Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Courses by Provider


CED Monthly

Subscribe and get 20% off

Your name:

Your e-mail:




FB Twitter LinkedIn

New Mexico Civil and Ethics 30 PDH Discount Package

PACKAGE NO: NM30C-05
PACKAGE PDH: 30
PACKAGE PRICE: $324
To buy the package, please click on:
Courses in this Package
COURSE TITLE: An Introduction to Concrete Pavements
COURSE NO: C06-009
An Introduction to Concrete Pavements
Course Highlights

This online engineering PDH course provides information on the materials and construction procedures for portland cement concrete pavements. It describes the constituents to be used in concrete, the procedures to be used in manufacturing concrete, and the equipment and procedures to place, texture, and cure concrete for pavements. It is applicable to pavements for streets and roads, vehicle parking areas, and airfields.

 

This 6 PDH online course is intended for civil and structural engineers and other design and construction professionals seeking an introduction to the technologies, equipment and construction practices for portland cement concrete vehicular and airfield pavements.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about responsibilities for mixture proportioning
  • Learning how to prepare and test concrete samples for flexural strength
  • Learning about the relationship between water-cement ratio and strength of concrete
  • Learning how to determine the field control strength for concrete
  • Understanding the importance of air entrainment in concrete
  • Learning about the five principal types of concrete produced in the United States
  • Learning about grading of coarse and fine aggregate
  • Learning about deleterious materials in aggregate and why they must be controlled
  • Learning about admixtures and how and when they are employed
  • Learning about manufacturing, delivering and placing concrete
Course Document

In this professional engineering CEU course, you need to review the course document titled, "An Introduction to Concrete Pavements".

To view, print and study the course document, please click on the following link(s):
An Introduction to Concrete Pavements (1.32 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty five (35) questions to earn 6 PDH credits. The quiz will be based on the entire document.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Concrete Removal, Repair and Maintenance
COURSE NO: C06-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Concrete Removal, Repair and Maintenance
Course Highlights

This online engineering PDH course provides guidance on the removal methods of deteriorated concrete structures as well as guidance on materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete. A basic understanding of underlying causes of concrete deficiencies is essential to perform meaningful successful repairs.

 

This 6 PDH online course is applicable to civil, geotechnical and structural engineers, as well as design and construction personnel working on construction projects involving evaluation and repair of concrete structures.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarization with concrete removal methods and preparation for repair
  • Understanding the types of materials and methods for rehabilitation
  • Understanding how to maintain concrete structures following repair
Course Document

In this professional engineering CEU course, you need to review only Chapters 5, 6 and 7 of the US Corps of Engineers Publication EM 1110-2-2002, "Evaluation and Repair of Concrete Structures".

To view, print and study the course document, please click on the following link(s):
Concrete Removal, Repair and Maintenance (1.57 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty (30) questions to earn 6 PDH credits. The quiz will be based on only Chapters 5, 6 and 7 of this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Curing Portland Cement Concrete Pavements
COURSE NO: C05-006
COURSE PROVIDER: Gilbert Gedeon, P.E.
Curing Portland Cement Concrete Pavements
Course Highlights

This online engineering PDH course provides guidance on details of concrete curing practice as they pertain to construction of Portland cement concrete pavements. It is organized around the major events in curing pavements: curing immediately after placement (initial curing), curing during the period after final finishing (final curing), and termination of curing and evaluation of effectiveness of curing.

 

Curing has long been recognized as an important process in constructing durable concrete pavements. Proper curing allows the concrete to develop its potential strength and durability. Inadequate curing can result in surface damage in the form of plastic shrinkage cracking, spalling, and erosion of paste. Since many variables influence the choice of curing materials and when and how to apply curing, the material presented places particular emphasis on attention to details with respect to moisture retention and concrete temperature control.

 

This 5 PDH  online  course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel involved with the design and installation of concrete pavements.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Selection of curing materials and procedures
  • Analysis of concrete properties and jobsite conditions
  • Knowing how to adjust the curing practice to account for specific project conditions
Course Document

In this professional engineering CEU course, you need to review the Federal Highway Administration Publication FHWA-RD-02-099, "Guide for Curing of Portland Cement Concrete Pavements". 

To view, print and study the course document, please click on the following link(s):
Curing Portland Cement Concrete Pavements (700 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 5 PDH credits. The quiz will be based on this FHWA publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Design and Construction of Breakaway Walls
COURSE NO: S02-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Design and Construction of Breakaway Walls
Course Highlights

This online engineering PDH course provides design and construction guidance for breakaway walls below elevated coastal buildings in accordance with the National Flood Insurance Program (NFIP). This course describes prescriptive design details that comply with the requirements of the NFIP regulations and that may be used by design professionals as guidance.

 

In Coastal High Hazard Areas (Zones V, VE, and V1-30), the National Flood Insurance Program (NFIP) regulations require that communities participating in the program adopt floodplain management ordinances or laws requiring that all new and substantially improved buildings be elevated to or above the base flood elevation (BFE) on foundations consisting of piles, posts, piers, or columns.

 

This 2 PDH online course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel involved with the planning and design of elevated structures in coastal areas.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the specifications for NFIP-compliant construction 
  • Knowing the requirements for construction with flood-resistant materials
  • Constructing insect screening and lattice work as enclosures below elevated buildings
  • Knowing the impact of a breaking wave on vertical surfaces
  • Placing, finishing and curing of shotcrete
  • Maintaining and repairing surface defects of shotcrete
Course Document

In this professional engineering CEU course, you need to review the Federal Emergency Management Agency (FEMA) Publication FIA-TB-9, "Design and Construction Guidance for Breakaway Walls".

To view, print and study the course document, please click on the following link(s):
Design and Construction of Breakaway Walls (246 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on this FEMA publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for New Mexico Professional Engineers
COURSE NO: NM2-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for New Mexico Professional Engineers
Note: This 2 PDH engineering ethics course is only applicable to New Mexico Professional Engineers.It is also offered as a recorded video presentation and as a live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of professional responsibility governing the practice of engineering in the State of New Mexico through the New Mexico Statutes: Chapter 61, Article 23, “Engineering and Surveying Practice Act” and the New Mexico Administrative Code: Title 16, Chapter 39, “Professional Engineering and Professional Surveying Rules”.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

This 2 PDH online PDH course is applicable to Professional Engineers licensed in the State of New Mexico and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete thirty (30) professional development hours, at least two (2) of which must be relative to the rules of professional responsibility, conduct and ethics. The remaining hours shall relate to the licensee's area of practice.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the New Mexico laws and rules regulating the practice of engineering in the State of New Mexico and their application to Professional Engineers
  • Understanding the rules of professional responsibility, professional conduct and engineering ethics
  • Familiarizing with the New Mexico disciplinary process and the range of violations and corresponding penalties imposed by the board
Course Document

In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for New Mexico Professional Engineers”.

To view, print and study the course document, please click on the following link(s):
Engineering Ethics for New Mexico Professional Engineers (125 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Evaluation and Design of Concrete Repairs
COURSE NO: C05-008
COURSE PROVIDER: Gilbert Gedeon, P.E.
Evaluation and Design of Concrete Repairs
Course Highlights

This online engineering PDH course provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying causes of that condition, and selecting an appropriate repair material and method for any deficiency found. A basic understanding of underlying causes of concrete deficiencies is essential to perform meaningful evaluations of concrete structures.

 

This 5 PDH online course is applicable to civil, geotechnical and structural engineers, as well as design and construction personnel working on construction projects involving evaluation and repair of concrete structures.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Evaluation of concrete in concrete structures
  • Understanding the underlying causes of distress and deterioration in concrete
  • Planning and design of concrete repairs
Course Document

In this professional engineering CEU course, you need to review Chapters 2, 3 and 4 of the US Corps of Engineers Publication EM 1110-2-2002, "Evaluation and Repair of Concrete Structures".

To view, print and study the course document, please click on the following link(s):
Evaluation and Design of Concrete Repairs (2.94 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 5 PDH credits. The quiz will be based on Chapters 2, 3 and 4 of this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Introduction to Shotcrete Applications
COURSE NO: C04-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Introduction to Shotcrete Applications
Course Highlights

This online engineering PDH course provides guidance on the selection, proportioning and application of shotcrete as a construction material. It explains the dry-mix process in which most of the mixing water is added at the nozzle. It also explains the wet-mix process in which all of the materials are mixed before entering the delivery hose.

 

This 4 PDH online course is applicable to civil, structural and geotechnical engineers, as well as design and construction personnel involved with the planning and design of structures using shotcrete.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning the different types of shotcrete and its applications
  • Knowing the types and properties of material used in shotcrete  
  • Understanding the dry- and wet-mixing and proportioning process
  • Understanding the pre-construction testing and evaluation process
  • Placing, finishing and curing of shotcrete
  • Maintaining and repairing surface defects of shotcrete
Course Document

In this professional engineering CEU course, you need to review the U.S. Corps of Engineers Publication EM 1110-2-2005, "Standard Practice for Shotcrete".

To view, print and study the course document, please click on the following link(s):
Introduction to Shotcrete Applications (1.39 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on this publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you may print your Certificate of Completion after we receive your payment.) For your convenience, we will also email you your Certificate of Completion. Also, you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: