Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

New Jersey Civil and Ethics 24 PDH Discount Package 1

PACKAGE NO: NJ24C-14
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Curing Portland Cement Concrete Pavements
COURSE NO: C05-006
COURSE PROVIDER: Gilbert Gedeon, P.E.
Curing Portland Cement Concrete Pavements
Course Highlights

This online engineering PDH course provides guidance on details of concrete curing practice as they pertain to construction of Portland cement concrete pavements. It is organized around the major events in curing pavements: curing immediately after placement (initial curing), curing during the period after final finishing (final curing), and termination of curing and evaluation of effectiveness of curing.

 

Curing has long been recognized as an important process in constructing durable concrete pavements. Proper curing allows the concrete to develop its potential strength and durability. Inadequate curing can result in surface damage in the form of plastic shrinkage cracking, spalling, and erosion of paste. Since many variables influence the choice of curing materials and when and how to apply curing, the material presented places particular emphasis on attention to details with respect to moisture retention and concrete temperature control.

 

This 5 PDH  online  course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel involved with the design and installation of concrete pavements.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Selection of curing materials and procedures
  • Analysis of concrete properties and jobsite conditions
  • Knowing how to adjust the curing practice to account for specific project conditions
Course Document

In this professional engineering CEU course, you need to review the Federal Highway Administration Publication FHWA-RD-02-099, "Guide for Curing of Portland Cement Concrete Pavements". 

To view, print and study the course document, please click on the following link(s):
Curing Portland Cement Concrete Pavements (1.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 5 PDH credits. The quiz will be based on this FHWA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Evaluation and Design of Concrete Repairs
COURSE NO: C05-008
COURSE PROVIDER: Gilbert Gedeon, P.E.
Evaluation and Design of Concrete Repairs
Course Highlights

This online engineering PDH course provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying causes of that condition, and selecting an appropriate repair material and method for any deficiency found. A basic understanding of underlying causes of concrete deficiencies is essential to perform meaningful evaluations of concrete structures.

 

This 5 PDH online course is applicable to civil, geotechnical and structural engineers, as well as design and construction personnel working on construction projects involving evaluation and repair of concrete structures.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Evaluation of concrete in concrete structures
  • Understanding the underlying causes of distress and deterioration in concrete
  • Planning and design of concrete repairs
Course Document

In this professional engineering CEU course, you need to review Chapters 2, 3 and 4 of the US Corps of Engineers Publication EM 1110-2-2002, "Evaluation and Repair of Concrete Structures".

To view, print and study the course document, please click on the following link(s):
Evaluation and Design of Concrete Repairs (3.9 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 5 PDH credits. The quiz will be based on Chapters 2, 3 and 4 of this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Introduction to Shotcrete Applications
COURSE NO: C04-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Introduction to Shotcrete Applications
Course Highlights

This online engineering PDH course provides guidance on the selection, proportioning and application of shotcrete as a construction material. It explains the dry-mix process in which most of the mixing water is added at the nozzle. It also explains the wet-mix process in which all of the materials are mixed before entering the delivery hose.

 

This 4 PDH online course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel involved with the planning and design of structures using shotcrete.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning the different types of shotcrete and its applications
  • Knowing the types and properties of material used in shotcrete  
  • Understanding the dry- and wet-mixing and proportioning process
  • Understanding the pre-construction testing and evaluation process
  • Placing, finishing and curing of shotcrete
  • Maintaining and repairing surface defects of shotcrete
Course Document

In this professional engineering CEU course, you need to review the U.S. Corps of Engineers Publication EM 1110-2-2005, "Standard Practice for Shotcrete".

To view, print and study the course document, please click on the following link(s):
Introduction to Shotcrete Applications (1.9 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Roller Compacted Concrete
COURSE NO: S08-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Roller Compacted Concrete
Course Highlights

This online engineering PDH course provides information and guidance on the use of RCC in dams and other civil works structures. Elements discussed include investigation and selection of materials, mixture proportioning, design and construction considerations, construction equipment and techniques, inspection, and performance.

 

The American Concrete Institute (ACI) defines roller-compacted concrete (RCC) as "concrete compacted by roller compaction; concrete that, in its unhardened state, will support a roller while being compacted." Properties of hardened RCC can be similar to those of conventionally placed concrete. However, RCC can also be made with hardened properties that are outside the range of typical properties of conventionally placed concrete. The term "roller compaction" is also defined by ACI as "a process for compacting concrete using a roller, often a vibrating roller."

 

RCC may be considered for application where no-slump concrete can be transported, placed, and compacted using earth and rock-fill construction equipment. Ideal RCC projects will involve large placement areas, little or no reinforcement, and little or no embedded metal work or other discontinuities such as piles. Application of RCC should be considered when it is economically competitive with other construction methods. It may be considered in lieu of gabions or riprap for bank protection, especially in those areas where riprap is scarce. It may be considered for large work pads, aprons, or paved areas, massive open foundations, base slabs, cofferdams, massive backfill, emergency repairs, and overtopping protection for  embankment dams. It may be used in lieu of conventionally placed concrete in concrete gravity and arch-gravity dams. RCC may be considered for use in levees where foundations are adequate and may also be used in caps for jetties to reduce the amount of required rock.

 

This 8 PDH online course is applicable to civil, structural or geotechnical engineers, as well as design and construction personnel involved with the planning, design, construction of roller-compacted concrete structures.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • RCC applications, objectives and advantages
  • Investigation and selection of materials
  • Mixture proportioning considerations and selection
  • Understanding the properties of RCC
  • Design and construction considerations
  • Construction methods and equipment
  • Quality control and quality assurance in RCC construction
  • RCC performance
Course Document

In this professional engineering CEU course, you need to review the US Corps of Engineers Publication EM 1110-2-2006, "Roller Compacted Concrete".

To view, print and study the course document, please click on the following link(s):
Roller Compacted Concrete (1.7 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifty (50) questions to earn 8 PDH credits. The quiz will be based on this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for New Jersey Professional Engineers
COURSE NO: NJ2-005
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for New Jersey Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to New Jersey Professional Engineers. It is also offered as a 2 PDH recorded video presentation and as a 2 PDH live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of New Jersey. Excerpts from Title 45, Chapter 8 of the New Jersey Statutes and Title 13, Chapter 40 of the New Jersey Regulations, which relate to the rules of profession conduct are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Since engineers are faced with frequent moral and ethical dilemmas while practicing their engineering profession, this course will provide you with moral and ethical guidance in your decision making process. Most importantly, it will provide you with insight on how to conduct, respect and protect your engineering practice with the utmost professionalism.

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of New Jersey and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete twenty four (24) professional development hours, at least two (2) of which must be relative to the law and rules professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Overview of the laws and rules regulating the practice of engineering in the State of New Jersey
  • Understanding the roles of the New Jersey Board as well as its disciplinary authority
  • Learning about engineering ethics and the laws and rules of professional conduct and responsibility
  • Review of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for New Jersey Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
Engineering Ethics for New Jersey Professional Engineers (951 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire course document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: