Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Delaware Energy Efficiency and Ethics 24 PDH Discount Package 2

PACKAGE NO: DE24R-05
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Solar Energy Introduction
COURSE NO: R03-016
Solar Energy Introduction
Course Highlights

This online engineering PDH course provides an overview of solar electromagnetic radiation, and presents the fundamental solar parameters and the different methods for calculating them.

 

Solar energy travels from the sun to the earth in the form of electromagnetic radiation. In this course, properties of electromagnetic radiation will be discussed, and basic calculations for electromagnetic radiation will be presented. Moreover, several solar position parameters, as well as the major methods by which solar radiation is converted into other useable forms of energy will be discussed.

 

Finally, information will be presented on the use of websites to obtain values for yearly average solar insolation, monthly average insolation, or daily insolation at a specified location in the United States, or anywhere around the world.

 

This 3 PDH online course is applicable to mechanical, electrical, chemical and energy engineers and architects who interested in learning more about the renewable energy field.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the different types of electromagnetic radiation
  • Knowing how to calculate the wavelength and frequency for a specified electromagnetic radiation
  • Knowing the meaning of absorbance, reflectance and transmittance as applied to a surface receiving electromagnetic radiation
  • Learning how to obtain and calculate values for solar declination, solar hour angle, solar altitude angle, sunrise and sunset angle
  • Understanding the major methods by which solar radiation is converted into other useable forms of energy
  • Knowing how to use websites to obtain values of relevant solar parameters at a specified location in the United States or anywhere around the world
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Solar Energy Introduction”, which is prepared by Harlan Bengtson, Ph.D., P.E.
To view, print and study the course document, please click on the following link(s):
SOLAR ENERGY INTRODUCTION (3.0 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Water Efficiency Management Guide for Bathroom Suites
COURSE NO: M01-019
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Water Efficiency Management Guide for Bathroom Suites
Course Highlights

This online engineering PDH course provides basic information on how to improve water management, reduce property water use, and subsequently improve EPA Water Score.

 

Bathrooms offer a clear opportunity for properties to save significant amounts of water. Use of toilets, faucets, showerheads, and other sanitary fixtures in the bathroom suite typically represent a significant percentage of water use in properties. Replacing bathroom fixtures with water-efficient products, and WaterSense labeled products when applicable, can provide the most significant opportunity for water and energy savings, particularly in older buildings with inefficient fixtures.

 

This 1 PDH online course is applicable to mechanical and sustainability engineers, as well as other technical personnel who are interested in improving water management and minimizing wastewater.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Knowing the background and importance of water management for bathrooms
  • Familiarizing with bathroom maintenance best management practices
  • Understanding water savings calculations for toilets, bathroom sink faucets, bath and shower diverters, and showerheads
  • Knowing the replacement options when installing new toilet fixtures or replacing old, inefficient products
Course Document
In this professional engineering CEU course, you need to review the course document titled, "Water Efficiency Management Guide: Bathroom Suite”, which is based on the EPA document “Water Efficiency Management Guide Bathroom Suite”, reference EPA 832-F-17-016d, dated November 2017.
To view, print and study the course document, please click on the following link(s):
WATER EFFICIENCY MANAGEMENT GUIDE FOR BATHROOM SUITES (825 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Heating and Cooling System Upgrades
COURSE NO: M03-022
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Heating and Cooling System Upgrades
Course Highlights

This online engineering PDH course identifies the opportunities for improving the performance of the heating and cooling system based on the type of system that is in place.

 

Heating and cooling systems are the largest single consumers of energy in buildings. These systems condition the air within a building so that occupants are comfortable. Heating and cooling systems consist mainly of chillers, boilers, cooling towers, and pumps. There are central heating and cooling systems, and unitary systems that combine heating and cooling. Opportunities exist for improvement to both central and unitary systems.

 

This 3 PDH online course is applicable to engineers, contractors, designers and other technical professionals who are involved in the retrofit of existing heating and cooling systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the best opportunities available for upgrading central cooling systems including chillers, cooling towers, water side economizers and pumps
  • Understanding the best opportunities available for upgrading central heating systems including boilers and furnaces
  • Understanding the best opportunities available for unitary systems including packaged or rooftop units, split system packaged units, air source heat pumps and water loop heat pump systems
  • Learning about new strategies aimed at saving energy such as geothermal heat pumps, district cooling and heating, radiant heating and cooling, cool storage, high temperature difference distribution, evaporative cooling, and non-electric cooling
Course Document

In this professional engineering CEU course, you need to review "Heating and Cooling System Upgrades" of the Energy Star Building Manual. (Energy Star is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy).

To view, print and study the course document, please click on the following link(s):
Heating and Cooling System Upgrades (2.2 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this EPA/DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Continuous Energy Improvement in Motor Driven Systems
COURSE NO: E08-007
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Continuous Energy Improvement in Motor Driven Systems
Course Highlights

This online engineering PDH course presents the fundamental information and necessary guidance required to assist the Manufacturing and Process industries in optimizing their electric motor driven systems which leads to substantial energy / cost savings.

 

Electric motors are among the least well-managed industrial equipment, even though motor-driven equipment accounts for approximately 70% of the electrical energy consumed by process industries and approximately 90% for electrical intensive industries. Motors that are not properly managed can result in billions of dollars in wasted energy and operating costs to an industry.

 

A detailed analysis of the U.S. motor systems inventory indicates that this energy use could be reduced by 11% to 18% if plant managers implement all cost-effective applications of mature and proven energy efficiency technologies and practices. It is worth noting that the suggested improvements are not necessarily limited to the U.S., but can be implemented in any industry around the world that utilizes motor driven systems.

 

This 8 PDH online course is applicable to electrical, mechanical, and industrial engineers as well as other technical personnel interested in learning more about improving the operation of motor driven systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with motor energy management and best practices
  • Understanding the different types of utility charges
  • Learning about the steps involved in conducting a motor survey
  • Familiarizing with motor specification and selection considerations
  • Estimating motor load and efficiency
  • Analyzing motor efficiency opportunities
  • Conducting plans for improving motor efficiency
  • Familiarizing with the opportunities to improve system efficiencies
  • Understanding the importance and practicality of power factor correction
Course Document
In this professional engineering CEU course, you need to review the document “Continuous Energy Improvement in Motor Driven Systems” prepared by the U.S. Department of Energy, publication number DOE/GO-102014-4357.
To view, print and study the course document, please click on the following link(s):
CONTINUOUS ENERGY IMPROVEMENT IN MOTOR DRIVEN SYSTEMS (3.8 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty (40) questions to earn 8 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Wireless Occupancy Sensors for Lighting Controls
COURSE NO: E01-012
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Wireless Occupancy Sensors for Lighting Controls
Course Highlights

This online engineering PDH course provides basic information on wireless occupancy for lighting controls.

 

Lighting use constitutes about 20% of the total energy consumption in commercial buildings. Adding lighting controls is a simple retrofit option than can save on energy costs while helping to meet agency and federal energy savings mandates. Some energy codes and federal standards require the use of lighting controls.

 

Studies have shown that adding lighting controls can reduce lighting energy use 10% to 90% or more depending on the use of the space in which the sensors are installed. One study conducted on a university campus found that installing wired occupancy sensors to control lighting in more than 200 rooms in 10 buildings provided an annual cost savings of about $14,000 with a simple payback of 4.2 years.

 

This 1 PDH online course is applicable to electrical engineers and others interested in gaining knowledge about wireless occupancy for lighting controls for a better sustainable design.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the different types of occupancy sensors and their characteristics including microphonic, ultrasonic, bluetooth, video image and dual technology
  • Gaining a general overview of the codes and standards of lighting controls
  • Learning about the types of light source to use for occupancy sensors
  • Understanding how wireless sensors are powered and the best practices in using wireless sensors
  • Learning about the cost considerations for wire and wireless sensors
Course Document
In this professional engineering CEU course, you need to review the course document titled, " Wireless Occupancy Sensors for Lighting Controls”, which is based on the US department of Energy document “Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers”, dated December 2019.
To view, print and study the course document, please click on the following link(s):
WIRELESS OCCUPANCY SENSORS FOR LIGHTING CONTROLS (1.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Improving Process Heating Systems Performance
COURSE NO: M05-026
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Improving Process Heating Systems Performance
Course Highlights

This online engineering PDH course describes basic process heating applications and equipment, and outlines opportunities for energy and performance improvements. It also discusses the merits of using a systems approach in identifying and implementing these improvement opportunities for Fuel-Based and Electric-Based heating systems. Furthermore, it provides recommendations to financially justify process heating improvement projects (System Economics).

 

Process heating is essential in the manufacture of most consumer and industrial products, including those made out of metal, plastic, rubber, carbon fiber, concrete, glass, and ceramics. Process heating systems are broken into three basic categories: Fuel-Based Process Heating, Electric-Based Process Heating, and Steam-Based Process Heating all of which are discussed in details.

 

This 5 PDH online course is applicable to mechanical, industrial and process engineers, designers, manufacturers and all personnel involved in the planning, design and installation of process heating systems.

 

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the basics behind process heating operations
  • Familiarizing with the common types of process heating systems and equipment
  • Recognizing efficiency opportunities for fuel-based and electric-based heating systems
  • Learning how to financially justify process heating improvement projects
Course Document
In this professional engineering CEU course, you need to review the Department of Energy (DOE) Publication "Improving Process Heating System Performance" Sourcebook Third Edition.
To view, print and study the course document, please click on the following link(s):
IMPROVING PROCESS HEATING SYSTEMS PERFORMANCE (2.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty-five (25) questions to earn 5 PDH credits. The quiz will be based on Sections 1 to 5 and Appendix A of this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics Case Study: The Challenger Disaster
COURSE NO: LE3-001
Engineering Ethics Case Study: The Challenger Disaster
Course Highlights

This online engieering PDH course provides instruction in engineering ethics through a case study of the Space Shuttle Challenger disaster. The minimum technical details needed to understand the physical cause of the Shuttle failure are presented. The disaster itself is chronicled through NASA photographs. Next the decision-making process, especially the discussions occurring during the teleconference held on the evening before the launch, is described. Direct quotations from engineers interviewed after the disaster are used to illustrate the ambiguities of the data and the pressures that the decision-makers faced in the months and hours preceding the launch. The course culminates in an extended treatment of six ethical issues raised by Challenger.

 

This 3 PDH online course is intended for all engineers who are interested in gaining a better understanding about the ethical issues that lead to the Challenger disaster and how they could have been avoided.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Common errors to avoid in studying the history of an engineering failure: the retrospective fallacy and the myth of perfect engineering practice
  • Shuttle hardware involved in the disaster
  • Decisions made in the period preceding the launch
  • Ethical issue: NASA giving first priority to public safety over other concerns
  • Ethical issue: the contractor giving first priority to public safety over other concerns
  • Ethical issue: whistle blowing
  • Ethical issue: informed consent
  • Ethical issue: ownership of company records
  • Ethical issue: how the public perceives that an engineering decision involves an ethical violation
Course Document

In this professional engineering CEU course, you need to review the course document titled, "Engineering Ethics Case Study: The Challenger Disaster".

To view, print and study the course document, please click on the following link(s):
Engineering Ethics Case Study: The Challenger Disaster (2.5 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: