Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Nebraska Energy Efficiency and Ethics 7 PDH Discount Package 1

PACKAGE NO: NE07R-01
PACKAGE PDH: 7
PACKAGE PRICE: $126
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Small Wind Electric Systems to Power Your Home
COURSE NO: R03-017
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Small Wind Electric Systems to Power Your Home
Course Highlights

This online engineering PDH course provides basic information about small wind electric systems to help you decide if wind energy will work for you.

 

Wind is created by the unequal heating of the Earth's surface by the sun. Wind turbines convert the kinetic energy in wind into mechanical power that runs a generator to produce clean electricity.

 

Can I use wind energy to power my home? More people across the country are asking this question as they look for a hedge against increasing electricity rates and a way to harvest their local wind resources. Although wind turbines large enough to provide a significant portion of the electricity needed by the average U.S. home generally require 1 acre of property or more, approximately 19.3% of the U.S. population lives in rural areas and may own land parcels large enough to accommodate a wind energy system.

 

This 3 PDH online course is applicable to electrical and mechanical engineers and energy professionals who are interested in learning more about small wind electric systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with wind energy, terminology, and basic principles of wind turbines
  • Understanding the different ways to make a home more energy efficient
  • Understanding how and when small wind energy systems provide a practical and economical source of electricity
  • Learning about the size of wind turbines required for specific applications
  • Learning about the basic parts of a small wind electric system
  • Knowing where to find certified small wind turbines, as well as installation and maintenance support
  • Calculating how much energy a wind electric system will generate
  • Gaining a general overview of hybrid wind energy systems
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Small Wind Electric Systems to Power Your Home”, which is prepared by Elie Tawil, P.E., LEED AP.
To view, print and study the course document, please click on the following link(s):
SMALL WIND ELECTRIC SYSTEMS TO POWER YOUR HOME (4.50 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Water Efficiency Management Guide for Mechanical Systems
COURSE NO: M02-055
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Water Efficiency Management Guide for Mechanical Systems
Course Highlights

This online engineering PDH course presents guidelines on how to reduce mechanical system water use in residential buildings. Mechanical systems are frequently utilized to provide heating and cooling for residential properties. They typically fall into two categories: centralized and decentralized systems.

 

Centralized mechanical systems provide heating and cooling from a central location, such as a mechanical room or utility penthouse. These systems are more common in mid- and high-rise multifamily properties and can include cooling towers, boilers, and steam systems, each of which uses water as the heat transfer medium. As a result, the use of water for building heating and cooling can be significant and using sound management practices is a good opportunity for water savings.

 

Decentralized mechanical systems treat each unit of a multifamily property as its own space, as if each unit were a stand-alone single-family residence. These systems do not typically use process water, so they are not the focus of this water efficiency management guide.

 

This 2 PDH online course is intended for mechanical, environmental and civil engineers, as well as other technical personnel who are interested in learning more about reducing water use in mechanical systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the basics principles behind single-pass cooling, cooling towers and boiler/steam systems
  • Understanding mechanical system water use
  • Familiarizing with the maintenance and best management practices
  • Knowing the mechanical systems retrofit and replacement options 
  • Familiarizing with the water savings calculations and assumptions
Course Document
In this professional engineering CEU course, you need to review “Water Efficiency Management Guide for Mechanical Systems” which is based on the U.S. Environmental Protection Agency publication number EPA 832-F-17-016c.
To view, print and study the course document, please click on the following link(s):
WATER EFFICIENCY MANAGEMENT GUIDE FOR MECHANICAL SYSTEMS (705 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Wireless Occupancy Sensors for Lighting Controls
COURSE NO: E01-012
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Wireless Occupancy Sensors for Lighting Controls
Course Highlights

This online engineering PDH course provides basic information on wireless occupancy for lighting controls.

 

Lighting use constitutes about 20% of the total energy consumption in commercial buildings. Adding lighting controls is a simple retrofit option than can save on energy costs while helping to meet agency and federal energy savings mandates. Some energy codes and federal standards require the use of lighting controls.

 

Studies have shown that adding lighting controls can reduce lighting energy use 10% to 90% or more depending on the use of the space in which the sensors are installed. One study conducted on a university campus found that installing wired occupancy sensors to control lighting in more than 200 rooms in 10 buildings provided an annual cost savings of about $14,000 with a simple payback of 4.2 years.

 

This 1 PDH online course is applicable to electrical engineers and others interested in gaining knowledge about wireless occupancy for lighting controls for a better sustainable design.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the different types of occupancy sensors and their characteristics including microphonic, ultrasonic, bluetooth, video image and dual technology
  • Gaining a general overview of the codes and standards of lighting controls
  • Learning about the types of light source to use for occupancy sensors
  • Understanding how wireless sensors are powered and the best practices in using wireless sensors
  • Learning about the cost considerations for wire and wireless sensors
Course Document
In this professional engineering CEU course, you need to review the course document titled, " Wireless Occupancy Sensors for Lighting Controls”, which is based on the US department of Energy document “Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers”, dated December 2019.
To view, print and study the course document, please click on the following link(s):
WIRELESS OCCUPANCY SENSORS FOR LIGHTING CONTROLS (1.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for Nebraska Professional Engineers
COURSE NO: NE1-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for Nebraska Professional Engineers
Note: This 1 PDH engineering ethics course is applicable only to Nebraska Professional Engineers. It is also offered as a 1 PDH recorded video presentation and as a 1 PDH live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of Nebraska. Title 110, Chapter 5, “Code of Practice”, of the Nebraska Rules and Regulations of the Rules, which relate to the laws and rules of profession conduct are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Since engineers are faced with frequent moral and ethical dilemmas while practicing their engineering profession, this course will provide you with moral and ethical guidance in your decision making process. Most importantly, it will provide you with insight on how to conduct, respect and protect your engineering practice with the utmost professionalism.

 

This 1 PDH online course is applicable to Professional Engineers licensed in the State of Nebraska and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete thirty (30) professional development hours, at least one (1) of which must be relative to the principals of professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Understanding the Nebraska laws and rules regulating the practice of engineering in the State of Nebraska and their application to Professional Engineers
  • Understanding the rules of professional conduct and responsibility, code of practice and engineering ethics
  • Familiarizing with the Nebraska Board disciplinary process and the various violations and corresponding penalties imposed by the board
Course Document

In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for Nebraska Professional Engineers”.

To view, print and study the course document, please click on the following link(s):
Engineering Ethics for Nebraska Professional Engineers (88 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire course document.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: