Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

Courses by Provider

Tennessee Wastewater & Health/Safety/Welfare 24 PDH Discount Pkg 2

PACKAGE NO: TN24C-13
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Wastewater Treatment Processes and Systems
COURSE NO: C07-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Wastewater Treatment Processes and Systems
Course Highlights

This online engineering PDH course provides information on individual onsite/decentralized treatment technologies or unit processes. Information on typical application, design, construction, operation, maintenance, cost, and pollutant removal effectiveness is provided for most classes of treatment units and their related processes. This information is intended to be used in the preliminary selection of a system of treatment unit processes that can be assembled to achieve predetermined pollutant discharge concentrations or other specific performance requirements.

 

This 7 PDH online course is applicable to civil, and environmental engineers, as well as design and construction personnel involved with the planning, selection and design of subsurface wastewater infiltration systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding of conventional system types and treatment options
  • Knowledge of the subsurface wastewater infiltration system
  • Establishing design considerations
  • Evaluating construction management and contingency options
  • Understanding the design, construction and functionality of septic tanks
  • Understanding the design, construction and functionality of sand/media filters
  • Understanding the design, construction and functionality of aerobic treatment units
Course Document

In this professional engineering CEU course, you need to review Chapter 4 of the USEPA Onsite Wastewater Treatment Systems Manual, EPA/625/R-00/008, "Treatment Processes and Systems". 

To view, print and study the course document, please click on the following link(s):
Wastewater Treatment Processes and Systems (3.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty five (35) questions to earn 7 PDH credits. The quiz will be based on Chapter 4 of this EPA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Wastewater Treatment System Selection
COURSE NO: C02-009
COURSE PROVIDER: Gilbert Gedeon, P.E.
Wastewater Treatment System Selection
Course Highlights

This online engineering PDH course provides guidance on the selection process of the subsurface wastewater infiltration system. It describes various steps involved in the selection process including understanding of the prevailing design conditions, matching these conditions to system performance, establishing design boundaries and boundary loadings, evaluating the receiving environment and mapping out the site.

 

Selecting the appropriate system type, size, and location at the site depends on the wastewater flow and composition information, site- and landscape-level assessments, performance requirements, and the array of available technology options. Key to selecting, sizing, and siting the system are identifying the desired level of performance and ensuring that the effluent quality at the performance boundaries meets the expected performance requirements.

 

This 2 PDH online course is applicable to civil, and environmental engineers, as well as design and construction personnel involved with the planning, selection and design of subsurface wastewater infiltration systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills: 

  • Evaluating design conditions and selecting the appropriate system
  • Matching design conditions to system performance
  • Establishing design boundaries and boundary loadings
  • Evaluating the receiving environment
  • Mapping the site
  • Developing the initial system design
  • Rehabilitating and upgrading existing systems
Course Document

In this professional engineering CEU course, you need to review Chapter 5 of the USEPA Onsite Wastewater Treatment Systems Manual, EPA/625/R-00/008, "Treatment System Selection". 

To view, print and study the course document, please click on the following link(s):
Wastewater Treatment System Selection (2.84 MB)
Course Quiz
​Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on Chapter 5 of this EPA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Centralized Wastewater Treatment for Facilities Managing Oil and Gas Extraction Wastes: Wastewater Characterization and Management
COURSE NO: C02-077
COURSE PROVIDER: Gilbert Gedeon, P.E.
Centralized Wastewater Treatment for Facilities Managing Oil and Gas Extraction Wastes: Wastewater Characterization and Management
Course Highlights

This online engineering PDH course investigates  whether the current Centralized Wastewater Treatment (CWT) Effluent Limitations Guidelines and Standards (ELGs) are adequately managing wastewater discharges from CWT facilities accepting oil and gas extraction wastes.

 

The EPA collected and evaluated data regarding oil and gas wastewater characteristics, as well as data characterizing discharges from CWT facilities accepting oil and gas extraction wastes, which are presented in this course.

 

The exploration, development and production of oil and gas reserves vary markedly from region to region. There are a number of solid and liquid waste materials generated during oil and gas exploration, extraction and production, and these waste materials may be managed by CWT facilities. The nature and characteristics and quantity of the wastes generated depend upon a number of factors, such as the type of drilling, the characteristics of the formation, the depth of the well and the type and quantity of chemical additives used during drilling, production and well maintenance activities.

 

This 2 PDH online course is intended for chemical, petroleum, environmental and industrial engineers as well as other interested in understanding the wastewater characterization and management used at CWT to treat oil and gas extraction wastewaters.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the basics of the wastes that are discharged from oil and gas extraction activities
  • Familiarizing with pollutants that are considered for evaluation in drilling wastewater
  • Gaining an overview of the additives used in well development along with their purpose
  • Familiarizing with pollutants that are considered for evaluation in produced water
  • Familiarizing with characterizing the concentrations of pollutants in process wastewater discharges
Course Document
In this professional engineering CEU course, you need to review “Centralized Wastewater Treatment for Facilities Managing Oil and Gas Extraction Wastes: Wastewater Characterization and Management”, which is based on Section 5 of the U.S. EPA publication “Detailed Study of the Centralized Waste Treatment Point Source Category for Facilities Managing Oil and Gas Extraction Wastes, publication number EPA-821-R-18-004, dated May 2018.
To view, print and study the course document, please click on the following link(s):
CWT FOR FACILITIES MANAGING OIL AND GAS EXTRACTION WASTES: WASTEWATER CHARACTERIZATION AND MANAGEMET (3.8 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Public Right of Way Accessibility Guidelines (PROWAG)
COURSE NO: C02-041
Public Right of Way Accessibility Guidelines (PROWAG)
Course Highlights

This online engineering PDH course presents the main requirements for ADA compliance in the public right of way. Before PROWAG the ADA guidelines focused mainly on facilities on sites.  PROWAG is currently in its final public review and is scheduled to be adopted in 2012.  PROWAG addresses features common to public right of ways such as sidewalks, curb ramps, roadway crossings, and pedestrian crossing signals and on-street parking.

 

This 2 PDH online course is applicable to civil engineers, construction managers, architects and inspectors who are involved with construction in the public right of way.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the government agencies involved with PROWAG
  • Understanding which projects require PROWAG compliance
  • Knowing the differences between the current ADA requirements and PROWAG
  • Learning about PROWAG sidewalk and slope requirements
  • Learning about PROWAG curb ramp requirements
  • Learning about PROWAG detectable warning requirements
  • Understanding practical examples of reconstructing existing conditions to be PROWAG compliant
Course Document

In this professional engineering CEU course you will review the main requirements of PROWAG along with practical design examples.

To view, print and study the course document, please click on the following link(s):
Public Right of Way Accessibility Guidelines (4.43 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn two (2) PDH credits.  The quiz will be based on the entire document.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: ADA Update: A Primer for State and Local Government
COURSE NO: A01-005
ADA Update: A Primer for State and Local Government
Course Highlights

This online engineering PDH course provides general guid­ance to assist State and local governments in understanding and complying with current Americans with Disabilities Act (ADA) require­ments.

 

The Department of Justice revised its regulations implementing the ADA in September 2010. The new rules clarify issues that arose over the previous 20 years and contain new requirements, including the 2010 ADA Standards for Accessible Design (2010 Standards).

 

This 1 PDH online course is intended for engineers employed by State or local governments.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Knowing who is protected under the ADA
  • Understanding people’s responsibilities under the ADA
  • Understanding the general non-discrimination requirements
  • Learning how to make the built environment accessible
  • Understanding the use of ADA coordinators, grievance procedures and self-evaluation plans
Course Document

In this professional engineering CEU course, you need to review the course document titled, “ADA Update: A Primer for State and Local Government,” June, 2015.

To view, print and study the course document, please click on the following link(s):
ADA Update: A Primer for State and Local Government (2.25 MB
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on this ADA publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Personal Protective Equipment
COURSE NO: T03-003
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Personal Protective Equipment
Course Highlights

This online engineering PDH course addesses Personal Protective Equipment (PPE) types, selection and training, as well as conducting a hazard assessment of the workplace.

 

Hazards exist in every workplace in many different scenarios: sharp edges, falling objects, flying sparks, chemicals, noise and a myriad of other potentially dangerous situations. Controlling a hazard at its source is the best way to protect employees. Depending on the hazard or workplace conditions, OSHA recommends the use of engineering or work practice controls to manage or eliminate hazards to the greatest extent possible. Therefore, OSHA developed the Personal Protection Equipment Standard to protect employees from workplace hazards that can cause injury.

 

This 3 PDH online course is applicable to all engineers, employers, building owners, facility managers, and all personnel working on construction projects.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the types of personal protective equipment (PPE)
  • Knowing the basics of conducting a "hazard assessment" of the workplace
  • Selecting the appropriate PPE for a variety of circumstances
  • Understanding what kind of training is needed for the proper use and care of PPE

 

Course Document

In this professional engineering CEU course, you need to review OSHA 3151-12R, "Personal Protective Equipment". 

To view, print and study the course document, please click on the following link(s):
Personal Protective Equipment (676 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on this OSHA publication

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Controlling Electrical Hazards
COURSE NO: E02-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Controlling Electrical Hazards
Course Highlights

This online engineering PDH course provides OSHA guidance on controlling electrical hazards for protecting workers from exposure to electrical hazards.

 

Electricity has been long recognized as a serious workplace hazed, exposing employees to electric shock, electrocution, burns, fires and explosions. According to the Bureau of Labor Statistics, many workers have died from electrocutions at work, accounting for as many as 5% of all on-the-job-fatalities in a given year. What makes these statistics more tragic is that most of these fatalities could have been easily avoided.

 

OSHA recognizes that electrical hazards present serious hazards to all workers involved. Therefore, OSHA developed several standards for Controlling Electrical Hazards to protect employees working in the construction industry from exposure to electrical hazards.

 

This 2 PDH online course is applicable to employers, building owners, engineers, electricians, managers, construction workers and any other personnel working on construction projects that involve exposure to electrical hazards.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • What affects the flow of electricity
  • What is the cause of shocks and their effect on the body
  • How to react if someone "freezes" to a live electrical contact
  • How to protect yourself against electrical hazards
  • What protection does insulation provide
  • What are the different types of insulation
  • What are circuit protection devices
  • What work practices help protect you from electrical hazards
  • What role do tools play
  • Employee training
Course Document

In this professional engineering CEU course, you need to review OSHA 3075, "Controlling Electrical Hazards". 

To view, print and study the course document, please click on the following link(s):
Controlling Electrical Hazards (305 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on this OSHA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics Case Study: The Challenger Disaster
COURSE NO: LE3-001
Engineering Ethics Case Study: The Challenger Disaster
Course Highlights

This online engieering PDH course provides instruction in engineering ethics through a case study of the Space Shuttle Challenger disaster. The minimum technical details needed to understand the physical cause of the Shuttle failure are presented. The disaster itself is chronicled through NASA photographs. Next the decision-making process, especially the discussions occurring during the teleconference held on the evening before the launch, is described. Direct quotations from engineers interviewed after the disaster are used to illustrate the ambiguities of the data and the pressures that the decision-makers faced in the months and hours preceding the launch. The course culminates in an extended treatment of six ethical issues raised by Challenger.

 

This 3 PDH online course is intended for all engineers who are interested in gaining a better understanding about the ethical issues that lead to the Challenger disaster and how they could have been avoided.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Common errors to avoid in studying the history of an engineering failure: the retrospective fallacy and the myth of perfect engineering practice
  • Shuttle hardware involved in the disaster
  • Decisions made in the period preceding the launch
  • Ethical issue: NASA giving first priority to public safety over other concerns
  • Ethical issue: the contractor giving first priority to public safety over other concerns
  • Ethical issue: whistle blowing
  • Ethical issue: informed consent
  • Ethical issue: ownership of company records
  • Ethical issue: how the public perceives that an engineering decision involves an ethical violation
Course Document

In this professional engineering CEU course, you need to review the course document titled, "Engineering Ethics Case Study: The Challenger Disaster".

To view, print and study the course document, please click on the following link(s):
Engineering Ethics Case Study: The Challenger Disaster (1.46 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Ethics in Professional Practice
COURSE NO: LE2-007
Ethics in Professional Practice
Course Highlights

In this online engineering PDH course, background on the philosophical models that guide ethical behavior is discussed and then applied to specific situations in engineering codes of ethics. This course is based on the American Society of Mechanical Engineers Professional Practice Curriculum, Volume 8, Section: Engineering Ethics.

 

Many engineering organizations have drafted codes of ethics to which their members are required to commit.  Generally, these codes are quite similar and are based on a few fundamental principles which provide guidance to professional engineers in common situations. Nevertheless, there are many difficult or ambiguous situations in which the best ethical solution is difficult to determine.

 

This 2 PDH online course is intended primarily for engineers seeking to learn ethical principles and how to apply them to their professional practice.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Determining ethical behavior using several philosophical models
  • Evaluating a practical situation in terms of a professional code of ethics
  • Identifying situations that represent conflicts of interest and formulate a proper response
  • Applying the standards of professional ethics in technical communication
  • Recognizing environmental impacts of engineering work
  • Considering principles of sustainable development in the performance of professional duties
Course Document

In this professional engineering CEU course, you need to review "Ethics in Professional Practice" published by the American Society of Mechanical Engineers (ASME). (This course document is reproduced by permission of the ASME (www.asme.org). You may also download from or view this course document on the ASME's website by clicking on Ethics in Professional Practice).

To view, print and study the course document, please click on the following link(s):
Ethics in Professional Practice (268 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credit. The quiz will be based on this ASME publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: