Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Courses by Provider


CED Monthly

Subscribe and get 20% off

Your name:

Your e-mail:




FB Twitter LinkedIn

Texas Electrical and Ethics 15 PDH Discount Package 2

PACKAGE NO: TX15E-04
PACKAGE PDH: 15
PACKAGE PRICE: $216
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Basic Electrical Theory
COURSE NO: E04-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Basic Electrical Theory
Course Highlights

This online engineering PDH course introduces basic electrical concepts. It starts by explaining the concept of the electrostatic force and the first law of electrostatics. It defines the basic electrical terminology and its corresponding units of measure. It continues to describe the methods of producing electricity. It also describes the principle of magnetism and magnetic circuits. Finally it provides a list of basic electrical symbols used to read and interpret electrical system diagrams and schematics.

 

This 4 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the theory of electricity.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding atoms and their forces
  • Distinguishing electrical components conductors, insulators and resistors
  • Understanding voltage and current
  • Learning the units of electrical measurements
  • Identifying the methods of producing voltage
  • Understanding magnetism and magnetic circuits
Course Document

In this professional engineering CEU course, you need to review Module 1, "Basic Electrical Theory" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science". 

To view, print and study the course document, please click on the following link(s):
Basic Electrical Theory (1.31 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Module 1 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: DC Circuits, Batteries, Generators and Motors
COURSE NO: E05-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
DC Circuits, Batteries, Generators and Motors
Course Highlights

This online engineering PDH course introduces the rules associated with the reactive components of inductance and capacitance and how they affect DC circuits. It also introduces batteries and describes the types of cells used, circuit arrangements, and associated hazards. This course further describes the types of DC generators and their application in terms of voltage production and load characteristics. Finally, it illustrates the types of DC motors and includes discussions of speed control, applications, and load characteristics.

 

This 5 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the basics of DC systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding inductance and capacitance
  • Learning battery terminology, battery theory, and battery operations
  • Understanding the different types of batteries and their hazards
  • Learning DC equipment terminology and construction
  • Gaining knowledge of DC generator theory and construction
  • Understanding DC motor theory and operation
  • Learning the different types of DC motors
Course Document

In this professional engineering CEU course, you need to review Modules 3 to 6 of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science".

To view, print and study the course document, please click on the following link(s):
DC Circuits, Batteries, Generators and Motors (1.76 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty (30) questions to earn 5 PDH credits. The quiz will be based on Modules 3 to 6 of this DOE publication. 

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Motor and Drive System Basics
COURSE NO: E02-008
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Motor and Drive System Basics
Course Highlights

This online engineering PDH course presents the basics of motor and drive systems and briefly describes important terms, relationships, and system design considerations. It also describes key factors involved in motor and drive selection and system design, and provides an overview of the different types of motors and drives and their applications.

 

This 2 PDH online course is applicable to electrical and mechanical engineers, designers, contractors, building professionals and manufacturers who are involved with motor and drive systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Detecting the indications of a poor system design
  • Learning about the different types of electric motors
  • Understanding motor operating characteristics
  • Selecting motors and drives for their corresponding applications
  • Understanding load duty cycles
  • Familiarizing with common motor selection problems
Course Document

In this professional engineering CEU course, you need to review Section 1, "Motor and Drive System Basics "of the Department of Energy (DOE) Publication "Improving Motor and Drive System Performance".

To view, print and study the course document, please click on the following link(s):
Motor and Drive System Basics (2.7 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Electrical Test Instruments and Measuring Devices
COURSE NO: E02-003
COURSE PROVIDER: Gilbert Gedeon, P.E.
Electrical Test Instruments and Measuring Devices
Course Highlights

This online engineering PDH course describes electrical measuring devices such as voltmeters, ammeters, ohmmeters and wattmeters. It also describes test equipment such as multimeters and meggers. It discusses the electrical parameters measured and the principles of operation of common instruments.

 

This 2 PDH  online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of electrical test instruments and measuring devices.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding meter movements
  • Learning about the various electrical measuring devices (voltmeters, ammeters, ohmmeters and wattmeters)
  • Learning about the various electrical test equipment (multimeters and meggers)

 

Course Document

In this professional engineering CEU course, you need to review Module 14, "Test Instruments and Measuring Devices" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science".

To view, print and study the course document, please click on the following link(s):
Electrical Test Instruments and Measuring Devices (2.53 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on Module 14 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Laws, Rules and Ethics for Texas Professional Engineers
COURSE NO: TX2-006
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Laws, Rules and Ethics for Texas Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to Texas Professional Engineers. It is also offered as a 1 PDH recorded video presentation and as a 1 PDH live interative webinar.
Accepted in:
Course Highlights

This online PDH course presents excerpts of the statutory laws and rules governing the practice of engineering in the State of Texas as stipulated in Title 22, Part 6 of the Texas Administrative Code, including proper use of the engineer’s seal, compliance, enforcement and more.

 

This continuing education course also presents the Texas laws and rules of ethics and professional responsibility for engineers to understand and apply when they are frequently faced with different moral dilemmas while practicing their profession. The rules of professional conduct will provide moral and ethical guidance to engineers in their decision making process. Most importantly, it will provide engineers with insight on how to respect and protect their engineering practice with the utmost professionalism.

 

This 2 PDH course is applicable to Professional Engineers licensed in the State of Texas and who are required to demonstrate continuing professional competency in engineering laws, rules and ethics as a condition of their license renewal. For each renewal period, every licensee must complete fifteen (15) professional development hours, at least one (1) of which must be relative to the Texas Laws and Rules, or to the rules of professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Overview of the laws and rules regulating to the practice of engineering in the State of Texas
  • Understanding the roles of the Texas Board and its disciplinary authority
  • Learning about the proper use of seal, compliance and enforcement in the State of Texas
  • Understanding the Texas Board disciplinary process
  • Learning about engineering ethics and the rules of professional conduct and responsibility
  • Review of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Laws, Rules and Ethics for Texas Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
Engineering Laws, Rules and Ethics for Texas Professional Engineers (641 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire course document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: