Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Courses by Provider


CED Monthly

Subscribe and get 20% off

Your name:

Your e-mail:




FB Twitter LinkedIn

Illinois Electrical 30 PDH Discount Package 1

PACKAGE NO: IL30E-04
PACKAGE PDH: 30
PACKAGE PRICE: $324
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Basic Direct Current (DC) Theory
COURSE NO: E03-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Basic Direct Current (DC) Theory
Course Highlights

This online engineering PDH course introduces the basic concepts of direct current (DC). It starts by describing the various types of DC sources. It explains the relevant DC circuit terminology. It demonstrates a series of basic DC circuit calculations by providing pertinent examples. It introduces conventional and electron flow and voltage polarity as well as defines Kirchhoff's Laws. Finally it discusses DC circuit analysis and faults.

 

This 3 PDH  online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the theory of direct current.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Identifying DC sources
  • Familiarizing with DC circuit terminology
  • Performing DC circuit calculations
  • Understanding voltage polarity and current direction
  • Knowing Kirchhoff's laws
  • Analyzing DC circuits and identifying circuit faults
Course Document

In this professional engineering CEU course, you need to review Module 2, "Basic DC Theory" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science". 

To view, print and study the course document, please click on the following link(s):
Basic Direct Current (DC) Theory (1.13 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 3 PDH credits. The quiz will be based on Module 2 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: An Introduction to Static Electricity and Lightning Protection Systems
COURSE NO: E02-018
An Introduction to Static Electricity and Lightning Protection Systems
Course Highlights

This online engineering PDH course provides technical guidance and design requirements for static electricity and lightning protection systems as well as related grounding systems for facilities and other structures. The information provided here may be utilized by electrical engineers in the development of the plans, specifications and calculations, and may serve as the minimum electrical design requirements.  Project conditions may dictate the need for a design that exceeds these minimum requirements.

 

Static electricity and lightning and protection systems are used to prevent or lessen damage from electrostatic discharges or lightning strikes to structures. These protection systems mitigate the fire hazards posed to structures. A static electricity or lightning protection system provides a low-impedance path for the electric current to lessen the heating effect of current flowing through flammable structural materials. If the current travels through porous and water-saturated materials, these materials may literally explode if their water content is flashed to steam by heat produced from the high current.

 

This 2 PDH online course is intended for electrical engineers, design professionals, construction managers and other technical personnel seeking an introduction to lightning and static electricity protection systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about key codes and standards
  • Learning about static grounding and bonding requirements
  • Understanding the importance of connections
  • Knowing the special considerations for static bus bars
  • Understanding how to employ ground grab bars
  • Knowing the special factors to consider at petroleum oil lubricant (POL) facilities
  • Learning about the design considerations at aircraft hangars
  • Leaning how to determine the requirements for lightning protection (LPS) systems
Course Document

In this professional engineering CEU course, you need to review the document titled, “An Introduction to Static Electricity and Lightning Protection Systems”.

To view, print and study the course document, please click on the following link(s):
An Introduction to Static Electricity and Lightning Protection Systems (360 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Alternating Current (AC) Systems
COURSE NO: E08-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Alternating Current (AC) Systems
Course Highlights

This online engineering PDH course introduces the basic concepts of alternating current (AC) electrical circuits and discusses the associated terminology. It describes inductance and capacitance and their effects on AC circuits. It presents power calculations for single-phase and three-phase AC circuits and includes the power triangle concept.

 

Furthermore, it describes the operating characteristics of AC generators and includes terminology, methods of voltage production, and methods of paralleling AC generation sources. This course also explains the basic operation and application of voltage regulators. Finally, it explains the theory of operation of AC motors and discusses the various types of AC motors and their application.

 

This 8 PDH  online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of AC systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding AC generation and analysis
  • Learning inductance, capacitance, impedance and resonance
  • Understanding the power triangle
  • Knowing three-phase circuits
  • Understanding AC generator components, theory and operation
  • Identifying and learning the different components of a voltage regulator
  • Understanding AC motors and different their types
  • Understanding the transformers and their different  types
Course Document

In this professional engineering CEU course, you need to review Modules 7 to 13 of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science" publication. 

To view, print and study the course document, please click on the following link(s):
Alternating Current Systems (2.1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty (40) questions to earn 8 PDH credits. The quiz will be based on Modules 7 to 13 of this DOE publication. 

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Arc Flash Resistant Equipment
COURSE NO: E02-019
Arc Flash Resistant Equipment
Course Highlights

This online engineering PDH course presents details that address IEEE and IEC equipment accessibility types, arc resistant ratings, and testing procedures according to IEEE standards.

 

Arc flash resistant equipment may be described as the equipment made to withstand the impact of internal arcing fault by meeting the testing requirements of IEEE Guide C37.20.7-2007. In the 1970s, an interest started in Europe in assessing electrical equipment under internal arcing, which lead to IEC standard. This research spread to North America and was used as a foundation for EEMAC G14-1 procedure. The development of IEEE standard heavily relies on Annex AA of IEC standard and adopts many of the refinements originated in EEMAC G14-1 procedure. IEC 62271-200 defines the requirements for factory assembled metal-enclosed switchgear and control gear for alternating currents at rated voltage above 1 kV and up to and including 52 kV. It includes indoor and outdoor assemblies and frequencies up to and including 60 Hz.

This 2 PDH online course is suitable for electrical engineers with a desire to find out more about arc flash resistant equipment. Upon successful completion engineers will have more information about usage of arc flash resistant equipment and its proper application.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Learning about the IEEE and IEC equipment accessibility types
  • Understanding arc resistant ratings
  • Testing according to IEEE standards
  • Familiarizing with equipment maintenance procedures
Course Document
In this professional engineering CEU course, you need to review the document titled, “Arc Flash Resistant Equipment” by Velimir Lackovic, Char. Eng.
To view, print and study the course document, please click on the following link(s):
Arc Flash Resistant Equipment (394 KB)
Course Quiz

Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: DC Circuits, Batteries, Generators and Motors
COURSE NO: E05-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
DC Circuits, Batteries, Generators and Motors
Course Highlights

This online engineering PDH course introduces the rules associated with the reactive components of inductance and capacitance and how they affect DC circuits. It also introduces batteries and describes the types of cells used, circuit arrangements, and associated hazards. This course further describes the types of DC generators and their application in terms of voltage production and load characteristics. Finally, it illustrates the types of DC motors and includes discussions of speed control, applications, and load characteristics.

 

This 5 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the basics of DC systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding inductance and capacitance
  • Learning battery terminology, battery theory, and battery operations
  • Understanding the different types of batteries and their hazards
  • Learning DC equipment terminology and construction
  • Gaining knowledge of DC generator theory and construction
  • Understanding DC motor theory and operation
  • Learning the different types of DC motors
Course Document

In this professional engineering CEU course, you need to review Modules 3 to 6 of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science".

To view, print and study the course document, please click on the following link(s):
DC Circuits, Batteries, Generators and Motors (1.76 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty (30) questions to earn 5 PDH credits. The quiz will be based on Modules 3 to 6 of this DOE publication. 

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Motor and Drive System Basics
COURSE NO: E02-021
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Motor and Drive System Basics
Course Highlights

This online engineering PDH course presents the basics of motor and drive systems and briefly describes important terms, relationships, and system design considerations. It also describes key factors involved in motor and drive selection and system design, and provides an overview of the different types of motors and drives and their applications.

 

This 2 PDH online course is applicable to electrical and mechanical engineers, designers, contractors, building professionals and manufacturers who are involved with motor and drive systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Detecting the indications of a poor system design
  • Learning about the different types of electric motors
  • Understanding motor operating characteristics
  • Selecting motors and drives for their corresponding applications
  • Understanding load duty cycles
  • Familiarizing with common motor selection problems
Course Document
In this professional engineering CEU course, you need to review Section 1, "Motor and Drive System Basics "of the Department of Energy (DOE) Publication "Improving Motor and Drive System Performance".
To view, print and study the course document, please click on the following link(s):
Motor and Drive System Basics (960 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Electrical Distribution Systems
COURSE NO: E02-004
COURSE PROVIDER: Gilbert Gedeon, P.E.
Electrical Distribution Systems
Course Highlights

This online engineering PDH course describes basic electrical distribution systems including system components and protection devices. It also presents the characteristics of system design, such as circuit breakers, motor controllers, wiring schemes and grounding, to ensure personnel and equipment safety.

 

This 2 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of electrical distribution systems.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding of system components and protection devices
  • Learning about circuit breakers and motor controllers
  • Understanding wiring schemes and grounding
Course Document

In this professional engineering CEU course, you need to review Module 15, "Electrical Distribution Systems" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science".

To view, print and study the course document, please click on the following link(s):
Electrical Distribution Systems (2.50 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on Module 15 of this DOE publication. 

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Basic Electrical Theory
COURSE NO: E04-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Basic Electrical Theory
Course Highlights

This online engineering PDH course introduces basic electrical concepts. It starts by explaining the concept of the electrostatic force and the first law of electrostatics. It defines the basic electrical terminology and its corresponding units of measure. It continues to describe the methods of producing electricity. It also describes the principle of magnetism and magnetic circuits. Finally it provides a list of basic electrical symbols used to read and interpret electrical system diagrams and schematics.

 

This 4 PDH online course is applicable to electrical and computer engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the theory of electricity.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding atoms and their forces
  • Distinguishing electrical components conductors, insulators and resistors
  • Understanding voltage and current
  • Learning the units of electrical measurements
  • Identifying the methods of producing voltage
  • Understanding magnetism and magnetic circuits
Course Document

In this professional engineering CEU course, you need to review Module 1, "Basic Electrical Theory" of the Department of Energy Publication DOE-HDBK-1011/2-92, "Electrical Science". 

To view, print and study the course document, please click on the following link(s):
Basic Electrical Theory (1.39 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Module 1 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Transformer Protection
COURSE NO: E01-006
COURSE PROVIDER: Andre LeBleu, P.E.
Transformer Protection
Course Highlights

This online engineering PDH course provides guidance on the different applications of transformer power system protection of two winding three phase transformers. It explains the different applications, where they are used and the pros and cons for each type of system.

 

This 1 PDH online course is applicable to electrical engineers that design and or operate power systems that range from 15kV to 480V.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding technical concerns regarding transformer protection
  • Learning about the technical applications for transformer protection
  • Understanding the basics of each type application
  • Learning about the pro and con explanation for each type of application
Course Document

In this professional engineering CEU course, you need to review the course document titled, "Transformer Protection".

To view, print and study the course document, please click on the following link(s):
Transformer Protection (114 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 1 PDH credit. The quiz will be based on this entire course document.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Sexual Harassment Prevention for Illinois Professionals
COURSE NO: IL1-001
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Sexual Harassment Prevention for Illinois Professionals
Accepted in:
Course Highlights

This online PDH course presents a training on sexual harassment prevention in order to adopt and actively implement policies that ensure that workplaces are safe for employees to report and express their concerns about sexual harassment.

 

The Illinois Human Rights Act makes it a civil rights violation “[f]or any employer, employee, agent of any employer, employment agency or labor organization to engage in sexual harassment.” 775 ILCS 5/2-102(D).

 

The Illinois General Assembly finds that tolerance of sexual harassment has a detrimental influence in workplaces by creating a hostile environment for employees, reducing productivity, and increasing legal liability. Therefore, every employer in the State of Illinois is required to provide employees with sexual harassment prevention training that complies with section 2-109 of the Illinois Human Rights Act (“IHRA”).

 

This 1 PDH online course is applicable to professionals licensed in the State of Illinois and who are required to demonstrate continuing professional competency in sexual harassment prevention training as a condition of their license renewal.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Gaining an overview of sexual harassment prevention consistent with the Illinois Human Rights Act
  • Familiarizing with types of unlawful sexual harassment, unwelcome behavior and working environment
  • Learning about examples of conduct that may constitute unlawful sexual harassment
  • Understanding sexual harassment in online environments
  • Understanding employer responsibilities in the prevention, investigation, and corrective measures on sexual harassment
  • Familiarizing with the Federal and State statutory laws concerning sexual harassment including remedies available to victims
Course Document
In this professional engineering CEU course, you need to review the course document titled “Sexual Harassment Prevention for Illinois Professionals” which is based on the DHR document “State of Illinois Sexual Harassment Prevention Training”.
To view, print and study the course document, please click on the following link(s):
SEXUAL HARASSMENT PREVENTION FOR ILLINOIS PROFESSIONALS (200 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 1 PDH credit. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: