Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Courses by Provider


CED Monthly

Subscribe and get 20% off

Your name:

Your e-mail:




FB Twitter LinkedIn

Wisconsin Energy Efficiency and Ethics 17 PDH Discount Package 1

PACKAGE NO: WI17R-04
PACKAGE PDH: 17
PACKAGE PRICE: $224.4
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Heating and Cooling System Upgrades
COURSE NO: M03-022
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Heating and Cooling System Upgrades
Course Highlights

This online engineering PDH course identifies the opportunities for improving the performance of the heating and cooling system based on the type of system that is in place.

 

Heating and cooling systems are the largest single consumers of energy in buildings. These systems condition the air within a building so that occupants are comfortable. Heating and cooling systems consist mainly of chillers, boilers, cooling towers, and pumps. There are central heating and cooling systems, and unitary systems that combine heating and cooling. Opportunities exist for improvement to both central and unitary systems.

 

This 3 PDH online course is applicable to engineers, contractors, designers and other technical professionals who are involved in the retrofit of existing heating and cooling systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the best opportunities available for upgrading central cooling systems including chillers, cooling towers, water side economizers and pumps
  • Understanding the best opportunities available for upgrading central heating systems including boilers and furnaces
  • Understanding the best opportunities available for unitary systems including packaged or rooftop units, split system packaged units, air source heat pumps and water loop heat pump systems
  • Learning about new strategies aimed at saving energy such as geothermal heat pumps, district cooling and heating, radiant heating and cooling, cool storage, high temperature difference distribution, evaporative cooling, and non-electric cooling
Course Document

In this professional engineering CEU course, you need to review "Heating and Cooling System Upgrades" of the Energy Star Building Manual. (Energy Star is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy).

To view, print and study the course document, please click on the following link(s):
Heating and Cooling System Upgrades (2.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on this EPA/DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Water Efficiency Management Guide for Mechanical Systems
COURSE NO: M02-055
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Water Efficiency Management Guide for Mechanical Systems
Course Highlights

This online engineering PDH course presents guidelines on how to reduce mechanical system water use in residential buildings.

 

Mechanical systems are frequently utilized to provide heating and cooling for residential properties. They typically fall into two categories: centralized and decentralized systems. Centralized mechanical systems provide heating and cooling from a central location, such as a mechanical room or utility penthouse. These systems are more common in mid- and high-rise multifamily properties. Centralized mechanical systems can include cooling towers, boilers, and steam systems, each of which uses water as the heat transfer medium. As a result, the use of water for building heating and cooling can be significant and using sound management practices is a good opportunity for water savings.

 

Decentralized mechanical systems treat each unit of a multifamily property as its own space, as if each unit were a stand-alone single-family residence. These systems do not typically use process water, so they are not the focus of this water efficiency management guide.

 

This 2 PDH online course is intended for mechanical, environmental and civil engineers, as well as other technical personnel who are interested in learning more about reducing water use in mechanical systems.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the basics principles behind single pas cooling, cooling towers and boiler/steam systems
  • Understanding mechanical system water use
  • Familiarizing with the maintenance and best management practices
  • Knowing the mechanical systems retrofit and replacement options 
  • Familiarizing with the water savings calculations and assumptions
Course Document
In this professional engineering CEU course, you need to review “Water Efficiency Management Guide for Mechanical Systems” which is based on the U.S. Environmental Protection Agency publication number EPA 832-F-17-016c.
To view, print and study the course document, please click on the following link(s):
WATER EFFICIENCY MANAGEMENT GUIDE FOR MECHANICAL SYSTEMS (623 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Wind Turbine Technology
COURSE NO: R04-009
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Wind Turbine Technology
Course Highlights

This online engineering PDH course provides a brief overview of wind turbine technology and its associated components, discusses the financial considerations and the technological improvements that would be required to increase the reliance on wind energy in the future.   

 

Current turbine technology has enabled wind energy to become a viable power source in today’s energy market. Advancements in turbine technology that have the potential to increase wind energy’s presence are currently being explored through areas of study including reducing capital costs, increasing capacity factors, and mitigating risk through enhanced system reliability.

 

This 4 PDH online course is intended for renewable, sustainability, mechanical, electrical, and industrial engineers, as well as other technical personnel who are interested in gaining a basic understanding of wind turbine technology.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the basic configuration of the modern wind turbine
  • Knowing the options in improving wind turbine technology
  • Understanding the technical and financial risks involved in wind technology
  • Familiarizing with offshore wind technology
  • Learning about distributed wind technology (DWT) and their applications
Course Document
In this professional engineering CEU course, you need to review Chapter 2 of the "20% Wind Energy by 2030" publication by the U.S. Department of Energy, DOE/GO-102008-2567.
To view, print and study the course document, please click on the following link(s):
WIND TURBINE TECHNOLOGY (655 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Advancing Systems and Technologies to Produce Cleaner Fuels
COURSE NO: P03-003
COURSE PROVIDER: Gilbert Gedeon, P.E.
Advancing Systems and Technologies to Produce Cleaner Fuels
Course Highlights

This online engineering PDH course provides information on advancements made in systems and technologies related to oil and natural gas development to produce cleaner fuels. It pays special attention to advancements aimed at reducing the environmental impact associated with the production of oil and natural gas. It also discusses the safety conditions for those involved in the development process.

 

Fossil fuel resources account for 82% of total U.S. primary energy use because they are abundant, have a relatively low cost of production, and have a high energy density—enabling easy transport and storage. The infrastructure built over decades to supply fossil fuels is the world’s largest enterprise with the largest market capitalization. Of fossil fuels, oil and natural gas make up 63% of energy usage. Across the energy economy, the source and mix of fuels used across these sectors is changing, particularly the rapid increase in natural gas production from unconventional resources for electricity generation and the rapid increase in domestic production of shale oil. The United States will, for the foreseeable future, continue to rely heavily upon oil and natural gas to support its economy, national security, and energy security.

 

This 3 PDH online course is applicable to petroleum, chemical, mechanical and sustainability engineers and other technical personnel who are interested in learning more about the trends in advancing oil and gas development systems and technologies.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the Oil and Gas industry in the Energy Economy of the United States
  • Familiarizing with the latest technological advancements in Oil and Gas
  • Learning about the emerging research opportunities and the four themes to address R&D challenges
  • Learning the about the Oil and Gas challenges through specific technology assessments
  • Understanding the risks associated with the various aspects of oil and natural gas development
  • Learning from past oil and natural gas development mistakes and disasters to ensure they are not repeated
Course Document
In this professional engineering CEU course, you need to review "Advancing Systems and Technologies to Produce Cleaner Fuels" by the U.S. Department of Energy (DOE), from the Quadrennial Technology Review 2015, dated 2015.
To view, print and study the course document, please click on the following link(s):
ADVANCING SYSTEMS AND TECHNOLOGIES TO PRODUCE CLEANER FUELS (1.9 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Plug-in Electric Vehicle Handbook
COURSE NO: E02-022
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Plug-in Electric Vehicle Handbook
Course Highlights

This online engineering PDH course presents the considerations for hosting public charging stations for plug-in electric vehicles (PEVs). It provides detailed information about PEVs, charging basics, benefits, costs, and discusses the installation and maintenance of charging stations.

 

Concerns about the environmental impacts of conventional internal combustion engines (ICE) vehicles sparked a PEV renais­sance at the end of the 20th century. Today, PEVs are back and ready to compete with — and complement — the ubiquitous ICE tech­nology. First, advances in electric-drive technologies enabled commercialization of hybrid electric vehi­cles (HEVs), which integrate an ICE or other power source with batteries, regenerative braking, and an electric motor to boost fuel economy. Continued technological advances have spawned plug-in HEVs (PHEVs), which integrate small ICEs (or other power sources) and large, grid-chargeable batteries that enable all-electric driving ranges of 10 to 40 miles or more. Advanced technologies have also enabled manufactur­ers to introduce a new generation of EVs that don’t use an ICE at all. At the same time, charging station tech­nologies have evolved to facilitate a range of charging options and business models.

 

This 2 PDH online course is intended for mechanical and electrical engineers as well as others interested in learning more about plug-in electric vehicles.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the basics behind plug-in electric vehicles
  • Learning about the different types of charging methods
  • Understanding the costs and benefits of hosting charging stations
  • Learning about the basic installation and maintenance  considerations of charging stations
Course Document
In this professional engineering CEU course, you need to review the document, "Plug-in Electric Vehicle Handbook" which is based on the U.S. Department of Energy document "Plug-In Electric Vehicle Handbook for Public Charging Station Hosts", publication number DOE/GO-102012-3275.
To view, print and study the course document, please click on the following link(s):
PLUG-IN ELECTRIC VEHICLE HANDBOOK (2.3 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Advancing Sustainable Materials Management
COURSE NO: C01-021
COURSE PROVIDER: Gilbert Gedeon, P.E.
Advancing Sustainable Materials Management
Course Highlights

This online engineering PDH course presents the facts and statistics about the generation and disposition of municipal solid waste (MSW) over time in the United States. It examines the disposing of waste in landfills, recycling, composting, and combustion with energy recovery.

 

Approximately 262 million tons of MSW was generated in the United States in 2015. Understanding how waste is generated and disposed of is important for managing scarce materials.

 

This report analyzes MSW trends in generation and management, materials and products, and economic indicators affecting MSW. It also includes a section on the generation of construction and demolition (C&D) debris, which is not a part of MSW, but comprises a significant portion of the non-hazardous solid waste stream.

 

This 1 PDH online course is applicable to civil, environmental and sustainability engineers and other technical personnel who are interested in gaining a basic understanding of waste management on the individual and household level.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Knowing where MSW comes from and how it is disposed of
  • Understanding how to manage materials in order to maximize economic efficiency
  • Learning when recycling, composting, and combusting with energy recovery should be used
  • Familiarizing with the Sustainable Materials Management (SMM) process
Course Document
In this professional engineering CEU course, you need to review "Advancing Sustainable Materials Management" by the Environmental Protection Agency (EPA), publication EPA530-F-18-004, dated July 2018.
To view, print and study the course document, please click on the following link(s):
ADVANCING SUSTAINABLE MATERIALS MANAGEMENT (1.5 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for Wisconsin Professional Engineers
COURSE NO: WI2-004
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for Wisconsin Professional Engineers
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of Wisconsin. Excerpts from Chapters A-E 1 to A-E 13 of the Wisconsin Administrative Code and Chapter 443 of the Wisconsin Statutes which relate to the rules of professional conduct are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Since engineers are faced with frequent moral and ethical dilemmas while practicing their engineering profession, this course will provide you with moral and ethical guidance in your decision making process. Most importantly, it will provide you with insight on how to conduct, respect and protect your engineering practice with the utmost professionalism.

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of Wisconsin and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete thirty (30) professional development hours, at least two of which must be relative to the rules professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the laws and rules regulating the practice of engineering in the State of Wisconsin
  • Understanding the role of the Wisconsin Board and its disciplinary authority
  • Learning about engineering ethics and the rules of professional conduct and responsibility
  • Gaining an overview of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for Wisconsin Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
ENGINEERING ETHICS FOR WISCONSIN PROFESSIONAL ENGINEERS (270 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire course document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: