Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Courses by Provider


CED Monthly

Subscribe and get 20% off

Your name:

Your e-mail:




FB Twitter LinkedIn

New Jersey Materials and Ethics 24 PDH Discount Package 1

PACKAGE NO: NJ24T-02
PACKAGE PDH: 24
PACKAGE PRICE: $288
To buy the package, please click on:
Courses in this Package
COURSE TITLE: An Introduction to Cathodic Protection
COURSE NO: T02-004
An Introduction to Cathodic Protection
Course Highlights

This online engineering PDH course provides an introduction to cathodic protection for underground structures such as tanks and pipelines. It covers the two principal methods used to mitigate corrosion: the sacrificial anode and impressed current systems.  It introduces you to the nine steps in designing a sacrificial anode system, the thirteen steps in designing an impressed current system, and the field testing requirements needed for both.

 

This 2 PDH online course is intended for engineers and other construction professionals with a current or prospective need to understand the fundamentals of protecting underground structures such as tanks and pipelines from corrosion using sacrificial anode and impressed current cathodic protection systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learn about the site testing requirements needed to design cathodic protection systems
  • Learn how to calculate current requirements based on coating efficiency and current density
  • Learn about the nine steps in designing a sacrificial anode system
  • Learn about the thirteen steps in designing an impressed current system
  • Learn how to calculate the number of anodes needed in both sacrificial anode and impressed current systems
  • Learn how to calculate system life expectancy for sacrificial anode systems
  • Learn how to calculate rectifier voltage for impressed current systems
Course Document

In this professional engineering CEU course, you need to review the course document titled, "An Introduction to Cathodic Protection".

To view, print and study the course document, please click on the following link(s):
An Introduction to Cathodic Protection (942 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Coating Application and Inspection
COURSE NO: T03-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Coating Application and Inspection
Course Highlights

This online engineering PDH course presents the technologies, techniques, advantages and limitations, equipment, typical coating types involved, and safety considerations for each type of application method.

 

The choice of an application method depends on the type of coating to be applied, the type and size of surface to be coated, and governing environmental regulations. There are various methods of coating application, including brush application, roller application, conventional spray, high volume-low pressure spray, airless spray, plural component spray, and electrostatic spray.

 

Approximately 85 percent of all premature coating failures are a result of poor surface preparation, inadequate mixing, thinning, and/or poor coating application. Onsite quality control inspection during surface preparation and coating application procedures can help prevent failures of these types. Proper inspection techniques must be combined with knowledgeable instrument use, good common sense, and thorough documentation of work activities and inspection checkpoints to help ensure specification compliance. The amount of inspection and the specific inspection checkpoints will vary with the type and size of the coating project. This course presents eleven quality control inspection procedures as follows:

  • Pre-surface preparation inspection
  • Ambient conditions
  • Compressed air cleanliness
  • Surface profile
  • Surface cleanliness
  • Paint storage, mixing, and thinning procedures
  • Application techniques
  • Wet and dry coating thickness
  • Pinhole detection
  • Adhesion
  • Cure

 

This 3 PDH online course is applicable to engineers, design and construction personnel, and other technical professionals who are interested in gaining a better understanding of coating application and inspection.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Methods of coating application
  • Documentation of coating applications
  • Pre-surface preparation inspection
  • Measurement of ambient conditions
  • Assessment of compressed air cleanliness
  • Measurement of surface profile
  • Evaluation of surface cleanliness
  • Paint storage, mixing, and thinning
  • Measurement of wet coating thickness
  • Nondestructive measurement of dry coating thickness
  • Destructive measurement of dry coating thickness
  • Cleanliness and time (cure) between coats
  • Holiday/pinhole detection
  • Adhesion testing and evaluation
Course Document

In this professional engineering CEU course, you need to review Chapters 8 and 9 of the “Painting: New Construction and Maintenance” engineering manual, published by the United States Army of Corps of Engineers (USACE), Publication Number EM 1110-2-3400.

To view, print and study the course document, please click on the following link(s):
Coating Application and Inspection (111 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on Chapters 8 and 9 of this USACE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Corrosion: Overview
COURSE NO: H04-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Corrosion: Overview
Course Highlights

This online engineering PDH course provides basic information on the chemical interaction taking place during the corrosion process between the environment and the corroding metal. It also describes preventive measure to minimize or control the corrosion process.

 

Uncontrolled corrosion can cause many serious problems. Corrosion occurs continuously, and every metal in every facility is subject to some type of corrosion. Even though corrosion cannot be eliminated, it can be controlled.

 

This 4 PDH  online course is applicable to chemical and environmental engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the theory of corrosion.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Corrosion theory
  • General corrosion
  • Crud and galvanic corrosion
  • Specialized corrosion
Course Document

In this professional engineering CEU course, you need to review Module 2, "Corrosion" of the Department of Energy Publication DOE-HDBK-1015/1-93, "Chemistry".

To view, print and study the course document, please click on the following link(s):
Corrosion - Overview (983 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Module 2 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Ethics for New Jersey Professional Engineers
COURSE NO: NJ2-005
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Ethics for New Jersey Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to New Jersey Professional Engineers.It is also offered as a recorded video presentation and as a live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH course presents the laws and rules of ethics and professional responsibility governing the practice of engineering in the State of New Jersey. Excerpts from Title 45, Chapter 8 of the New Jersey Statutes and Title 13, Chapter 40 of the New Jersey Regulations, which relate to the rules of profession conduct are presented in this course.

 

Engineering ethics is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

 

Since engineers are faced with frequent moral and ethical dilemmas while practicing their engineering profession, this course will provide you with moral and ethical guidance in your decision making process. Most importantly, it will provide you with insight on how to conduct, respect and protect your engineering practice with the utmost professionalism.

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of New Jersey and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete twenty four (24) professional development hours, at least two (2) of which must be relative to the law and rules professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education engineering course is intended to provide you with the following specific knowledge and skills:

  • Overview of the laws and rules regulating the practice of engineering in the State of New Jersey
  • Understanding the roles of the New Jersey Board as well as its disciplinary authority
  • Learning about engineering ethics and the laws and rules of professional conduct and responsibility
  • Review of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled “Engineering Ethics for New Jersey Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
Engineering Ethics for New Jersey Professional Engineers (110 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire course document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Pre-Coating Surface Preparation
COURSE NO: T02-003
COURSE PROVIDER: Gilbert Gedeon, P.E.
Pre-Coating Surface Preparation
Course Highlights

This online engineering PDH course describes surface preparation standards, common methods of surface preparation, and abrasive type and selection methods.

 

Surface preparation is the key factor in determining the success of a protective coating system. The equipment and techniques that can be used to achieve the desired surface cleanliness and roughness (profile) vary considerably. Traditional methods of surface preparation are now accompanied by new, innovative methods that have evolved mainly because of the issues surrounding the safe removal of lead-containing coatings from industrial structures. The ultimate objective of surface preparation is to create proper adhesion of a coating over an underlying substrate.

 

This 2 PDH online course is applicable to engineers, design and construction personnel, and other technical professionals who are interested in gaining a better understanding of surface preparation prior to coating applications.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Common methods of surface preparation
  • Abrasive type and selection
  • Surface preparation standards and specifications
Course Document

In this professional engineering CEU course, you need to review Chapter 7 of the "Panting: New Construction and Maintenance" engineering manual, published by the United States Army of Corps of Engineers (USACE), Publication Number EM 1110-2-3400.

To view, print and study the course document, please click on the following link(s):
Pre-Coating Surface Preparation (159 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twelve (12) questions to earn 2 PDH credits. The quiz will be based on Chapter 7 of this USACE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Structures and Properties of Metals
COURSE NO: T07-001
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Structures and Properties of Metals
Course Highlights

The online engineering PDH course addresses two aspects of metals. The first part of this course deals with the basic structures of metals and how those structures are affected by various processes. In addition, it contains information on the various imperfections and defects that the metal may sustain and how they affect the metal. The second part contains information on metal properties which are considered when selecting material for engineering design purposes. Each of these properties contains a discussion on how the property is affected and the metal's application.

 

This 7 PDH online course is applicable to structural and mechanical engineers, construction and design personnel, technical staff and facility operators who are interested in gaining a better understanding of the structures and properties of metals.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding bonding
  • Learning about common lattice types
  • Understanding grain structure and boundary
  • Learning about polymorphism and alloys
  • Knowing the imperfection in metals
  • Learning about stress and strain and Young's
  • Modulus Understanding stress-strain relationship
  • Understanding the physical properties of materials
  • Learning about working metals and corrosion
  • Understanding hydrogen embrittlement
Course Document

In this professional engineering CEU course, you need to review Modules 1 and 2, "Structures and Property of Metals" of the Department of Energy Publication DOE-HDBK-1017/1-93, "Material Science".

To view, print and study the course document, please click on the following link(s):
Structures and Properties of Metal (1.46 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty five (35) questions to earn 7 PDH credits. The quiz will be based on Modules 1 and 2 of this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Thermal Spraying Technology and Applications
COURSE NO: T04-002
COURSE PROVIDER: A. Bhatia
Thermal Spraying Technology and Applications
Course Highlights

This online engineering PDH course presents an overview of thermal spray technology and discusses thermal spray coating materials, processes, specifications, selection, surface preparation, application, inspection and testing, sealing, maintenance, and safety. This course will help readers to understand the different surface coating techniques for enhancing service life of their assets, boosting productivity and capacity of their machinery.

 

Most manufacturing and industrial equipments suffer heavy wear rates owing to their service conditions. Thermal spray coatings impart high-quality wear resistant properties to the base metal, which the base materials do not necessarily have. Thermal spraying is a surface coating technology by which metallic or nonmetallic materials are deposited in a molten or semi-molten condition onto a base metal surface to optimize its characteristics and to protect against wear, abrasion, corrosion and/or erosion. Numerous combinations of base material and coating material are possible.

 

This 4 PDH  online course is aimed at mechanical engineers, process engineers, facility managers, operational and maintenance personnel responsible for design and upkeep of equipment.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding the fundamental principles of thermal spray coatings
  • Learning the various types of thermal spray materials
  • Learning thermal spray coating cost and service life
  • Selecting the proper thermal spray coating for different service environments
  • Learning the different surface preparation techniques
  • Familiaring with thermal spray coating applications
  • Sealing and painting of thermal spray coatings
  • Inspection and testingof tThermal spray coating
  • Qualification of thermal spray applicator and equipment
  • Maintenance of thermal spray coatings
  • Taking safety precautions
  • Understanding the environment and worker protection regulations
Course Document

In this professional engineering CEU course, you need to review the U.S. Army Corps of Engineers, Publication 1110-2-3401, "Thermal Spraying: New Construction and Maintenance".

To view, print and study the course document, please click on the following link(s):
Thermal Spraying Technology and Application (956 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty five (25) questions to earn 4 PDH credits. The quiz will be based on this USACE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: