Pennsylvania Industrial and Ethics 24 PDH Discount Package 2
Handling of Radioactive Materials (N02-002)
Nuclear Explosive Safety (N02-006)
Radiation Detectors for Industrial Facility Systems (D06-001)
Nuclear Plant Material Selection and Application (T05-001)
Design of Uranium Mines and Mills: Ventilation Systems (N02-008)
General Principles of Engineering Ethics (LE2-016)

This online engineering PDH course is a graded summary of important aspects of the Light Water Reactor (LWR) core and plant systems.
There are two types of LWR technologies, Pressurized Water Reactor (PWR) and Boiling Water Reactors (BWR). This course discusses fundamental design traits of each providing contrasts between performance and safety features. Its intent is to provide a clear understanding of nuclear terminology associated with LWR technology, including fundamentals, systems, safety, and regulations.
This 5 PDH online course is applicable to industrial and nuclear engineers as well as other technical professionals who are interested in learning more about Light Water Reactor systems.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Familiarizing with the basic concepts of radioactive materials and radioactivity
- Identifying the potential effect of various types of radioactive particles and waves on the human body
- Learning about the reactions in fissile material and the resulting decay products as the various forms of radioactivity
- Understanding the basic core physics principles core physics, reactor control and heat transfer
- Learning about the Pressurized Water Reactors (PWR) and the Boiling Water Reactors (BWR)
- Knowing the material degradation issues such as water chemistry issues and fuel and structural material issues
- Identifying safety issues such as initiating events, anticipated frequency of occurrence and barriers of defense
- Knowing the reactor instrumentation and control: reactor data acquisition system and the reactor protection and engineered safety feature actuation system
In this professional engineering CEU course, you need to review the course document titled, “Nuclear Energy Principles and Reactor Fundamentals”, which is based on U.S. Department of Energy National Laboratory operated by Battelle Energy Alliance “Reactor Fundamentals
Handbook”, publication INL/EXT-19-53301 Revision 0, dated April 2019.Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH course provides guidance on handling of radioactive material including identification, storage and control as well as release and transportation of this material. It also discusses the management and control of solid radioactive waste, radioactive liquids, and airborne radioactivity. Finally, it describes the procedures for monitoring and decontamination of materials, tools, and equipment contaminated with radioactive material.
This 2 PDH online course is applicable to engineers, design and construction personnel, and other technical professionals who are interested in gaining a better understanding on the handling of radioactive materials.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Identification, storage and control of radioactive material
- Release and transportation of radioactive material
- Management of solid radioactive waste
- Control of radioactive liquids and airborne radioactivity
- Control and monitoring of personal protective equipment and clothing
- Decontamination of materials, tools and equipment
In this professional engineering CEU course, you need to review Chapter 4 of the "DOE Standard Radiological Control" manual, published by the Department of Energy, Publication Number DOE-STD-1098-2008.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH course provides supplemental requirements to ensure adequate Nuclear Explosive Safety for Nuclear Explosive Operations (NEOs) conducted by the DOE, NNSA, and DOE/NNSA contractors. The contents of this course specify mandatory procedures and management processes.
Chapter I of this course discusses two-person concept requirements. Chapter II discusses electrical equipment requirements. Chapter III establishes nuclear explosive-like assembly requirements. Chapter IV establishes marking requirements for nuclear explosives and nuclear explosive-like assemblies.
This 2 PDH online course is intended for nuclear and industrial engineers, contractors, and personnel involved in performing, managing, overseeing, or directly supporting nuclear explosive operations (NEOs) or associated activities.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Familiarizing with the requirements of the two-person concept
- Understanding the requirements for electrical equipment
- Familiarizing with the requirements for nuclear explosive-like assembly
- Establishing marking requirements for nuclear explosives and nuclear explosive-like assemblies
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH course provides a basic understanding of instrumentation and control necessary for safe operation and maintenance of energy facilities and their support systems. In particular, this course describes the principles of radiation detection, detector operation, circuit operation, and specific radiation detector applications.
This 6 PDH online course is applicable to industrial and nuclear engineers, construction and design personnel, technical staff and facility operators who are interested in gaining a better understanding of radiation detectors.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Radiation detection terminology
- Radiation types
- Circuitry and circuit elements
- Types of detectors
- Types of counters
- Types of ionization chambers
- Types of nuclear instrumentation
In this professional engineering CEU course, you need to review Module 6, "Radiation Detectors" of the Department of Energy Publication DOE-HDBK-1013/2-92, "Instrumentation and Control".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH course addresses commonly used nuclear plant materials and the characteristics desired when selecting material for such use. It also discusses some of the considerations used in the selection process including material properties, fuel, fuel cladding, reflector material, control materials, and shielding materials.
During the selection and application of materials used for construction of a nuclear facility, many different material properties and factors must be considered depending upon the requirements for each specific application. Generally, these consist of both non-fuel reactor materials, used for structural and component construction, and fuel materials.
This 5 PDH online course is applicable to mechanical and plant engineers, construction and design personnel, technical staff and facility operators who are interested in gaining a better understanding of plant material selection and use.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Properties considered when selecting plant materials
- Fuel materials
- Cladding and reflections
- Control materials
- Shielding materials
- Nuclear reactor core problems
- Plant material problems
- Atomic displacement due to irradiation
- Thermal and displacement spikes due to irradiation
- Effect due to neutron capture
- Radiation effects in organic compounds
- Reactor use of aluminum
In this professional engineering CEU course, you need to review Module 5, "Plant Materials" of the Department of Energy Publication DOE-HDBK-1017/1-93, "Material Science".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH course provides information on the operational and maintenance obligations for ventilation systems of a uranium mine or mill.
Guidance found in this course informs the applicant, and elaborates further on requirements or provides direction to licensees and applicants on how to meet licence requirements. It also provides more information about how CNSC staff evaluate specific problems or data during their review of licence applications. This course also addresses the requirements for submitting ventilation-related information when applying for a CNSC licence to prepare a site for and construct, operate or decommission a uranium mine or mill.
This 2 PDH online course is applicable to industrial engineers and professionals who are interested in learning more the licensing of uranium mines or mills.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Familiarizing with the relevant legislation for the licensing of uranium mines or mills
- Understanding the environmental assessment process and the licensing process
- Identify the CNSC point of contact and method of application submission
- Learning the requirements of the licence to prepare a site for and construct, licence to operate, licence to decommission, etc.
- Knowing the operational and maintenance-related requirements
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH course presents the principles of engineering ethics that every engineer is expected to live by when practicing their profession.
Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).
This course describes the fundamental legal concepts with which very engineer should be familiar. It also presents unique disciplinary case studies selected from across the nation, as well as hypothetical ethical challenges that demonstrate how difficult it can be to apply the code of ethics for engineers.
This 2 PDH online course is applicable to all professional engineers who are either required to fulfill 2 PDH in engineering ethics or are interested in broadening their understanding of what it means to practice and uphold the honor and integrity of their engineering profession while holding the utmost safety, health, and welfare of the public.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Understanding the common definition of ethics regarding engineering
- Learning about the important principles of the engineer’s professional responsibility
- Learning the do’s and don’ts through several ethical and disciplinary cases
- Understanding what it means to practise and uphold the honor and integrity of the engineering profession
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.