Interactive & Video Discount Package - Georgia Construction Safety 15 PDH
Protecting Construction Workers in Confined Spaces (Y01-303)
Fall Protection in Construction (Y01-304)
Electrical Safety (Y02-301)
Ergonomic Guidelines for Manual Material Handling (Y01-301)
Introduction to Radiation (Y01-305)

This online engineering PDH interactive presentation provides responsible employers, workers, and worker representatives with a sound, flexible framework for addressing safety and health issues on diverse construction job sites.
Establishing a safety and health program at your job site is one of the most effective ways of protecting your most valuable asset: your workers. Losing workers to injury or illness, even for a short time, can cause significant disruption and cost—to you as well as the workers and their families. Safety and health programs foster a proactive approach to “finding and fixing” job site hazards before they can cause injury or illness. Rather than reacting to an incident, management and workers collaborate to identify and solve issues before they occur. This collaboration builds trust, enhances communication, and often leads to other business improvements.
This 1 PDH online interactive presentation is applicable to health and safety engineers, construction and project managers, site engineers, and anyone who is interested in improving the standard and level of health and safety on construction sites.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Understanding the seven core elements of the recommended practices for safety and health programs in construction
- Learning about the importance of effective management leadership
- Understanding how to promote worker participation
- Familiarizing with hazard identification and assessment
- Learning about hazard prevention and control
- Familiarizing with the education and training mindset required on site
- Gaining insight on evaluation and improvement programs
- Understanding the importance of communication and coordination for employers on multiemployer worksites
Once you finish watching the PDH interactive presentation, you will be redirected to your account to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this interactive presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation intends to help small businesses comply with the Confined Spaces standard. It addresses the most common compliance issues that employers will face and provides sufficient detail to serve as a useful compliance guide.
A confined space is a space whose configuration and/or contents may present special dangers not found in normal work areas. Confined spaces may be poorly ventilated and, as a result, contain insufficient oxygen or hazardous levels of toxic gases. Working in a tight space can prevent a worker from keeping a safe distance from mechanical and electrical hazards in the space.
This presentation begins by a defining confined and permit spaces. It helps employers learn about their responsibilities regarding the permit space program and its alternate procedures. It also defines the scope of worker training by defining the responsibilities of entrants, attendants and entry supervisors. The presentation culminates with an exploration of different rescue and emergency services.
This 1 PDH online course is applicable to engineers, architects, managers and contractors whose duties involve work in confined spaces and are interested in learning about the proper approach to safety while working in compliance with the Confined Spaces standard.
This continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Familiarizing with confined and permit spaces
- Gaining a general overview of the confined spaces standard’s requirements
- Learning about employer responsibilities and worker training
- Understanding the content of the permit space program
- Learning about the alternate procedures for certain permit spaces
- Understanding the responsibilities of entrants, attendants and entry supervisors
- Exploring different rescue and emergency services
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides an overview of the basic OSHA guidelines for fall protection for protecting workers against potential fall hazards.
In the construction industry in the U.S., falls are the leading cause of worker fatalities. Each year, on average, between 150 and 200 workers are killed and more than 100,000 are injured as a result of falls at construction sites. OSHA recognizes that accidents involving falls are generally complex events frequently involving a variety of factors. Consequently, the standard for fall protection deals with both the human and equipment-related issues in protecting workers from fall hazards.
This 1 PDH online course is intended for employers/business owners, engineers, managers and construction workers interested in better understanding the Fall Protection in Construction requirements and the reasons behind them.
This continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Identifying potential fall hazards
- Selecting fall protection systems appropriate for existing conditions
- Implementing proper construction and installation of safety systems
- Training and supervising employees in the proper selection, use and maintenance of fall protection systems
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides a brief overview of the hazards of electrical work and the basic approaches to working safely.
Whenever you work with power tools or on electrical circuits, there is a risk of electrical hazards, especially electrical shock. Anyone can be exposed to these hazards at home or at work. Workers are exposed to more hazards because job sites can be cluttered with tools and materials, fast-paced, and open to the weather. Risk is also higher at work because many jobs involve electric power tools.
This presentation helps prepare you for additional safety training such as hands-on exercises and more detailed reviews of regulations for electrical work. Practices that will help keep you safe and free of injury are emphasized. This presentation will also present to you important definitions and notes. To give you an idea of the hazards caused by electricity, case studies about real-life deaths will be described.
This 2 PDH online interactive presentation is intended for electrical and mechanical engineers, electricians, plant operators, construction personnel and others seeking an understanding of the basics of electrical system safety.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Understanding the causes of an electrical shock
- Describing the dangers caused by an electric shock
- Describing the various electrical hazards
- Learning skills that help you recognize, evaluate, and control electrical hazards
- Preparing you for additional safety training such as hands-on exercises
- Providing detailed reviews of regulations for electrical work
- Learning safe practices and developing good safety habits
Once you finish watching the PDH interactive presentation, you will be redirected to your account to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on this interactive presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides a brief overview on effective ergonomic interventions that lower the physical demands of manual material handling work tasks, thereby lowering the incidence and severity of the musculoskeletal injuries they can cause.
Manual material handling work contributes to a large percentage of the over half a million cases of musculoskeletal disorders reported annually in the United States. Musculoskeletal disorders often involve strains and sprains to the lower back, shoulders, and upper limbs. They can result in protracted pain, disability, medical treatment, and financial stress for those afflicted with them.
Scientific evidence shows that effective ergonomic interventions have a potential not only for reducing injury-related costs but also for improving a company’s productivity, product quality, and overall business competitiveness.
This 1 PDH online interactive presentation is applicable to engineers, managers and supervisors who are interested in learning more about ergonomic interventions that reduce the physical demands of manual material handling work.
This PE continuing education interactive presentation is intended to provide you with the following specific knowledge and skills:
- Familiarizing with the basics of manual material handling
- Understanding the conditions associated with the development of injuries in manual material handling tasks
- Understanding the different types of ergonomic improvements and the importance of improving the workplace
- Learning about easier ways to manually lift, lower, fill, or empty containers by introducing safer work practices
- Exploring alternatives to the manual handling of individual containers, by introducing safer work equipment
Once you finish watching the PDH interactive presentation, you will be redirected to your account to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this interactive presentation.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

This online engineering PDH interactive presentation provides a brief outline on the types of radiation produced by natural and man-made sources, the typical radiation doses and dose limits, along with the health effects associated with radiation exposure.
Radiation is energy in the form of waves or streams of particles. There are many kinds and forms of radiation all around us, and their sources can be both natural and man-made. Sound and visible light are familiar forms of radiation; other types include ultraviolet radiation, infrared radiation, and radio and television signals. However, uncontrolled use of man-made radiation carries a potential risk to the health and safety of workers and the public.
This presentation provides clear and simple information about radiation: what it is, where it comes from and how it is used. It also presents information on radiation health effects, radiation doses and how the Canadian Nuclear Safety Commission ensures the safety of the Canadian nuclear sector through its comprehensive regulatory framework and vigilant oversight.
This 1 PDH online interactive presentation is applicable to safety engineers and professionals who are interested in learning more about nuclear safety.
- Understanding the definitions of atoms, isotopes and radioisotopes
- Familiarizing with the types of radiation: non-ionizing and ionizing radiation
- Knowing the natural and man-made sources of ionizing radiation
- Understanding the health effects of radiation exposure and how it causes cancer
- Familiarizing with the epidemiological evidence of the effect of the radiation exposure
- Identifying the radiation dose limits and the typical radiation doses produced by natural and man-made sources
- Learning the types of radiation doses: absorbed, equivalent and effective dose
- Familiarizing with the rules regulating radiation
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

Note: This is a recorded video presentation and does not qualify as a live interactive course nor a live webinar.
This online engineering PDH video presentation presents important concepts in the realm of engineering project implementation, construction and workplace safety.
This course begins with importance of safety, supported by safety statistics and clarification of “myths” about need for safe practices at work and at home. Most of the mainstream, PPE, Personal Protective Equipment and their proper use, is introduced through illustrations and in-class discussion. The importance of Workplace Environmental Safety and Health – namely, indoor air quality - is covered with emphasis on HVAC Systems and Mold Issues, as pertinent to residential, commercial, and industrial operations. This course covers proven safety best practices that engineers and technical managers find useful in successful implementation of projects and in safe operations of workplace. This course covers the safety risk analysis process in the engineering design phase, on projects and in operations. The latter part of this course deals with the one of the most significant hazards, in almost any environment, “fire.”
This 8 PDH video presentation is designed for design engineers, safety engineers, project engineers, construction personnel, construction supervision, principals/owners of construction firms and construction administrative staff.
This PE continuing education video presentation is intended to provide you with the following specific knowledge and skills:
- Learning about personal protective equipment and its proper use
- Understanding OSHA I and I Rate Calculations
- Understanding myths and misconceptions about safety
- Performing safety risk assessments of equipment, systems and projects.
- Understanding arc flash and electrical shock hazard
- Learning about ergonomics in equipment and workplace design
For this course, you will need to watch the video presentation titled, “Safety Hot Topics - Debunking the Myths”. To access the video presentation, you will need to log in or register and purchase the course. Following course purchase, please click on the link provided in your account history to view the video presentation. The duration of the video presentation is approximately 368 minutes.
Once you are finished watching the video presentation, you will need to click on the link provided at the end of the presentation to access your account and take the quiz. You will need to take a multiple-choice quiz consisting of forty (40) questions to earn 8 PDH credits. The quiz will be based on this video presentation. The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.