Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

Courses by Provider

New Jersey Stormwater and Ethics 24 PDH Discount Package 2

PACKAGE NO: NJ24C-23
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Illicit Discharge Detection and Elimination
COURSE NO: C05-002
COURSE PROVIDER: Gilbert Gedeon, P.E.
Illicit Discharge Detection and Elimination
Course Highlights

This online engineering PDH course presents EPA's BMP for identifying and eliminating non-stormwater discharges to storm sewers to improve runoff stormwater quality.

 

Non-storm water discharges are typically the result of unauthorized connections of sanitary or process wastewater drains to storm sewers. These connections are common, yet often go undetected. Non-storm water discharges can include discharges of process water, air conditioner condensate, non-contact cooling water, vehicle wash water, or sanitary waste.

 

EPA recognizes that these discharges are significant sources of pollutants, and unless regulated by an NPDES permit, they are also illegal. Therefore the EPA published the Storm Water Phase II Rule on December 8, 1999, that describes a menu of Best Management Practices (BMP). “Illicit Discharge Detection and Elimination” is one of the Best Management Practices that requires operators of small MS4s in urbanized areas to identify and eliminate non-storm water discharges to storm sewers in order to improve runoff water quality.

 

This 5 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the detection and elimination of illicit discharges.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Types and methods of illicit discharges
  • Applicability
  • Siting and design criteria
  • Maintenance and cost considerations
Course Document
In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to “Illicit Discharge Detection and Elimination”. This BMP addresses the following:
  • Failing Septic Systems
  • Industrial/Business Connections
  • Recreational Sewage
  • Sanitary Sewer Overflows
  • Identifying Illicit Connections
  • Wastewater Connections to the Storm Drain System
  • Illegal Dumping
To view, print and study the course document, please click on the following link(s):
Illicit Discharge Detection and Elimination (1.16 MB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) question ns to earn 5 PDH credits. The quiz will be based on this EPA publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Developing Your Stormwater Pollution Prevention Plan (SWPPP)
COURSE NO: C04-057
COURSE PROVIDER: Gilbert Gedeon, P.E.
Developing Your Stormwater Pollution Prevention Plan (SWPPP)
Course Highlights

This online engineering PDH offers steps for planning how to prevent and contain stormwater pollution. It offers a step by step guide on what should be included in the plan, as well as helpful tips for how the plan can be maintained, adhered to, and exceeded in order to ensure a high level of quality.

 

Stormwater runoff is water from rain or snowmelt that does not immediately infiltrate into the ground and flows over or through natural or man-made storage or conveyance systems. When undeveloped areas are converted to land uses with impervious surfaces such as buildings, parking lots, and roads, the natural hydrology of the land is altered and can result in increased surface runoff rates, volumes, and pollutant loads.

 

This course provides useful tips about maintaining a SWPPP, as well as examples of and foresight into what can go wrong with various different kinds of materials which are commonly found at industrial sites. This includes solids, liquids, and waste. It also provides useful information on how to effectively and efficiently handle stormwater discharge in the event that control measures fail, and information on monitoring pollutants in stormwater discharge.

 

This 4 PDH online course is applicable to industrial, civil, environmental, and sustainability engineers as well as others interested in gaining a basic understanding about developing a stormwater pollution prevention plan.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding what causes stormwater pollution and its effects on the environment
  • Learning how to prevent and contain stormwater pollution
  • Learning how to develop a stormwater pollution prevention plan in order to be in compliance with a National Pollutant Discharge Elimination System permit
  • Learning how to analyze the particular pollutants in your stormwater discharge
Course Document
In this professional engineering CEU course, you need to review "Developing Your Stormwater Pollution Prevention Plan" a Guide for Industrial Operators by the Environmental Protection Agency (EPA), publication EPA 833-B-09-002, dated June 2015.
To view, print and study the course document, please click on the following link(s):
DEVELOPING YOUR STORMWATER POLLUTION PREVENTION PLAN (SWPPP) (3.4 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Construction Site Storm Water - Erosion Control
COURSE NO: C03-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Construction Site Storm Water - Erosion Control
Course Highlights

This online engineering PDH course presents EPA's control measures to minimize erosion at construction sites due to higher peak flow rates, increased flooding, etc.

 

Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.

 

EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on December 8, 1999, that describes a menu of Best Management Practices (BMP). “Construction Site Storm Water Runoff Control” is one of the Best Management Practices that requires operators of small MS4s in urbanized areas to implement a storm water management program for the protection of wetlands and aquatic ecosystems, improved quality of receiving water bodies, conservation of water resources, flood control, and protection of public health.

 

This 3 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of erosion controls for storm water runoff from construction sites.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills: 

  • Types and methods of erosion control systems
  • Applicability
  • Siting and design criteria
  • Maintenance and cost considerations
  • Effectiveness and limitations
Course Document

In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to the “Erosion Control” section of the “Construction Site Storm Water Runoff Control”. This section of the BMP addresses the following erosion control methods:

  • Chemical Stabilization
  • Mulching
  • Permanent Seeding
  • Sodding
  • Soil Roughening
  • Geotextiles
  • Gradient Terraces
  • Soil Retention
  • Temporary Slope Drain
  • Temporary Stream Crossings
  • Vegetated Buffer
  • Construction Sequencing
  • Dust Control
To view, print and study the course document, please click on the following link(s):
Construction Site Storm Water - Erosion Control (2.16 MB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the “Erosion Control” section of this EPA publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Post Construction Storm Water Management - Structural BMP's
COURSE NO: C10-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Post Construction Storm Water Management - Structural BMP's
Course Highlights

This online engineering PDH course describes EPA's stormwater BMP for protecting streams receiving runoff from alterations in hydraulic and aquatic characteristics.

 

Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.

 

EPA recognizes that such alterations can be prevented by implementing an effective storm water management program.  Therefore the EPA published the Storm Water Phase II Rule on December 8, 1999, that describes a menu of Best Management Practices (BMP). Post Construction Storm Water Management in New Development and Redevelopment” is one of the Best Management Practices that requires operators of small MS4s in urbanized areas to implement a storm water management program for the protection of wetlands and aquatic ecosystems, improved quality of receiving water bodies, conservation of water resources, flood control, and protection of public health.

 

This 10 PDH  online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of structural best management practices for post construction storm water management.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Types and methods of structural bmp for storm water management
  • Applicability
  • Siting and design criteria
  • Maintenance and cost considerations
  • Effectiveness and limitations
Course Document

In this professional engineering CEU course, you need to review EPA’s “Structural BMP” section of the “Post Construction Storm Water Management in New Development and Redevelopment”. This section of the BMP addresses the following:

  • Dry Extended Detention Ponds
  • Wet Ponds
  • Infiltration Trenches
  • Porous Pavements
  • Bioretention
  • Sand and Organic Filters
  • Storm Water Wetlands
  • Grassed Swales
  • Grassed Filter Strips
  • Catch Basins
  • In-line Storage
  • Manufactured Products for Storm Water Inlets
To view, print and study the course document, please click on the following link(s):
Post Construction SWM - Structural BMPs (1.05 MB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of forty (40) questions to earn 10 PDH credits. The quiz will be based on the “Structural BMP” section of this EPA publication.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for New Jersey Professional Engineers
COURSE NO: NJ2-005
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for New Jersey Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to New Jersey Professional Engineers.It is also offered as a recorded video presentation and as a live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of New Jersey. Excerpts from Title 45, Chapter 8 of the New Jersey Statutes and Title 13, Chapter 40 of the New Jersey Regulations, which relate to the rules of profession conduct are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Since engineers are faced with frequent moral and ethical dilemmas while practicing their engineering profession, this course will provide you with moral and ethical guidance in your decision making process. Most importantly, it will provide you with insight on how to conduct, respect and protect your engineering practice with the utmost professionalism.

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of New Jersey and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete twenty four (24) professional development hours, at least two (2) of which must be relative to the law and rules professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Overview of the laws and rules regulating the practice of engineering in the State of New Jersey
  • Understanding the roles of the New Jersey Board as well as its disciplinary authority
  • Learning about engineering ethics and the laws and rules of professional conduct and responsibility
  • Review of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for New Jersey Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
Engineering Ethics for New Jersey Professional Engineers (110 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire course document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: