through the use of proven safety countermeasures including Road Diets.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the basics of Road Diets
  • Understanding the multidimensional benefits of Road Diets
  • Learning about the geometric and operational designs of Road Diets
  • Gaining a general overview on how to conduct a safety and an operational analysis to determine if the Road Diet is effective
  • Exploring various case studies on feasibility determination decision-making
Course Document
In this professional engineering CEU course, you need to review the course document titled, "Road Diet Informational Guide”, which is based on the FHWA document “Road Diet Informational Guide”, reference FHWA-SA-14-028.
To view, print and study the course document, please click on the following link(s):
ROAD DIET INFORMATIONAL GUIDE (1.5 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Ramp Planning and Design Considerations
COURSE NO: C04-005
COURSE PROVIDER: Gilbert Gedeon, P.E.
Ramp Planning and Design Considerations
Course Highlights

This online engineering PDH course provides guidance and recommended practices on planning and designing ramps with freeway facilities. The overriding objectives of effective planning and design are to minimize congestion, improve safety and enhance overall mobility.

 

This course also describes in greater depth the issues and concepts specific to ramp planning and design. This information will help practitioners develop a comprehensive understanding of project planning and design, and it will help ensure that projects are implemented successfully.

 

This 4 PDH online course is applicable to traffic engineers, transportation planners, managers, and other technical professionals who are involved in ramp planning and design in support of the overall ramp management strategy.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Knowing the environmental review process
  • Understanding the design considerations for ramp closures
  • Understanding the design considerations for special-use ramps
  • Understanding the design considerations for terminal treatments
  • Understanding the design considerations for ramp metering
  • Planning and design for ITS technology and electronic infrastructure
Course Document

In this professional engineering CEU course, you need to review Chapter 10, "Planning and Design Considerations" of the Federal Highway Administration Publication FHWA-HOP-06-001, "Ramp Management and Control Handbook".

To view, print and study the course document, please click on the following link(s):
Ramp Planning and Design Considerations (17 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Chapter 10 of this FHWA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Roundabout Planning, Design, and Operations Manual
COURSE NO: C07-019
COURSE PROVIDER: Gilbert Gedeon, P.E.
Roundabout Planning, Design, and Operations Manual
Course Highlights

This online engineering PDH course provides information on roundabout at the planning, design, construction, operations and maintenance levels. It also includes the procedures considered for selecting and assessing the appropriateness of a roundabout.

 

A modern roundabout is one of the three types of circular intersections. However, roundabouts have demonstrated substantial safety and operational performance over other forms of intersection control. This course focuses on two categories of roundabouts: single-lane and multilane roundabouts. It is intended to ensure consistency across the State in the implementation of roundabouts at new installations and to provide safe and efficient traffic operations in the case of retrofit/redesign or reconstruction of existing intersections.

 

This 7 PDH online course is applicable to transportation engineers, road designers, planners, contractors and professionals who are interested in the design, operation, construction and maintenance of roundabouts.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the roundabout planning at signalized and un-signalized at-grade intersections
  • Knowing the effect public participation and education on the safety and performance of roundabouts
  • Understanding the methods and parameters used in the geometric design of roundabouts, positioning of signs, landscaping, poles, and other roadside furniture
  • Learning the considerations taken for pedestrian and cyclists while designing a roundabout
  • Knowing the traffic control devices such as traffic signing and pavement markings
  • Understanding the general principals and recommendations for roundabout lightening and landscaping
  • Learning about the construction stages and the traffic control in the work zone
  • Familiarizing with the maintenance special provisions of watering and drainage systems in the central islands of roundabouts
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Roundabout Planning, Design, and Operations Manual”, which is based on the Alabama Department of Transportation document “Roundabout Planning, Design, and Operations Manual", Published on December 2015
To view, print and study the course document, please click on the following link(s):
ROUNDABOUT PLANNING, DESIGN, AND OPERATIONS MANUAL (16.8 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty five (35) questions to earn 7 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Improved Urban Freight Mobility and Delivery
COURSE NO: C07-020
COURSE PROVIDER: Gilbert Gedeon, P.E.
Improved Urban Freight Mobility and Delivery
Course Highlights

This online engineering PDH course provides an overview of the main operations, logistics, and technology strategies for improving urban freight mobility and delivery.

 

The course covers the challenges and opportunities associated with urban freight transport, as well as various strategies and technologies that can be used to improve freight mobility in urban areas or to minimize its impacts on others. Operations, logistics, and technology (OLT) strategies represent a set of practices that can be applied to improve the movement of goods and the quality of life of urban residents.

 

The course will help in understanding potential applications of OLT strategies in order to improve urban freight management and mobility through sharing noteworthy practices that have been implemented successfully.

 

This 7 PDH online course is applicable to transportation planners, traffic engineers, agency personnel as well as design and construction personnel involved in the improvement of urban freight mobility and delivery.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with operations strategies and noteworthy practices
  • Understanding logistics strategies and noteworthy practices such as off-hour delivery, reservation systems for pick-up and delivery locations, modal shifts, freight consolidation
  • Learning about technology strategies and noteworthy practices
  • Learning about planning and funding operations, logistics, and technology strategies
  • Understanding federal funding opportunities for freight
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Improved Urban Freight Mobility and Delivery”, which is disseminated under the sponsorship of the U.S. Department of Transportation: Federal highway administration, dated May 2018. 
To view, print and study the course document, please click on the following link(s):
IMPROVED URBAN FREIGHT MOBILITY AND DELIVERY (2.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty-five (35) questions to earn 7 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: General Principles of Engineering Ethics
COURSE NO: LE2-016
COURSE PROVIDER: Gilbert Gedeon, P.E.
General Principles of Engineering Ethics
Course Highlights

This online engineering PDH course presents the principles of engineering ethics that every engineer is expected to live by when practicing their profession.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

This course describes the fundamental legal concepts with which very engineer should be familiar. It also presents unique disciplinary case studies selected from across the nation, as well as hypothetical ethical challenges that demonstrate how difficult it can be to apply the code of ethics for engineers.

 

This 2 PDH online course is applicable to all professional engineers who are either required to fulfill 2 PDH in engineering ethics or are interested in broadening their understanding of what it means to practice and uphold the honor and integrity of their engineering profession while holding the utmost safety, health, and welfare of the public.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the common definition of ethics regarding engineering
  • Learning about the important principles of the engineer’s professional responsibility
  • Learning the do’s and don’ts through several ethical and disciplinary cases
  • Understanding what it means to practise and uphold the honor and integrity of the engineering profession
Course Document
In this professional engineering CEU course, you need to review the course document titled, “General Principles of Engineering Ethics”, which is prepared by Gilbert Gedeon, P.E.
To view, print and study the course document, please click on the following link(s):
GENERAL PRINCIPLES OF ENGINEERING ETHICS (874 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: