Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Delaware Construction Safety and Ethics 24 PDH Discount Package 1

PACKAGE NO: DE24Y-05
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Safety Evaluation of Centerline and Shoulder Rumble Strips
COURSE NO: C04-048
COURSE PROVIDER: Gilbert Gedeon, P.E.
Safety Evaluation of Centerline and Shoulder Rumble Strips
Course Highlights

This online engineering PDH course describes the strategy involving the application of shoulder rumble strips (SRS) and centerline rumble strips (CLRS) in combination. This strategy is intended to reduce the frequency of crashes by alerting drivers that they are about to leave the travelled lane. While research has been published on the safety effectiveness of SRS or CLRS used in isolation, the effectiveness of the combined treatment has not been shown.

 

Geometric, traffic, and crash data were obtained at treated two-lane rural road locations in Kentucky, Missouri and Pennsylvania. To account for potential selection bias and regression-to-the-mean, an Empirical Bayes (EB) before-after analysis was conducted using reference groups of untreated two-lane rural roads with similar characteristics to the treated sites. A slightly different approach was required for the analysis of the treatment sites in Missouri, which is installing rumble strips on two-lane rural roads whenever a resurfacing project is undertaken. As a result, a suitable reference group with no rumble strips for this road type presently or in the near future did not exist. The analysis also controls for changes in traffic volumes over time and time trends in crash counts unrelated to the treatment.

 

This 4 PDH online course is intended for traffic engineers, design professionals and construction personnel who are involved in the design and application of centerline and shoulder rumble strips.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the background information about the strategy and the study
  • Familiarizing with previous research of SRS and CLRS
  • Learning about the Empirical Bayes (EB) methodology used for the evaluation
  • Understanding the data collection of the three States in study
  • Familiarizing with the SPFs developed for each State
  • Familiarizing with the before-after evaluation results of crashes
Course Document
In this professional engineering CEU course, you need to review the document “Safety Evaluation of Centerline and Shoulder Rumble Strips” prepared by the U.S. Department of Transportation, Federal Highway Administration FHWA-HRT-15-048, June 2015.
To view, print and study the course document, please click on the following link(s):
SAFETY EVALUATION OF CENTERLINE AND SHOULDER RUMBLE STRIPS (1.7 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Safety and Health Programs in Construction
COURSE NO: C03-062
COURSE PROVIDER: Gilbert Gedeon, P.E.
Safety and Health Programs in Construction
Course Highlights

This online engineering PDH course provides responsible employers, workers, and worker representatives with a sound, flexible framework for addressing safety and health issues on diverse construction job sites.

 

This course follows a proactive approach to managing occupational safety and health rather than a traditional approach where actions are taken only after a worker is injured or becomes sick. Finding and fixing hazards before they cause injury or illness is a far more effective approach. Doing so avoids the direct and indirect costs of worker injuries and illnesses and promotes a positive work environment.

 

Employers will find that implementing the recommended practices highlighted in this course will bring other benefits as well such as improvements in production/quality, better employee morale, improved employee recruiting and retention, and a more favorable image and reputation among customers, suppliers, and the community.

 

This 3 PDH online course is applicable to health and safety engineers, construction and project managers, site engineers, and anyone who is interested in improving the standard and level of health and safety on construction sites.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the seven core elements of the recommended practices for safety and health programs in construction
  • Learning about the importance of effective management leadership
  • Understanding how to promote worker participation
  • Familiarizing with hazard identification and assessment
  • Learning about hazard prevention and control
  • Familiarizing with the education and training mindset required on site
  • Gaining insight on evaluation and improvement programs
  • Understanding the importance of communication and coordination for employers on multiemployer worksites
Course Document
In this professional engineering CEU course, you need to review the document “Safety and Health Programs in Construction” which is based on the OSHA publication titled "Recommended Practices for Safety & Health Programs in Construction", dated October 2016.
To view, print and study the course document, please click on the following link(s):
SAFETY AND HEALTH PROGRAMS IN CONSTRUCTION (1.9 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Stairways and Ladders
COURSE NO: C01-012
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Stairways and Ladders
Course Highlights

This online engineering PDH course provides guidance on OSHA construction safety and health standards that apply to all stairways and ladders used in construction, alteration, repair, painting, decorating and demolition of worksites.

 

Stairways and ladders are major sources of injuries and fatalities among construction workers, and many of the injuries are serious enough to require time off the job. OSHA recognizes that carelessness/misuse in using stairways and ladders presents serious danger to all workers involved. Therefore, OSHA developed the "Stairways and Ladders" guidance document to minimize hazards and protect employees from construction related accidents.

 

This 1 PDH online course is applicable to all engineers, employers, building owners, facility managers, and all personnel working on construction projects.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the general requirements for stairways and ladders
  • Learning about the specific rules and safety precautions for all types of ladders
  • Learning about the specific rules and safety precautions that govern stairways
Course Document

In this professional engineering CEU course, you need to review OSHA 3124-12R, "Stairways and Ladders". 

To view, print and study the course document, please click on the following link(s):
Stairways and Ladders (540 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this OSHA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Underground Construction Safety
COURSE NO: C03-014
COURSE PROVIDER: Gilbert Gedeon, P.E.
Underground Construction Safety
Course Highlights

This online engineering PDH course summarizes OSHA's regulations related to underground construction.

 

The construction of underground tunnels, shafts, chambers, and passageways are essential yet dangerous activities. Working under reduced light conditions, difficult or limited access and egress, with the potential for exposure to air contaminants and the hazards of fire and explosion, underground construction workers face many dangers. OSHA recognizes that working in underground environments presents serious hazards to all workers involved. Therefore OSHA developed the underground construction standard to protect the safety and health of underground construction workers.

 

This 3 PDH online course is applicable to employers/business owners, engineers, managers, construction workers and all other personnel involved with underground construction projects.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Knowing the construction operations covered by the OSHA regulations
  • Familiarizing with the training, notification and communications requirements
  • Understanding the site access and ground support procedures
  • Understanding the ventilation, illumination and air monitoring requirements
  • Learning the special conditions for underground drilling and blasting
  • Learning the special requirements for using underground cranes and hoists
  • Understanding the hazards that require special precautions and emergency procedures
Course Document

In this professional engineering CEU course, you need to review OSHA, 3115-06R, "Underground Construction". 

To view, print and study the course document, please click on the following link(s):
Underground Construction Safety (625 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this OSHA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Fundamentals of Fire Protection
COURSE NO: M06-023
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Fundamentals of Fire Protection
Course Highlights

This online engineering PDH course introduces basic fire protection issues related to the safeguarding of life and property against fire loss. It describes the fundamental principles of fire science and of the dynamics of fire growth in buildings and demonstrates how a sound understanding of these is necessary before viable fire protection measures can be implemented. In addition this course develops an engineering appreciation of standard practices and regulations related to the prevention, detection and suppression of fires.

 

This 6 PDH online course is applicable to mechanical engineers, designers, architects, contractors, building professionals, and all other personnel involved with fire protection projects.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the fundamentals of fire science
  • Understanding the dynamics of fire
  • Learning the principles of fire protection
  • Knowing  the basics of fire detection
  • Learning the principles of fire suppression
Course Document

In this professional engineering CEU course, you need to review the NIOSH Instructional Module, "Fire Protection".

To view, print and study the course document, please click on the following link(s):
Fundamentals of Fire Protection (3.8 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty (30) questions to earn 6 PDH credits. The quiz will be based on this NIOSH publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Controlling Electrical Hazards
COURSE NO: E02-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Controlling Electrical Hazards
Course Highlights

This online engineering PDH course provides OSHA guidance on controlling electrical hazards for protecting workers from exposure to electrical hazards.

 

Electricity has been long recognized as a serious workplace hazed, exposing employees to electric shock, electrocution, burns, fires and explosions. According to the Bureau of Labor Statistics, many workers have died from electrocutions at work, accounting for as many as 5% of all on-the-job-fatalities in a given year. What makes these statistics more tragic is that most of these fatalities could have been easily avoided.

 

OSHA recognizes that electrical hazards present serious hazards to all workers involved. Therefore, OSHA developed several standards for Controlling Electrical Hazards to protect employees working in the construction industry from exposure to electrical hazards.

 

This 2 PDH online course is applicable to employers, building owners, engineers, electricians, managers, construction workers and any other personnel working on construction projects that involve exposure to electrical hazards.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • What affects the flow of electricity
  • What is the cause of shocks and their effect on the body
  • How to react if someone "freezes" to a live electrical contact
  • How to protect yourself against electrical hazards
  • What protection does insulation provide
  • What are the different types of insulation
  • What are circuit protection devices
  • What work practices help protect you from electrical hazards
  • What role do tools play
  • Employee training
Course Document

In this professional engineering CEU course, you need to review OSHA 3075, "Controlling Electrical Hazards". 

To view, print and study the course document, please click on the following link(s):
Controlling Electrical Hazards (350 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on this OSHA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Personal Protective Equipment
COURSE NO: T03-003
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Personal Protective Equipment
Course Highlights

This online engineering PDH course addesses Personal Protective Equipment (PPE) types, selection and training, as well as conducting a hazard assessment of the workplace.

 

Hazards exist in every workplace in many different scenarios: sharp edges, falling objects, flying sparks, chemicals, noise and a myriad of other potentially dangerous situations. Controlling a hazard at its source is the best way to protect employees. Depending on the hazard or workplace conditions, OSHA recommends the use of engineering or work practice controls to manage or eliminate hazards to the greatest extent possible. Therefore, OSHA developed the Personal Protection Equipment Standard to protect employees from workplace hazards that can cause injury.

 

This 3 PDH online course is applicable to all engineers, employers, building owners, facility managers, and all personnel working on construction projects.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the types of personal protective equipment (PPE)
  • Knowing the basics of conducting a "hazard assessment" of the workplace
  • Selecting the appropriate PPE for a variety of circumstances
  • Understanding what kind of training is needed for the proper use and care of PPE

 

Course Document

In this professional engineering CEU course, you need to review OSHA 3151-12R, "Personal Protective Equipment". 

To view, print and study the course document, please click on the following link(s):
Personal Protective Equipment (1.0 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on this OSHA publication

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for Delaware Professional Engineers
COURSE NO: DE2-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for Delaware Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to Delaware Professional Engineers. It is also offered as a 2 PDH recorded video presentation and as a 2 PDH live interactive webinar.
Course Highlights

This online engineering PDH course presents the laws of professional responsibility governing the practice of engineering in the State of Delaware, as well as the Delaware engineering code of ethics as follows:

 

  • Delaware Professional Engineers' Act: Title 24, Chapter 28
  • Delaware Engineering Code of Ethics

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of Delaware and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal.

 

Every licensee is required to obtain the equivalent of 12 PDHs per year (or 24 PDHs obtained anytime during the renewal period). Of the 24 PDHs earned during the biennial renewal period: no less than 2 PDH and no more than 6 PDH shall be related to professional ethics, and no more than 9 PDH shall be related to business or project management. The balance shall be related to the licensee’s area of technical practice.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the statutory laws regulating the practice of engineering in the State of Delaware and their application to professional engineers
  • Understanding the Delaware Engineering Code of Ethics promulgated by the Council of the DAPE to safeguard life, health and property and promote public welfare
  • Learning about the engineering rules of professional responsibility and ethical conduct as well as understanding the basic obligations of the engineer
  • Understanding the Delaware disciplinary process and the range of violations and corresponding penalties imposed by DAPE
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for Delaware Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
ENGINEERING ETHICS FOR DELAWARE PROFESSIONAL ENGINEERS (1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: