Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Wisconsin Transportation and Ethics 17 PDH Discount Package 1

PACKAGE NO: WI17C-21
PACKAGE PDH: 17
PACKAGE PRICE: $224.4
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Impact of Exempt Vehicles on HOV Lanes
COURSE NO: C05-012
COURSE PROVIDER: Gilbert Gedeon, P.E.
Impact of Exempt Vehicles on HOV Lanes
Course Highlights

This online engineering PDH course presents information on defining high-occupancy vehicle (HOV) lane capacity, options for using available HOV lane capacity, and analyzing HOV exemption policies. It examines the potential impact of certain exempt vehicles on the operation of high-occupancy vehicles (HOV) facilities. The possible exempt vehicles examined in this course include environmentally friendly vehicles, and law enforcement, emergency services, and designated public transportation vehicles. It also presents the experience with the use of HOV lanes by these types of exempt vehicles. Finally, it examines the potential issues and approaches for allowing exempt vehicles to use HOV lanes.

 

Traffic congestion continues to be a major issue in metropolitan areas throughout the country. The agencies responsible for the surface transportation system in these regions use a variety of approaches and techniques to address concerns relating to traffic congestion, mobility, and air quality. The use of HOV facilities represents one approach in use or being considered in many urban areas.

 

This 5 PDH online course is applicable to traffic engineers, transportation planners, conceptual and detail designers, and other technical professionals who will be considering HOV exemption policies as well as monitoring and evaluating the use of HOV lanes by exempt vehicles.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about HOV facilities and HOV lane capacities
  • Evaluating options for using HOV lane capacities
  • Analyzing HOV exemption policies on traffic flow
  • Considering HOV exemption for environmentally friendly vehicles
  • Considering HOV exemptions for law enforcement vehicles
  • Considering HOV exemptions for law public transportation vehicles
Course Document

In this professional engineering CEU course, you need to review the Federal Highway Administration Publication FHWA-OP-05-058, "Potential Impact of Exempt Vehicles on HOV Lanes".

To view, print and study the course document, please click on the following link(s):
Impact of Exempt Vehicles on HOV Lanes (1.6 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 5 PDH credits. The quiz will be based on this FHWA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Geometric Design for Roads, Streets, Walks and Open Storage Areas
COURSE NO: C03-018
COURSE PROVIDER: Gilbert Gedeon, P.E.
Geometric Design for Roads, Streets, Walks and Open Storage Areas
Course Highlights

This online engineering PDH course refers to military design requirements and objectives and provides guidance on the general provisions and geometric design criteria for the design of roads, streets, bridges, walks, parking, residence drives and storage areas. It discusses how geometric design deals with the dimensions of the visible features of a facility such as alignment, sight distances, widths, slopes, and grades.

 

This 3 PDH online course is applicable to civil and traffic engineers, technical professionals and construction personnel who are interested in gaining a better understanding of geometric design for roadways, walkways and open storage areas.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the purpose, scope and definitions of geometric design
  • Understanding the general provisions for access highway and installation highway design
  • Understanding the design basis for roads, streets and storage areas
  • Understanding the principles of geometric design for underpass roadways, bridges, walks, parking and residence drives

 

Course Document

In this professional engineering CEU course, you need to review the course document titled "General Provisions and Geometric Design for Roads, Streets, Walks and Open Storage Areas" prepared by the Department of Defense, Unified Facilities Criteria Publication "UFC 3-250-18FA", January 2006.

To view, print and study the course document, please click on the following link(s):
Geometric Design for Roads, Streets, Walks, and Open Storage Areas (1.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this DOD publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Transportation Management Plans for Work Zones
COURSE NO: C07-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Transportation Management Plans for Work Zones
Course Highlights

This online engineering PDH course sets forth some basic guiding principles and describes a general approach for developing, implementing, and assessing TMPs. This course is a compendium of guidance material, available resources, and suggested practices to help develop, implement, and assess transportation management plans (TMP) for work zones.

 

Work zone objectives, needs, and issues vary from project to project. Therefore, it is ultimately up to the professional to establish procedures and implement TMPs that best serve the safety and mobility needs of the traveling public, highway workers, businesses, and community.

 

This 7 PDH online course is applicable to transportation planners, traffic engineers, agency personnel as well as design and construction personnel involved with the development, review, approval, implementation, and assessment of TMPs.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the purpose of transportation management plans
  • Learning the process for TMP development, implementation and assessment
  • Knowledge of potential TMP components
  • Implementing work zone impacts management strategies
  • Familiarizing with current TMP use, examples and practices
Course Document

In this professional engineering CEU course, you need to review the Federal Highway Administration Publication FHWA-HOP-05-066, "Developing and Implementing Transportation Plans for Work Zones".

To view, print and study the course document, please click on the following link(s):
Transportation Management Plans for Work Zones (2.6 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty five (35) questions to earn 7 PDH credits. The quiz will be based on this FHWA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for Wisconsin Professional Engineers
COURSE NO: WI2-004
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for Wisconsin Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to Wisconsin Professional Engineers. It is also offered as a 2 PDH recorded video presentation and as a 2 PDH live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of Wisconsin. Excerpts from Chapters A-E 1 to A-E 13 of the Wisconsin Administrative Code and Chapter 443 of the Wisconsin Statutes which relate to the rules of professional conduct are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Since engineers are faced with frequent moral and ethical dilemmas while practicing their engineering profession, this course will provide you with moral and ethical guidance in your decision making process. Most importantly, it will provide you with insight on how to conduct, respect and protect your engineering practice with the utmost professionalism.

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of Wisconsin and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete thirty (30) professional development hours, at least two of which must be relative to the rules professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the laws and rules regulating the practice of engineering in the State of Wisconsin
  • Understanding the role of the Wisconsin Board and its disciplinary authority
  • Learning about engineering ethics and the rules of professional conduct and responsibility
  • Gaining an overview of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for Wisconsin Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
ENGINEERING ETHICS FOR WISCONSIN PROFESSIONAL ENGINEERS (775 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire course document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: